Isolite® 3 was designed to install easily in most dental operatories.
Suction Canister With Available HVE Port
Step 1 Attach the end of the vacuum connector hose to the chair suction port.
Step 2 Place the Control Head Hose on an empty slot on the tool bar.
Step 3 Connect the Power Vacuum Base onto the vacuum connector hose.
Step 4 Plug in the power adapter to a standard 120V wall power source or have a chair technician hardwire using the supplied direct-to-chair connection cable.
Step 5 Plug in the electrical connector to the top of the Power Vacuum Base.
Step 6 Confirm the light on the PowerVacuum Base is solid blue. Refer to “Using the Power Vacuum Base LED Indicator” section in the IFU if the light is not solid blue.
Step 7 Rotate the suction selection dial to the desired setting.
Suction Canister Without Available HVE Port
Step 1 Unscrew the black screw cap from the PVB accessory port.
Step 2 Screw the provided hose barb into the PVB accessory port.
Step 3 Remove existing HVE tubing from the chair suction port.
Step 4 Attach the end of the vacuum connector hose to the chair suction port.
Step 5 Place the Control Head Hose in an empty slot on the tool bar.
Step 6 Connect the Power Vacuum Base onto the vacuum connector hose.
Step 7 Plug in the power adapter to a standard 120V wall power source or have a chair technician hardwire using the supplied direct-to-chair connection cable.
Step 8 Plug in the electrical connector to the top of the Power Vacuum Base.
Step 9 Confirm the light on the PowerVacuum Base is solid blue. Refer to “Using the Power Vacuum Base LED Indicator" section in the IFU if the light is not solid blue.
Step 10 Rotate the suction selection dial to the desired setting.
Step 11 Rotate the dial down to "All" suction selection.