New Dental Products 

The Bravo fractionated vacuum chamber autoclave incorporates both pre-vac (to remove air) and post-vac (to help drying) cycles to ensure optimal steam penetration for any load. Bravo is true to the Statim reputation for speed, providing rapid cycles for unwrapped instruments.

Bravo benefits include:

Fast cycle times
Fractionated vacuum system
Closed door drying with Dri-TecV technology
Single use Pull’n Push water system
Easy to use – single button operation ,br> Conforms to international and national standards (ie. CDC, ST, ISO, EN, BS)
Integrated printer option
Patented door locking mechanism and steam generation system
17 or 21L chamber capacity
120V or 220V options

Added 11/16/2009

The Midmark M3 UltraFast® Automatic Sterilizer is an autoclave that sterilizes unwrapped instruments and handpieces in just 6 minutes and pouched instruments in just over 10, with the touch of a button. The M3 features One-step loading, Push-button cycle selection, automatic-opening door, water level monitoring, 25 minute drying, convenient top-fill access to water reservoir, and a front reservoir drain with on-board drain tube storage. The condensate tank has a quick release lid, convenient carrying handle and water level sensor. The M3 was designed for use as a stand-alone sterilizer or as a complementary sterilizer to the Midmark M9 and M11. All three are similar in ease of use and function - the M9 and M11 provide maximum sterilizing capacity, while the M3 provides the speed required when instruments are needed quickly. The M3 is equipped with a fully automatic door that closes at the start of each cycle and opens at the end of each cycle to dry an instrument load in as little as 25 minutes. This feature increases efficiency and eliminates the need to monitor the sterilization cycle, freeing the clinician to perform other tasks.

The Midmark M3 provides three pre-programmed cycles. In addition, the ergonomically developed, removable M3 door tray is easy to use and maneuver. The door tray slides into the sterilization chamber effortlessly for easy loading, while its convenient open-top design assures simple, fast and consistent instrument processing, saving time for the clinician. The M3 fits on a counter or in a steri-center. Several handpieces and instruments can be accommodated in one load, and the tray is large enough to hold a standard Hu-Friedy® Signa-Stat cassette.

Added 11/15/2009

The Satelec Mini LED curing light can be integrated in all KaVo treatment units. The light provides excpetional brightness--1,100mW/cm˛--without heat. The emission spectrum is within the optimal range for most composites (camphoroquinone 470nm, PPD and PAB 430nm).

The light cures 2mm thick composites in 6 and 12 seconds.

Features include:

No battery or charging-related problems
Easy to use
3-year guarantee (for handpiece)
Lightweight handpiece(160g)
3 curing programs

Top quality metal sleeve

Sterilizable glass fibre-optic bundle, rotatable through 360°

No fan

Added 11/13/2009

Offering 8 watts of power and 1064 wavelength (comparable to Nd-YAG lasers), the InGaAsP 1064 dental laser provides pulse duration control witht a click of the dial--from 1 ms to 50 ms as well as continuous. Presets provide one-touch complete settings.

Weighing three pounds, the compact countertop InGaAsP 1064 operates on battery up to three weeks without charging or can be connected to DC outlet. It is engineered for rapid procedures and reduced cost per patient.

Added 11/13/2009

Curve Hero is a full-featured practice management and clinical software package that is Web-based, which eliminates the need for back-ups, servers, and up-front costs for software. It offers Dental Charting, Perio Charting, Clinical Notes, Patient Education, Treatment Planning, Billing Software, Reporting, Scheduling, Insurance Management, Training, Communication, Data Backup, Imaging , and more. With web-based software, the practice can access patient data from anywhere at any time, data backup and security is ensured, and upgrades become available automatically.

Added 10/23/2009

The Anterior Contacts Mirror simplifies photographing overjets and anterior contacts. The inset curved end follows the curve of the arch for comfortable placement. The mirror can also be used for standard occlusal arch views.

Added 10/21/2009

PhotoMed's new R2 Dual Point Flash Bracket is designed to provide maximum flexibility in flash positioning. Bring the flash heads in towards the lens for posterior views and mirror shots. Spread the flash heads out to the side for anterior aesthetic images and natural looking smile shots. Each flash head can be repositioned "on the fly" with one hand.

