Lab Gypsum Materials

Dental lab gypsum materials are used to create highly accurate model from a physical impression of a patient's teeth. The models are fabricated by pouring the gypsum material into the impression and allowing it to harden. There are a wide range of gypsums used in dentistry with different properties depending on how the models will be used. Some gypsums are ideal for use in sectioned models and dies, others are designed to be scanned for use in CAD/CAM dentistry, while other model materials are designed for use in vacuum-forming orthodontic appliances, mouth guards or other appliances. It is important to be sure your gypsum is properly set and be sure to properly label your models and dies so they stay with the correct case.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemResinRock XL5 GypsumFlowStone FS GypsumLean Rock XL5Microstone GypsumQuickStone Laboratory Stone
PriceInquireInquireInquireInquireInquire
DescriptionRESINROCK XL5 has the same smoothness and high abrasion as in ResinRock. However, this ISO Type 5 die stone gives you increased expansion to Flowstone FS sets 50% faster than typical stone products. Early high strength allows separation from base mold in 15 minutes. Use Flowstone FS with Lean Rock XL5, ISO Type 5 die stone, offers increased expansion to compensate for shrinkage of vinyl polysiloxane and other rubber-based impression MICROSTONE's fine particle size and dense surface make it our finest general purpose laboratory stone. It is especially suited for processing acrylic QUICKSTONE is an economical dental stone with consistent handling properties. Its smooth creamy mix makes it ideal for a variety of lab procedures.
Quantity25 kg (55 pounds)22.7 kg (50 lbs) Carton11 kg (25 pounds)
25 kb (55 pounds)		11 kg (25 pounds)
22 kg (50 pounds)
80 Packages (140 g)		11 kg (25 pounds)
22 kg (50 pounds)
Compressive Strength11,000 psi (76 MPa)12,000 psi (83 MPa)7,200 psi (49.64 MPa)8,500 psi (59 MPa)8,000 psi (55 MPa)
Working Time5 - 7 minutes4 - 6 minutes4 - 5 minutes5 - 7 minutes3 - 5 minutes
Set Time10 minutes8 minutes5 - 7 minutes13 minutes10 minutes
Indication For UseCrown And BridgeFluid, Low Expansion Base StoneSmall Batch ProcessingAcrylic DenturesVariety Of Lab Procedures
Liquid / Powder Ratio20 mL / 100 g23 - 24 mL / 100 g21 mL / 100 g28 mL / 100 g28 mL / 100 g
Setting Expansion0.20%0.08%0.20%0.12%0.14%
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->