Core Build-up Materials

Core build-up materials are used when there is not enough healthy tooth left for proper crown placement. Building up the core of the tooth with resin or plastic composites allows for better retention of the crown and reduced sensitivity while strengthening the tooth itself. Composition of core build-up materials should be close to that of dentin. Core build-up materials may be light-cured, self-cured or dual cured. A benefit of dual cure is the assurance of complete curing even in areas that may be hard to reach for the curing light. Curing times vary but are often completed within 5 minutes. Vendors often offer a compatible natural or opaque shade as well as a contrasting color for easy core identification. For easy application, many vendors offer auto-mix syringes with needle tips for perfect placement, many of these are self-adhesive, however be sure to inquire whether a bonding agent is needed. There are a multitude of core build-up products on the market, research and choose the product that will best fit in with your needs.
CompanyGC America Inc.GC America Inc.GC America Inc.GC America Inc.GC America Inc.
ItemMiracle Mix Metal-Reinforced Crown and Core Build-UpGC Fuji II LC Glass Ionomer RestorativeGC Fuji IX GP FAST Packable Posterior RestorativeGC Fuji IX GP Packable Posterior RestorativeGradia Core Composite for Core Build-Up for Post Cementation
PriceInquireInquireInquireInquireInquire
DescriptionMiracle Mix offers the proven formula of glass ionomer cement with 100% fine, silver alloy powder for lasting core build-ups, block-outs and repair.GC Fuji II LC has smaller glass particles which allow greater density and assures a smoother, glossier, more attractive finish. The harder material GC Fuji IX GP FAST is the fast setting version of GC Fuji IX GP, a strong, wear-resistant multipurpose glass ionomer restorative. This product GC Fuji IX GP is the easy-to-use, handle and place fluoride releasing alternative to expensive compomers and composites and in many cases, amalgam. ItGRADIA CORE has a one-step, self-etching bonding system and easy mixing system, which results in a homogeneous mix of the two paste components. The
Quantity000124 - 50 Capsules
000239 - 1 Alloy Powder (17 g), 1 Liquid (10 g), 1 Powder (15 g)
436400 - 25 Powder (0.33 g) / Liquid (0.085 mL) Capsules (5 Each of A1, A2, A3, B2, C2)
436700 - 25 Powder (0.33 g) / Liquid (0.085 mL) Capsules (5 Each of A3.5, A4, B3, B4, C4)
1 Cavity Conditioner (5.7 mL)
1 GC Fuji Coat LC (5.2 mL)
50 Capsules (10 Each of A2, A3, A3.5, B2, B3)
Capsule Applier
439153 - 1 Cavity Conditioner (5.7 mL), 1 GC Fuji Coat LC (5.2 mL), 50 Capsules (10 Each of A2, A3, A3.5, B2 B3), GC Fuji Capsule Applier
439901 - 1 Cavity Conditioner (5.7 mL), 1 GC Fuji Coat LC (5.2 mL), 1 Liquid (8 g), 1 Powder (15 g) (A2)
1 Cartridge (10 mL)
20 Intra-Oral Nozzles
20 Mixing Tips
Dispensing Dish
Micro Tip Applicator
Micro Tip Holder
Self-Etching Bond Liquid A
Self-Etching Bond Liquid B
Cure TypeSelf CureLight CureSelf CureNot AvailableDual Cure
Compressive StrengthNot AvailableNot Available38,870 psi (268 MPa)31,908 psi (220 MPa)39,595 psi (273 MPa)
Set Time000124 - 5 minutes
000239 - 5 - 5.5 minutes
20 seconds2 minutes2 minutes 20 seconds10 seconds
Material TypeSilver Alloy Glass IonomerGlass IonomerPackable Glass IonomerPackable Glass IonomerComposite
Bonding Agent NeededNot AvailableNot AvailableYesYesYes
Bond StrengthNot AvailableNot AvailableBovine Dentin - 841 psi (5.8 MPa)
Bovine Enamel - 957 psi (6.6 MPa)
Bovine Dentin - 638 psi (4.4 MPa)
Bovine Enamel - 856 psi (5.9 MPa)
Dentin - 3,147 psi (21.7 MPa)
Enamel - 3,133 (21.6 MPa)
Tensile StrengthNot AvailableNot Available3,336 psi (23 MPa)3,191 psi (22 MPa)Not Available
ShadesNot AvailableA1
A2
A3
A3.5
A4
B2
B3
B4
C2
C4
A2
A3
A3.5
B2
B3
A2
A3
A3.5
B2
B3
Not Available
DispensingBottle
Capsule
BottleCapsuleCapsuleDispensing Gun
Get InfoInquireInquireInquireInquireInquire
-->