Investment Materials

Dental investment materials are used to encase the wax designed for the lost wax casting technique. These materials are usually available as a powder that is mixed with water and then used to encase the wax design. These materials solidify and can withstand the heat of the casting furnace to hold the precise shape left behind when the wax is burned out. Different gypsums are designed for use with different dental alloys or other materials, so be sure to select the proper gypsum for the case at hand.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemBeauty-Cast Gypsum InvestmentCera-Fina Carbon-Free Fine Grained InvestmentCristobalite Investment MaterialFastFire 15 Phosphate InvestmentHi Temp Carbon-Free Investment
PriceInquireInquireInquireInquireInquire
DescriptionThe proven standard for the Hygroscopic Technique. Also excellent for the High Heat Technique.CERA-FINA is a carbon-free phosphate investment developed for professionals who demand a more finely grained investment. It is designed for use with The principal ingredient, CRISTOBALITE, gives high thermal expansion, even at comparatively low temperatures. It is possible to use the same creamy FASTFIRE 15 is a fine grain phosphate investment which requires only a 15 minute benchset before placing molds into a hot oven for rapid burnout. It A special investment for non-precious and semi-precious alloys. HI-TEMP contains no carbon. Non-precious metal alloys require an investment specially
Quantity144 - 75 g Package
144 - 50 g Package
24 - 50 g Package
11 kg (25 pounds) Carton		9 kg (20 pounds) Carton
24 - 90 g Package
144 - 60 g Package
144 - 90 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		144 - 50 g Package100 - 90 g Package
150 - 60 g Package
25 - 90 g Package
25 - 60 g Package
340 mL Bottle
1 L Bottle
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
9 kg (2 pounds) Carton		144 - 90 g Package
144 - 60 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle
Compressive StrengthWet - 700 psi (5 MPa)Wet - 600 psi (4 MPa)Wet - 700 psi (5 MPa)Wet - 500 psi (3.4 MPa)Wet - 1,500 psi (10 MPa)
Working Time3 minutes8 - 10 minutes3 minutes7 - 9 minutes7 - 8 minutes
Set Time14.5 minutesNot Available16 minutesNot AvailableNot Available
Material TypeGypsum Casting InvestmentCarbon-free Phosphate Bonded InvestmentGypsum Bonded InvestmentFine Grain PhosphateCarbon-Free Phosphate Bonded
Indication For UseLow Fusing Crown and Bridge AlloysHigh Fusing AlloysLow Fusing Crown and Bridge AlloysUniversal Phosphate Investment for All Crown and Bridge AlloysHigh Fusing Alloys
Liquid / Powder Ratio30 mL/100 g24 mL / 100 g30 mL / 100 g27 mL / 100 g16 mL / 100 g
Setting Expansion0.4 %0.25 %0.5 %1 %0.7 %
Ready For Burnout30 minutes90 minutes30 minutes15 minutes60 minutes
Hygroscopic Expansion1.5 %N / ANot AvailableN / AN / A
Thermal Expansion480º C (900º F) - 0.55%
650º C (1,200º F) - 1.20%		1.3 %650º C (1,200º F) - 1.25 %1.0 %1.2 %
Metal or Ringless TechniqueMetal OnlyMetal or RinglessMetal OnlyMetal or RinglessMetal or Ringless
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->