The R2 Bracket is available in Nikon or Canon configurations and is compatible with Nikon's R1 and R1C1 macro flashes and Canon's MT-24EX macro flash.

Added 10/21/2009

The PhotoMed G11 Digital Dental Camera is specifically designed to capture all standard clinical views with "frame and focus" simplicity. The built-in color monitor enables the subject to be precisely framedjust focus and shoot.

Proper exposure and balanced even lighting are assured. By using the camera's built-in flash, the amount of light necessary for a proper exposure is guaranteed and PhotoMed's custom closeup lighting attachment redirects the light from the camera's flash to create a balanced, even lighting across the field.

Added 10/21/2009

CAESY DVD 9 is the latest version of CAESY DVD format patient education software. It enables dental professionals to efficiently and consistently explain diagnoses, procedures, alternatives and post-op instructions in operatories and consult rooms.

The new version includes seven new presentations, as well as 29 updated presentations to enhance patient education throughout the practice.

The DVD features a completely updated esthetics section, as well as all-new modules on Digital Panoramic X-ray, the Caries ID detection wand, Medications, Esthetic Crown Lengthening, Free Gingival Graft, Sinus Lift, and Subepithelial Gingival Graft. CAESY DVD 9 also features updated CAD/CAM presentations to include the new CEREC AC powered by Bluecam. New 3-D animations and live-action video also help keep the presentations fresh.

Added 10/06/2009

The new 5.25 x 6.5 size Sure-Check Sterilization Pouch is designed for bur blocks and impression trays.  Sure-Check sterilization pouches have internal and external "multi-parameter" indicators that clearly show if the three parameters for sterilization have been met during processing - required temperature for the proper amount of time and contact with saturated steam under pressure (as recommended by CDC infection control guidelines and ISO sterilization standards). 

Sure-Check pouches provides a reliable indication that the required conditions for sterilization have been met as compared to using internal single parameter pouches.  The use of Sure-Check pouches saves money and time because there is no need to purchase separate indicator strips and insert them into the pouches. 

Added 09/25/2009

Stainless steel bur blocks 9931 and 9933L3 (shown in photo) are designed for simple cleaning, disinfection, sterilization, and storage of dental instruments. Any KOMET friction grip or contra-angle instruments stored in these bur blocks can be cleaned and disinfected either in an instrument and/or ultrasonic bath (in which case the block must be closed), or in the thermo disinfector (in which case the block must be open). The sterilization takes place in the autoclave. The bur blocks' blue silicone plugs hold the instruments tightly in place; the instruments cannot fall out. In refill packs of 8 pieces, the silicone plugs are also available in yellow and red. Block 9931 holds up to 9 instruments and block 9933L3 holds up to 12 instruments.

Added 09/24/2009

TwinPower Turbine now features ceramic ball bearings. Forty percent lighter and three times harder than conventional bearings, they offer an extended turbine life, reduced operation noise, and less vibration. For maximum torque control, TwinPower’s double-impeller design delivers up to 22 watts of power. Its compact head has a height of just 13.2mm. A mini head design is also available which offers high cutting efficiency. Other features include zero suck back in the air line, rapid braking within 2 seconds, glass rod optics, and direct connection to popular coupling systems.

Note: TwinPower Turbine handpieces sold in Canada feature metal ball bearings.

Added 09/22/2009

The Identafi™ 3000 ultra is an upgraded version of the original small, cordless, handheld oral cancer screening device. The ultra features enhancements such as nickel-plating, double the auto-fluorescent power, and both hardware and software upgrades. The device uses a three-wavelength optical illumination and visualization system to allow dental professionals to catch early cancers not visible to the naked eye.

The Identafi 3000 ultra features the same proprietary, patented multi-spectral light wavelengths as the popular Identafi 3000. A study published in the May 2009 issue of Cancer Prevention Research found that the excitation wavelength delivered by the Identafi 3000 (and Identafi 3000 ultra) is optimal for discriminating between neoplastic and non-neoplastic lesions. New diodes deliver twice the auto-fluorescent power to further improve visualization.

The Identafi 3000 ultra uses three different wavelengths of light to excite oral tissue in distinct and unique ways. Biochemical changes can be observed with fluorescence, while morphological changes can be observed with reflectance. This multiple wavelength technology identifies abnormal tissue with more accuracy than a single color wavelength.

