Core Build-up Materials

Core build-up materials are used when there is not enough healthy tooth left for proper crown placement. Building up the core of the tooth with resin or plastic composites allows for better retention of the crown and reduced sensitivity while strengthening the tooth itself. Composition of core build-up materials should be close to that of dentin. Core build-up materials may be light-cured, self-cured or dual cured. A benefit of dual cure is the assurance of complete curing even in areas that may be hard to reach for the curing light. Curing times vary but are often completed within 5 minutes. Vendors often offer a compatible natural or opaque shade as well as a contrasting color for easy core identification. For easy application, many vendors offer auto-mix syringes with needle tips for perfect placement, many of these are self-adhesive, however be sure to inquire whether a bonding agent is needed. There are a multitude of core build-up products on the market, research and choose the product that will best fit in with your needs.
CompanyGC America Inc.GC America Inc.GC America Inc.GC America Inc.GC America Inc.
ItemGC Fuji II LC Glass Ionomer RestorativeGC Fuji IX GP EXTRA Packable Glass IonomerGC Fuji IX GP Packable Posterior RestorativeGradia Core Composite for Core Build-Up for Post CementationMiracle Mix Metal-Reinforced Crown and Core Build-Up
PriceInquireInquireInquireInquireInquire
DescriptionGC Fuji II LC has smaller glass particles which allow greater density and assures a smoother, glossier, more attractive finish. The harder material While maintaining the ample working time of Fuji IX GP FAST (1 1/4 minutes), Fuji IX GP EXTRA allows final finishing in only 2 1/2 minutes from GC Fuji IX GP is the easy-to-use, handle and place fluoride releasing alternative to expensive compomers and composites and in many cases, amalgam. ItGRADIA CORE has a one-step, self-etching bonding system and easy mixing system, which results in a homogeneous mix of the two paste components. The Miracle Mix offers the proven formula of glass ionomer cement with 100% fine, silver alloy powder for lasting core build-ups, block-outs and repair.
Quantity436400 - 25 Powder (0.33 g) / Liquid (0.085 mL) Capsules (5 Each of A1, A2, A3, B2, C2)
436700 - 25 Powder (0.33 g) / Liquid (0.085 mL) Capsules (5 Each of A3.5, A4, B3, B4, C4)
1 Cavity Conditioner (5.2 mL)
1 Fuji COAT LC (5.7 mL)
50 Capsules (10 Each of A2, A3, A3.5, B1, B3)
Capsule Applier
439153 - 1 Cavity Conditioner (5.7 mL), 1 GC Fuji Coat LC (5.2 mL), 50 Capsules (10 Each of A2, A3, A3.5, B2 B3), GC Fuji Capsule Applier
439901 - 1 Cavity Conditioner (5.7 mL), 1 GC Fuji Coat LC (5.2 mL), 1 Liquid (8 g), 1 Powder (15 g) (A2)
1 Cartridge (10 mL)
20 Intra-Oral Nozzles
20 Mixing Tips
Dispensing Dish
Micro Tip Applicator
Micro Tip Holder
Self-Etching Bond Liquid A
Self-Etching Bond Liquid B
000124 - 50 Capsules
000239 - 1 Alloy Powder (17 g), 1 Liquid (10 g), 1 Powder (15 g)
Cure TypeLight CureSelf CureNot AvailableDual CureSelf Cure
Compressive StrengthNot AvailableNot Available31,908 psi (220 MPa)39,595 psi (273 MPa)Not Available
Set Time20 seconds2 minutes2 minutes 20 seconds10 seconds000124 - 5 minutes
000239 - 5 - 5.5 minutes
Material TypeGlass IonomerPackable Glass IonomerPackable Glass IonomerCompositeSilver Alloy Glass Ionomer
Bonding Agent NeededNot AvailableYesYesYesNot Available
Bond StrengthNot AvailableNot AvailableBovine Dentin - 638 psi (4.4 MPa)
Bovine Enamel - 856 psi (5.9 MPa)
Dentin - 3,147 psi (21.7 MPa)
Enamel - 3,133 (21.6 MPa)
Not Available
Tensile StrengthNot AvailableNot Available3,191 psi (22 MPa)Not AvailableNot Available
ShadesA1
A2
A3
A3.5
A4
B2
B3
B4
C2
C4
A2
A3
A3.5
B1
B3
A2
A3
A3.5
B2
B3
Not AvailableNot Available
DispensingBottleCapsuleCapsuleDispensing GunBottle
Capsule
Get InfoInquireInquireInquireInquireInquire
-->