Lab Gypsum Materials

Dental lab gypsum materials are used to create highly accurate model from a physical impression of a patient's teeth. The models are fabricated by pouring the gypsum material into the impression and allowing it to harden. There are a wide range of gypsums used in dentistry with different properties depending on how the models will be used. Some gypsums are ideal for use in sectioned models and dies, others are designed to be scanned for use in CAD/CAM dentistry, while other model materials are designed for use in vacuum-forming orthodontic appliances, mouth guards or other appliances. It is important to be sure your gypsum is properly set and be sure to properly label your models and dies so they stay with the correct case.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemMicrostone GypsumBitestoneFlowStone FS GypsumHard Rock GypsumQuickStone Laboratory Stone
PriceInquireInquireInquireInquireInquire
DescriptionMICROSTONE's fine particle size and dense surface make it our finest general purpose laboratory stone. It is especially suited for processing acrylic An extremely fast setting stone for use in mounting casts, and locking gnathological instruments into position. Free flow is held to a minimum in thisFlowstone FS sets 50% faster than typical stone products. Early high strength allows separation from base mold in 15 minutes. Use Flowstone FS with The material is compatible with all types of impression materials. Its high expansion makes it especially suited for polyvinyl or polyether impressionQUICKSTONE is an economical dental stone with consistent handling properties. Its smooth creamy mix makes it ideal for a variety of lab procedures.
Quantity11 kg (25 pounds)
22 kg (50 pounds)
80 Packages (140 g)		11 kg (25 pounds)
22 kg (50 pounds)		22.7 kg (50 lbs) Carton11 kg (25 pounds)
25 kg (55 pounds)
120 Packages (70 g)		11 kg (25 pounds)
22 kg (50 pounds)
Compressive Strength8,500 psi (59 MPa)7,000 psi (49 MPa)12,000 psi (83 MPa)15,000 psi (104 MPa)8,000 psi (55 MPa)
Working Time5 - 7 minutes10 - 60 seconds4 - 6 minutes6 - 8 minutes3 - 5 minutes
Set Time13 minutes1 - 3 minutes8 minutes15 minutes10 minutes
Indication For UseAcrylic DenturesMounting Casts
Locking Gnathological Instruments		Fluid, Low Expansion Base StoneCrown & BridgeVariety Of Lab Procedures
Liquid / Powder Ratio28 mL / 100 g29 mL / 100 g23 - 24 mL / 100 g21 mL / 100 g28 mL / 100 g
Setting Expansion0.12%0.15 %0.08%0.28%0.14%
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->