Stone Hardeners and Glazes

Stone hardeners and glazes are used to create sturdier dental models and to protect them after they have been poured. Whether applied during the gypsum mixing process such as in the case of hardeners, or painted on after the model has been poured as in the case of glazes, these materials make dental models stronger and more able to hold up and retain their accuracy while being used to fabricate a dental restoration. When using a hardener, be sure to apply the proper mix with the gypsum. When using a glaze be sure to apply a thin, even layer in order to maintain the model's proper dimensions.
CompanyWhip Mix CorporationAmerican Dental Supply, Inc.George Taub Products
ItemGypsum HardenerClear-Coat and Model HardnerStone Die and Plaster Hardener
PriceInquireInquireInquire
DescriptionReplaces water as the gauging liquid for mixing with gypsum materials where increased hardness and reduced brittleness are desired; will also improve Provides instant protection for stone models and die materials. Penetrates dies and creates a clear, hard, glossy, tough surface. Prevents abrasion A liquid plastic applied to any stone die, plaster or stone model. Impregnates stone—sets in 3 - 5 min. Does not effect dimensions of die. Waterproofs
Quantity450 mL (1 pint) Bottle
3.75 L (1 gallon) Container
15 L (4 gallon) Case		113 g (4 ounces) Model Hardener
118 mL (4 ounces) Solvent		Standard Kit:
2 ounces Liquid Resin and 2 ounces Thinner
Special Kit:
8 ounces Liquid Resin and 8 ounces Thinner
16 ounces Liquid Resin and 16 ounces Thinner
32 ounces Liquid Resin and 32 ounces Thinner
Individual Resin:
2 ounces Resin Bottle
8 ounces (1/2 pint) Can
16 ounces (1 pint) Can
32 ounces (quart) Can
Individual Thinners:
2 ounces Thinner Bottle
8 ounces Thinner Can
16 ounces Thinner Can
32 ounces Thinner Can
ApplicationWater SubsituteProtection for stone models and die materials (penetrates dies and creates a clear, hard, glossy, tough surface).Impregnates Stone
Get InfoNot AvailableNot AvailableNot Available
-->