Lab Gypsum Materials

Dental lab gypsum materials are used to create highly accurate model from a physical impression of a patient's teeth. The models are fabricated by pouring the gypsum material into the impression and allowing it to harden. There are a wide range of gypsums used in dentistry with different properties depending on how the models will be used. Some gypsums are ideal for use in sectioned models and dies, others are designed to be scanned for use in CAD/CAM dentistry, while other model materials are designed for use in vacuum-forming orthodontic appliances, mouth guards or other appliances. It is important to be sure your gypsum is properly set and be sure to properly label your models and dies so they stay with the correct case.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemSnap-Stone GypsumBitestoneLean Rock GypsumMicrostone GypsumMounting Stone Gypsum
PriceInquireInquireInquireInquireInquire
DescriptionSNAP-STONE is an exceptionally fast setting stone with an early high compressive strength, which allows separation of the cast from the impression in An extremely fast setting stone for use in mounting casts, and locking gnathological instruments into position. Free flow is held to a minimum in thisLeanRock is formulated specifically for laboratories who want to pour small batches (about 6) and have working models ready in 15 minutes. This MICROSTONE's fine particle size and dense surface make it our finest general purpose laboratory stone. It is especially suited for processing acrylic A very hard, fast setting gypsum material formulated expressly for mounting casts to articulators. Its very low setting expansion prevents
Quantity5 kg (11 pounds)
11 kg (25 pounds)
22 kg (50 pounds)
80 Packages (140 g)		11 kg (25 pounds)
22 kg (50 pounds)		25 kg (55 pounds)11 kg (25 pounds)
22 kg (50 pounds)
80 Packages (140 g)		11 kg (25 pounds)
22 kg (50 pounds)
100 Packages (100 g)
Compressive Strength14,000 psi (97 MPa)7,000 psi (49 MPa)7,200 psi8,500 psi (59 MPa)8,500 psi (59 MPa)
Working Time60 - 90 seconds10 - 60 seconds4 - 5 minutes5 - 7 minutes2 - 3 minutes
Set Time2 minutes1 - 3 minutes5 - 7 minutes13 minutes5 minutes
Indication For UseBleaching Trays
Mouth Guards
Vacuum Formed Splints
Custom Tray
Orthodontic Appliances
Temporaries
Denture Repairs
Study Casts
Articulator Cast Mounting
CAD-CAM Restorations		Mounting Casts
Locking Gnathological Instruments		Small Batch (6 Models) PoursAcrylic DenturesMounting Casts To Articulators
Liquid / Powder Ratio23 mL / 100 g29 mL / 100 g20 mL / 100 g28 mL / 100 g26 mL / 100 g
Setting Expansion0.15%0.15 %0.08%0.12%0.08%
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->