Lab Gypsum Materials

Dental lab gypsum materials are used to create highly accurate model from a physical impression of a patient's teeth. The models are fabricated by pouring the gypsum material into the impression and allowing it to harden. There are a wide range of gypsums used in dentistry with different properties depending on how the models will be used. Some gypsums are ideal for use in sectioned models and dies, others are designed to be scanned for use in CAD/CAM dentistry, while other model materials are designed for use in vacuum-forming orthodontic appliances, mouth guards or other appliances. It is important to be sure your gypsum is properly set and be sure to properly label your models and dies so they stay with the correct case.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemMounting Stone GypsumBitestoneFlowStone FS GypsumPrima-Rock GypsumQuickStone Laboratory Stone
PriceInquireInquireInquireInquireInquire
DescriptionA very hard, fast setting gypsum material formulated expressly for mounting casts to articulators. Its very low setting expansion prevents An extremely fast setting stone for use in mounting casts, and locking gnathological instruments into position. Free flow is held to a minimum in thisFlowstone FS sets 50% faster than typical stone products. Early high strength allows separation from base mold in 15 minutes. Use Flowstone FS with PRIMA-ROCK has the highest compressive strength of any Whip Mix die material. Vacuum spatulation provides a smooth mix which flows readily. It's QUICKSTONE is an economical dental stone with consistent handling properties. Its smooth creamy mix makes it ideal for a variety of lab procedures.
Quantity11 kg (25 pounds)
22 kg (50 pounds)
100 Packages (100 g)		11 kg (25 pounds)
22 kg (50 pounds)		22.7 kg (50 lbs) Carton5 kg (11 pounds)
11 kg (25 pounds)
25 kg (55 pounds)
120 Packages (70 g)		11 kg (25 pounds)
22 kg (50 pounds)
Compressive Strength8,500 psi (59 MPa)7,000 psi (49 MPa)12,000 psi (83 MPa)17,000 psi (117 MPa)8,000 psi (55 MPa)
Working Time2 - 3 minutes10 - 60 seconds4 - 6 minutes6 - 8 minutes3 - 5 minutes
Set Time5 minutes1 - 3 minutes8 minutes12 minutes10 minutes
Indication For UseMounting Casts To ArticulatorsMounting Casts
Locking Gnathological Instruments		Fluid, Low Expansion Base StoneHigh Strength Die StoneVariety Of Lab Procedures
Liquid / Powder Ratio26 mL / 100 g29 mL / 100 g23 - 24 mL / 100 g20 mL / 100 g28 mL / 100 g
Setting Expansion0.08%0.15 %0.08%0.13 %0.14%
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->