Core Build-up Materials

Core build-up materials are used when there is not enough healthy tooth left for proper crown placement. Building up the core of the tooth with resin or plastic composites allows for better retention of the crown and reduced sensitivity while strengthening the tooth itself. Composition of core build-up materials should be close to that of dentin. Core build-up materials may be light-cured, self-cured or dual cured. A benefit of dual cure is the assurance of complete curing even in areas that may be hard to reach for the curing light. Curing times vary but are often completed within 5 minutes. Vendors often offer a compatible natural or opaque shade as well as a contrasting color for easy core identification. For easy application, many vendors offer auto-mix syringes with needle tips for perfect placement, many of these are self-adhesive, however be sure to inquire whether a bonding agent is needed. There are a multitude of core build-up products on the market, research and choose the product that will best fit in with your needs.
CompanyGC America Inc.GC America Inc.GC America Inc.GC America Inc.GC America Inc.
ItemGC Fuji IX GP FAST Packable Posterior RestorativeGC Fuji II Glass Ionomer RestorativeGC Fuji IX GP EXTRA Packable Glass IonomerGC Fuji IX GP Packable Posterior RestorativeGradia Core Composite for Core Build-Up for Post Cementation
Reviews
PriceInquireInquireInquireInquireInquire
DescriptionGC Fuji IX GP FAST is the fast setting version of GC Fuji IX GP, a strong, wear-resistant multipurpose glass ionomer restorative. This product GC Fuji II is a self-cured, glass ionomer restorative featuring high resistance to water which can be finished in just 15 minutes (under water spray).While maintaining the ample working time of Fuji IX GP FAST (1 1/4 minutes), Fuji IX GP EXTRA allows final finishing in only 2 1/2 minutes from GC Fuji IX GP is the easy-to-use, handle and place fluoride releasing alternative to expensive compomers and composites and in many cases, amalgam. ItGRADIA CORE has a one-step, self-etching bonding system and easy mixing system, which results in a homogeneous mix of the two paste components. The
Quantity1 Cavity Conditioner (5.7 mL)
1 GC Fuji Coat LC (5.2 mL)
50 Capsules (10 Each of A2, A3, A3.5, B2, B3)
Capsule Applier
000101 / 000102 / 000103 - 1 Bottle Liquid (8 mL), 1 Bottle Powder (15 g), Measuring Scoop, Mixing Cup
000113 - 10 Capsules (5 Each of #21 and #26), 30 Capsules (10 Each of #22, #22.5, #23M)
1 Cavity Conditioner (5.2 mL)
1 Fuji COAT LC (5.7 mL)
50 Capsules (10 Each of A2, A3, A3.5, B1, B3)
Capsule Applier
439153 - 1 Cavity Conditioner (5.7 mL), 1 GC Fuji Coat LC (5.2 mL), 50 Capsules (10 Each of A2, A3, A3.5, B2 B3), GC Fuji Capsule Applier
439901 - 1 Cavity Conditioner (5.7 mL), 1 GC Fuji Coat LC (5.2 mL), 1 Liquid (8 g), 1 Powder (15 g) (A2)
1 Cartridge (10 mL)
20 Intra-Oral Nozzles
20 Mixing Tips
Dispensing Dish
Micro Tip Applicator
Micro Tip Holder
Self-Etching Bond Liquid A
Self-Etching Bond Liquid B
Cure TypeSelf CureSelf CureSelf CureNot AvailableDual Cure
Compressive Strength38,870 psi (268 MPa)Not AvailableNot Available31,908 psi (220 MPa)39,595 psi (273 MPa)
Set Time2 minutes000101 / 000102 / 000103 - 5 minute 30 seconds
000113 - 2 minutes 20 seconds
2 minutes2 minutes 20 seconds10 seconds
Material TypePackable Glass IonomerGlass IonomerPackable Glass IonomerPackable Glass IonomerComposite
Bonding Agent NeededYesNot AvailableYesYesYes
Bond StrengthBovine Dentin - 841 psi (5.8 MPa)
Bovine Enamel - 957 psi (6.6 MPa)
Not AvailableNot AvailableBovine Dentin - 638 psi (4.4 MPa)
Bovine Enamel - 856 psi (5.9 MPa)
Dentin - 3,147 psi (21.7 MPa)
Enamel - 3,133 (21.6 MPa)
Tensile Strength3,336 psi (23 MPa)Not AvailableNot Available3,191 psi (22 MPa)Not Available
ShadesA2
A3
A3.5
B2
B3
#21 (Pale Yellow)
#22 (Yellow Brown)
#22.5 (Gray Brown)
#23 (Dark Gray)
#23M (Deep Gray)
#26 (Deep Brown)
A2
A3
A3.5
B1
B3
A2
A3
A3.5
B2
B3
Not Available
DispensingCapsuleBottle
Capsule
CapsuleCapsuleDispensing Gun
Get InfoInquireInquireInquireInquireInquire
-->