Nickel plating has been added to the Identafi 3000 ultra to boost electrical conductivity, improve durability, and provide a smoother feel. Trimira has also made hardware and software upgrades to maximize the device’s performance.

Added 09/16/2009

The Isolation Block device features the combination of a bite block, tongue shield, and lip retractor that suctions continuously. It is designed to provide isolation and a dry working field in both arches. The disposable device is made of medical grade silicone for patient comfort. It attaches easily to low volume suction. The Isolation Block comes in three color-coded sizes to fit all patients.

Added 09/16/2009

Compatible for integration with existing delivery units, the Digital Doc iCon intraoral video camera has all components integrated in the handpiece. That includes a USB 2.0 connector that plugs into the computer for fast image downloading and easy viewing with compatible imaging software. The USB camera is designed to hang next to the high speed handpiece. It has dual capture buttons for right or left hand use and a focus capability that allows adjustment from macro to full smile with a touch of a finger. Advanced optics and digital technology deliver clear, detailed images. Eight LEDs serve as the light source

Added 09/15/2009

The gumEase cryoanesthetic single-use dental mouthpiece acheives a regional pain block by applying extreme cold to maxillofacial nerves. Suitable for procedure and post-procedure pain control, the non-invasive drug-free device is made of a proprietary noDOP PVC biocompatible compound that adapts comfortably to the patient's mouth; it is prepared by storing in a freezer. As soon as the gumEase is placed in the sulci, numbing takes effect in 8 minutes. An assitant can place the gumEase without the dentist being present. It anesthetizes all four quadrants. Anesthesia is achieved with three consecutive devices that were previously frozen to 22 degrees F.

Added 09/15/2009

The FlashMax LED curing light emits light an an intensity greater than 4,000 mW/cm2 for exceptionally fast curing. While the power is high, the shorter treatment time results in lower energy applied to the tooth, thus reducing the risk of heating the pulp.

Additionally, the light's broad wavelength spectrum (425-500 nm) makes is suitable for use with all composites. The ergonomic FlashMax is lightweight and designed for easy access to upper and lower poster regions of the oral cavity. The cordless FlashMax is supplied with two autoclavable covers as well as disposable tips for a variety of clinical applications.

Added 09/15/2009

The Traxodent Hemodent Paste Retraction System is designed to provide quick effective retraction in about 2 minutes as well as superior hemostasis; it stops bleeding and crevicular seepage while retraction occurs, easily absorbing excess crevicular fluid.

Traxodent enhances patient comfort. It avoids tearing gingiva and creates less pressure on sensitive tissue.

Traxodent is supplied in a convenient delivery system. The ergonomic disposable syringe and bendable syringe tip provide excellent reach, and eliminate the need for guns or cartridges. Each ready-to-use syringe is packaged in resealable foil pouches for maximum freshness.

The Traxodent Value Pack contains 25 syringes and 50 tips and the Traxodent Starter Pack contains 7 syringes and 15 tips. Applicator tips are available separately in packs of 50.

Added 09/15/2009

Available for iPhone and BlackBerry users, the PEARL software application is an add-on module for PracticeWorks management/clinical software enabling real-time information to be accessed remotely from a mobile device. Dentists can view and act upon real-time information related to patient and treatment detials, scheduling, financials, call-backs, prescriptions and pharmacies, referring providers, and more.

Among the tasks that can be performed remotely using PEARL:

Handle emergencies by accessing patient records after hours
Manage after-hours calls to patients, referring doctors, and staff
Access scheduling inforamtion to add patients and make changes
View graphs and data about practice finances

PEARL software delivers secure two-way data flow and is easy to use, requiring little to no learning curve. No patient data is stored on the mobile device.

PEARL is available for Kodak PracticeWorks, SoftDent, OrthoTrac, and WinOMS CS practice management systems.

Added 09/15/2009

The everLight LED operatory light provides color-corrected lighting, precise light pattern, and energy efficient features. Offering energy-efficient features not possible using traditional halogen lighting, the everLight encompasses a long life of 30,000-plus hours, 10 times longer than halogen, reducing the need for regular replacement of lightbulbs. Additionally, the everLight uses less than 35 watts of energy; 70% less than halogen-based systems.

