The CAM portion of a dental CAD/CAM workflow, chairside dental mills use a rapidly spinning bur to grind away material and carve a dental restoration from a solid block of ceramic, resin or other material. Guided by the dental CAD/CAM software, these mills turn 3D designs into restorations that can be placed in a patient’s mouth. Dental mills can be a part of a complete CAD/CAM system or sold on their own to be connected with open architecture digital impression systems via dental CAD/CAM software. When selecting a chairside mill it is important to make sure it is compatible with your digital impression scanner and CAD/CAM software and that it is capable of milling the materials you prefer to use in your practice.
Select up to 5 products from below to compare or request more information.
- Milling Speed: Up to 60,000 RPM
- Milling Time: 15 minutes
- Bur Length: Not Available
- Fabrication Material: VITABLOCS Mark II
Not Available
- Milling Speed: 100,000 RPM
- Milling Time: 16 to 18 minutes per crown
- Bur Length: Not Available
- Fabrication Material: Not Available
- Milling Speed: 100,000 RPM
- Milling Time: 10 minutes
- Bur Length: Multiple
- Fabrication Material: Ceramics, Hybrid Ceramics, Zirconia and Resin-Based Materials
Robots and Design (MAXX Series)
- Milling Speed: Not Available
- Milling Time: 8 to 15 minutes
- Bur Length: Not Available
- Fabrication Material: Not Available
- Milling Speed: Up to 100,000 rpm
- Milling Time: Less than an hour.
- Bur Length: Not Available
- Fabrication Material: Hybrid resin, ceramic and zirconia. Adapts to new materials.
Not Available
- Milling Speed: Not Available
- Milling Time: Not Available
- Bur Length: Not Available
- Fabrication Material: Not Available
Not Available
- Milling Speed: Not Available
- Milling Time: Not Available
- Bur Length: Not Available
- Fabrication Material: Zirconia, IPS e.max, glass ceramics and temporary materials.
Not Available
- Milling Speed: Not Available
- Milling Time: Using the mill’s Super Fast mode, zirconia crowns can be milled in about five minutes. The improved grinding mode for glass ceramics also grinds the material faster than its predecessor.
- Bur Length: Not Available
Not Available
- Milling Speed: Not Available
- Milling Time: Not Available
- Bur Length: Not Available
- Fabrication Material: Feldspar ceramic, Glass ceramic, Lithium disilicate ceramic, Full contour zirconia, Hybrid ceramic, Polymer blocks
Not Available
- Milling Speed: Not Available
- Milling Time: Not Available
- Bur Length: Not Available
- Fabrication Material: Feldspar ceramic, Glass ceramic, Lithium disilicate ceramic, Full contour zirconia, Hybrid ceramic, Polymer blocks
Not Available
- Milling Speed: Not Available
- Milling Time: Not Available
- Bur Length: Not Available
- Fabrication Material: Feldspar ceramic, Glass ceramic, Lithium disilicate ceramic, Full contour zirconia, Hybrid ceramic, Polymer blocks, Sintered Metal
Not Available
- Milling Speed: 150,000 RPM
- Milling Time: 20 minutes
- Bur Length: Not Available
- Fabrication Material: Obsidian™ Lithium Silicate Ceramic
BruxZir® Solid Zirconia
Not Available
Select up to 5 products from above to compare or request more information.
Tags:
Please Login or Register to Create Tags
Articles
- Dentsply Sirona Announces Updates to Connect and CEREC Software
- Enhanced Dental Product: iTero Intraoral Scanner from Align Technology Connects to TS150 Mill from IOS Technologies
- 3Shape Integrates CAD/CAM System With Planmeca Scanners and Mills
- Planmeca Forms New Distribution Partnerships for its CAD/CAM Portfolio
- Enhanced Dental Products: Planmeca PlanMill 30 S, Planmeca Romexis 5.2, Planmeca PlanCAD 6.0.5 and Planmeca Emerald Slim Line Scanning Tip
- Ivoclar Vivadent’s Tetric CAD and IPS e.max ZirCAD Now Can Be Used with Planmeca’s PlanMill
- New Dental Product: CEREC MTL Zirconia From Dentsply Sirona
- The Top 10 New Dental Products of 2014
- New Dental Product: BruxZir NOW Zirconia CAD/CAM Blocks from Glidewell Laboratories
- Carestream Dental’s CS 3000 Mill Approved for Use with 3M ESPE Lava Ultimate
- New Dental Product: KATANA Zirconia ONE Blocks From Kuraray
- Dentsply Sirona Reintroduces the CEREC MC Milling Unit to the U.S. Market
- Closed Vs. Open CAD/CAM – Selecting a Winner
- Dentalcompare’s Top 10 Posts of 2022
- Planmeca Launches PlanMill 30 S in the U.S.
- New Dental Product: PlanMill® 35 Milling Unit From Planmeca
- Enhanced Dental Product: CS 3000 Dental Mill from Carestream Dental Certified for Milling VITA ENAMIC Material
- BIOLASE Reaches Milestone, Has Sold 25,000 Dental Lasers
- Dentsply Sirona and NSU College of Dental Medicine Partner to Open Advanced Training Facility
- New Dental Product: Planmeca PlanMill 50 S Milling Unit
- New Dental Product: iTero Element Intraoral Scanner from Align Technology
- Why 3D Printing is a Perfect Fit for Dentistry
- New Dental Product: CS 3100 Milling System from Carestream Dental
- New Dental Product: CEREC Primemill Grinding and Milling Machine from Dentsply Sirona
- New Dental Products: PrograScan One and PrograScan One+ Intraoral Scanners From Ivoclar Vivadent
- New Dental Product: PlanMill 30 S Milling Unit from Planmeca
- Medit Introducing Medit ClinicCAD App, a Scan-to-Design Prosthetics Solution Driven by AI
- New Dental Product: MyCrown CAD/CAM System from FONA Dental
- New Dental Product: DWOS Chairside CAD Software from Dental Wings
- Henry Schein and Dentsply Sirona Announce Fall Dates for Exceed With CEREC
- Henry Schein to Offer BruxZir NOW milling blocks from Glidewell Laboratories
- Straumann Enters into Broad Distribution Agreements with 3Shape and Rapid Shape
- Enhanced Dental Products: iTero Element Intraoral Scanners from Align Technology
- Enhanced Dental Product: TRIOS 3 Wireless from 3Shape
- Checking in on the Latest Industry Changing Dental Technology
- New Dental Products: Implants, Prosthetic Solutions, Glass Ceramics, Edentulous Solutions, Intraoral Scanners, 3D Printers, Milling Units, Educational Solutions and Digital Workflows from Straumann Group
- How the Newest Dental Product Innovations Will Impact the Industry