Investment Materials

Dental investment materials are used to encase the wax designed for the lost wax casting technique. These materials are usually available as a powder that is mixed with water and then used to encase the wax design. These materials solidify and can withstand the heat of the casting furnace to hold the precise shape left behind when the wax is burned out. Different gypsums are designed for use with different dental alloys or other materials, so be sure to select the proper gypsum for the case at hand.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemHi Temp Carbon-Free InvestmentCera-Fina Carbon-Free Fine Grained InvestmentFastFire 15 Phosphate InvestmentNovocast Investment MaterialResinVest
PriceInquireInquireInquireInquireInquire
DescriptionA special investment for non-precious and semi-precious alloys. HI-TEMP contains no carbon. Non-precious metal alloys require an investment specially CERA-FINA is a carbon-free phosphate investment developed for professionals who demand a more finely grained investment. It is designed for use with FASTFIRE 15 is a fine grain phosphate investment which requires only a 15 minute benchset before placing molds into a hot oven for rapid burnout. It NOVOCAST is an advanced inlay investment that provides increased accuracy for casting conventional gold alloys at a mold temperature of 650 degrees C Designed for burning out printed or milled resin patterns for crowns, bridges, or frameworks, ResinVest is a fiber-reinforced material that resists
Quantity144 - 90 g Package
144 - 60 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		9 kg (20 pounds) Carton
24 - 90 g Package
144 - 60 g Package
144 - 90 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		100 - 90 g Package
150 - 60 g Package
25 - 90 g Package
25 - 60 g Package
340 mL Bottle
1 L Bottle
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
9 kg (2 pounds) Carton		9 kg (20 pounds) Carton
24 - 50 g Package
24 - 75 g Package
144 - 50 g Package
144 - 75 g Package		100 g Package; 55 lbs. Carton
Compressive StrengthWet - 1,500 psi (10 MPa)Wet - 600 psi (4 MPa)Wet - 500 psi (3.4 MPa)Wet - 950 psi (7 MPa)1,350 psi (9.2 MPa)
Working Time7 - 8 minutes8 - 10 minutes7 - 9 minutes3 minutes6 to 8 Minutes
Set TimeNot AvailableNot AvailableNot Available15 minutes30 Minutes Minimum
Material TypeCarbon-Free Phosphate BondedCarbon-free Phosphate Bonded InvestmentFine Grain PhosphateGypsum Bonded InvestmentPhosphate Investment
Indication For UseHigh Fusing AlloysHigh Fusing AlloysUniversal Phosphate Investment for All Crown and Bridge AlloysLow Fusing Crown and Bridge AlloysBurning out milled or printed resin patterns
Liquid / Powder Ratio16 mL / 100 g24 mL / 100 g27 mL / 100 g34 mL / 100 g22 ml/100 g
Setting Expansion0.7 %0.25 %1 %0.45 %1.6 Percent
Ready For Burnout60 minutes90 minutes15 minutes30 minutesYes
Hygroscopic ExpansionN / AN / AN / AN / ANot Available
Thermal Expansion1.2 %1.3 %1.0 %650° C - 1.20 %0.65 Percent
Metal or Ringless TechniqueMetal or RinglessMetal or RinglessMetal or RinglessMetal OnlyBoth
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->