No reflector or fan is required for the ultra-quiet everLight, because it is 100% true direct LED lighting and remains at a consistent, cool temperature.

everLight is equipped with nine temperature/intensity settings and the LED technology provides natural daylight illumination and a precise light pattern, which results in clear oral cavity visibility and exact color matching. The everLight’s LED composite setting will not cause pre-maturing on composite materials.

The everLight is ergonomically equipped with a standard third-axis rotation, allowing limitless positioning for optimal illumination. The everLight is easily installed in six mounting configurations.

The everLight has an extended life expectancy and comes with a best-in-class 3-year warranty combined with a 6-year warranty on the unit’s engine components (switches, LED driver, and Lens).

Added 09/15/2009

Designed to hold and place crowns, veneers, inlays and onlays, Griptab is a small handle that is adhered to the restoration; the light-cured, flexible adhesive is strong and moisture-resistant, yet easily and cleanly detaches from the restoration at the end of the procedure. By having a handle on the restoration, the dentist has a reliable grip for total control over the process.

Griptab ensures precise control during try-ins, and during hydrofluoric acid-etching, silanation and even ultrasonic cleaning. The restoration can be picked up and released multiple times in a passive, controlled way with no risk of dropping it on the floor. Griptab is not just for dentists but also for assistants and lab technicians, overcoming the awkwardness and risk associated with handling indirect restorations.

Griptab provides:
• An adhesive resistant to Silane and moisture
• Easy pick-up
• Secure grip
• Accurate, sure placement
• Passive and controlled release
• The ability to pick up and put down a restoration multiple times
• Peace of mind when handling restorations

Griptab comes in three sizes to handle any type of bonded or cement restoration:
• Small – for inlays and veneers
• Medium – for inlays, onlays, veneers and crowns
• Large – for crowns

Added 09/07/2009

The XIOSPlus intraoral sensor system provides flexibility of capturing quality digital X-rays by using either an Ethernet or USB module. With Sirona’s intuitive SIDEXIS XG software, practitioners can view digital X-rays directly on any computer monitor or the office network without license fees.

The Ethernet (wall module) is easy to integrate into any network. Using its large-sized multicolor display, the user can confirm patient information prior to taking the image. Various LCD colors indicate the current operational status. The wall module also allows the user to plug in two sensors simultaneously, so that the right sensor is always close at hand. The built-in sensor holders also reduce clutter and minimize the risk of damage to the sensors.

The USB module can be connected to any PC as a true “plug-and-play” component, allowing sensors to be used anywhere they are needed. The USB module also features LED indicators of system status.

Available in two sizes, XIOSPlus sensors are designed to be robust and ergonomic. The thin cable connection, beveled edges and anatomically rounded corners allow quick, easy positioning in the patient’s mouth. The Active Pixel (APS) CMOS sensors (pixel size: 15 µm) achieve offer high image quality and speed. The automatic pre-processing options in SIDEXIS allow the clinician to select preferences for a broad spectrum of diagnostic applications.

Added 08/31/2009

The HELIODENTPLUS is a compact, ultra-light, intraoral X-ray generator for film-based and digital imaging. The user can switch from the film-based to the digital mode with the touch of a button. The HELIODENTPLUS incorporates a robust arm assembly to fit any operatory; various arm lengths provide easy, stable positioning for taking any intraoral image. The various controller options also allow for flexible installation requirements. The vertical mount can be incorporated in pass-through and central cabinet installations. Furthermore, with a built in power regulator, the HELIODENTPLUS eliminates the risk of being affected by power fluctuation.

Exposure times are selected by using easy-to-understand tooth icons. Two patient size icons select exposure settings. The user also has the option of customizing the preprogrammed exposure times. Two power settings are available: 60 kV for high-contrast images; and 70 kV for highly detailed images and a minimum radiation dose.

In connection with established Sirona digital sensors, HELIODENTPLUS supplies first-class digital images, and the SIDEXIS XG software displays these images in real time.

Added 08/26/2009

The Xpod Wireless X-Ray Sensor with Handheld Touchscreen is a pocketsize device that provides instant diagnostic quality radiographic images on a handheld device. The high resolution images can be reviewed and zoomed on a wide yet pocketsize touchscreen display without external power supply, wires, software or a PC. After an overnight charge, the X-pod provides a whole day’s autonomy from the lithium-polymer battery. The two sizes of X-pod intraoral sensors feature a thin outer casing and with chamfered edges and rounded corners. Sealed and liquid proof, the sensor has a hardened outer casing and a reinforced cable attachment. X-pod incorporates a hot-plug for small and large MyRay sensors, a fast USB port for convenient data sharing and Bluetooth interference-free wireless connectivity.

The system uses Bluetooth 2 wireless communication technology for fast image transfer to your PC only, respecting patient privacy. The MyRay patented interference-free implementation makes it even more reliable and safe. Once on the PC, any imaging software can be used to mount images in full-mouth templates.

Added 08/21/2009

GC MI Paste now is available in Mint only 10-Tube Packs. Each box contains ten (40 g) tubes Mint flavor only MI Paste.

MI Paste restores minerals (calcium and phosphate) to help patients stimulate saliva production. It contains RECALDENT™ (CPP-ACP), a milk-derived protein-mineral complex that helps remineralize teeth. MI Paste is a topical crčme that can be applied to teeth safely and effectively several times daily. MI Paste has less than 0.1% lactose and is safe for lactose intolerant patients.

Saliva will enhance the effectiveness of CPP-ACP and the flavor will help stimulate saliva flow. The longer CPP-ACP and saliva are maintained in the mouth, the more effective the result. A topical crčme containing bio-available calcium and phosphate will:

1. Provide extra protection for teeth.
2. Help neutralize acid challenges from acidogenic bacteria in plaque.
3. Help neutralize acid challenges from other internal and external acid sources.

Added 08/21/2009

The Track Light Monitor from Midmark provides optimal dental lighting with exceptional monitor positioning, providing an enhanced patient experience while improving efficiency and case acceptance. The system offers a 17-inch dental-grade monitor (viewable overhead or chairside), a color-correct reduced-shadow light, independent movement of light and monitor, height and side-to-side adjustability, easy tilt and swivel, seamless integration of PC, TV & DVD. Other features include inputs for VGA, 3.5 mm PC audio, coaxial cable, HDMI, S-Video and RCA composite along with robust, double shielded cables with over molded connectors.

Added 08/17/2009

BodyGuard LX seating line is a luxury edition of Orascoptic’s line of BodyGuard seating systems. The BodyGuard LX line includes all of the adjustable features of the original BodyGuard product along with fabric, padding, and color upgrades for additional comfort and performance. The LX line features stitched Ultra-Leather fabric and extra-plush Visco-Elastic cushioning for comfort. LX chairs are available in a single color, or in custom dual-color combinations. There are over 40 colors to choose from.

The new BodyGuard LX was designed to position the clinician correctly, to relieve muscle stress and discomfort. The result is a longer, healthier career. The BodyGuard line includes an operator’s chair, an assistant’s chair, and an armless Stool. Each system employs adjustable components to customize the position of your arms, legs, seat, and back.

Added 08/14/2009

The DEXIS Platinum intra-oral sensor features a direct USB connection, new image capture technology, and enhanced ergonomic design. Maintaining both the comfort and single-sensor concept of its DEXIS PerfectSize sensor, DEXIS Platinum now combines direct USB connectivity, TrueComfort design, and PureImage technology for a new experience in digital imaging. The sensor is durable and portable for use in multiple operatories and fieldwork and its integrated USB functionality eliminates the need for adapters, controllers, or docking stations.

For patient comfort and ease-of-use, DEXIS has enhanced the ergonomic sensor housing--the TrueComfort design of the Platinum sensor’s refined beveled corners and its rounded casing ensure that there are no sharp edges against the patient’s tissues. The new smaller, angled dome on the back of the sensor incorporates the patented WiseAngle™ cable exit that increases comfort and efficiency for precise placement.

The Platinum sensor also incorporates PureImage technology — a combination of highly sophisticated software and premium-quality hardware components that provides 16,000 shades of gray generated by a 14-bit analog-to-digital converter. The sensor’s high resolution provides more than 20 visible line pairs offering remarkable image clarity and virtually no visual noise. Additionally, an exclusive design maximizes active area at the pixel level, bringing out the smallest details. With a 2.2-megapixel size, images remain crisp when enlarged.

The DEXIS Platinum sensor has an enhanced quantum efficiency which makes it very receptive and efficient when capturing X-ray images across a dynamic range of radiation settings. This delivers the ability to reduce the number of retakes due to under- and over-exposure, as well as ultimately lower radiation dosages. The sensor produces optimal, consistent images whether using with the latest intra-oral X-ray unit or an older model.

Added 08/12/2009

GEM light-weight Class II flip-up loupes are designed to offer quality resolution, clarity, and visual acuity at an economically affordable price. GEM loupes are exceptionally lightweight for all-day comfort. The GEM is ideal for first time loupe wearers, students and dental assistants who want all the benefits of magnification at an affordable price.

The GEM features Orascoptic’s popular titanium Victory frame, and is available in slate or wine color. Each GEM is backed by a limited lifetime warranty and comes with side shields, a head strap, protective lens caps, and a sleek black storage case.

Through December 31, 2009, GEM loupes are available for free with the purchase one of Orascoptic’s HiRes or HiRes Plus loupes. This offer cannot be combined with any other Orascoptic promotion.

Added 08/10/2009

Expasyl gingival retraction paste now comes in strawberry flavor. This new version of Expasyl offers the same tissue management qualities—excellent hemostasis and fast, atraumatic gingival retraction. A new intro kit includes the lightweight ergonomic gun, new curved tips, and 60% more material than the original.

Expasyl simultaneously stops bleeding and expands the sulcus to enable impression material to accurately capture crisp margins for great-fitting restorations. Expasyl significantly cuts retraction time, is less traumatic to surrounding tissue, and the composition of the material prevents bleeding and crevicular fluid from obscuring the detail of an impression.

It contains a 15% concentration of aluminum chloride which constricts blood vessels and shrinks epithelial tissue, preventing residual bleeding and separating soft tissue from the dentition. This results in an open, dry sulcus. These same clinical benefits are also useful in final cementation of indirect restorations or any restorative procedure that occurs near or below the gumline.

Added 08/07/2009

Bifix SE self-adhesive resin cement incorporates the self-bond nano technology of Futurabond DC with the cement engineering of Bifix QM in a new 4:1 mixing ratio. The 4:1 ratio allows the use of an initiator system to engineer a catalyst that is very stable, even without refrigeration. The clinical benefits are high bond strength, especially on zirconia-based (20MPa) and ceramic based (35 MPa) restorations and low water solubility.

Bifix SE’s easy gel phase excess removal, low film thickness, fewer working steps and its moisture tolerance, makes it easy to work with. Bifix SE is compatible with common substrates like ceramics (incl. zirconia), PFMs and metal and CAD/CAM materials.

All packs include extra long and thin Endo tips for the direct application into the root canal making post cementation very easy. Bifix SE is available in three shades--translucent, universal and white-opaque.

Added 08/07/2009

OS (oscillating segment) Discs are designed for safe, efficient interproximal enamel reduction. OS Discs are more effective than manual enamel reduction with lower risk of injuring the soft tissue. OS Discs allow enough vision for the user without the need of a disc guard and provide optimal chip removal.

OS Discs are 60-degree segmented with a radius of only 1.4 cm and a pivoting angle of 30 degrees, allowing access into tight spaces with excellent user control. OS Discs allow the user to correct minor tooth-size discrepancies, eliminate crowding, allowing tooth movement, broaden interproximal contact areas, and improve orthodontic outcomes such as Invisalign® (Align Technology, Inc) procedures. There are 15 different OS Discs--nine with fine-grit diamonds and six with medium-grit diamonds. Out of the 15 OS Discs, eight are one-sided and seven are two-sided, and come in various thicknesses (0.13 mm to 0.45 mm). OS Discs also allow the user to eliminate crowding and reduce enamel for the proper placement of veneers.

OS Discs are designed to be used in KOMET's oscillating electric handpiece OS30. When using the micro-motor at full capacity, an effective performance of 5,000 oscillations per minute is reached. It is also possible to use the OS30 in an air motor; and at the motor's maximum capacity, an effective performance of 2,500 oscillations per minutes can be reached.

Added 08/06/2009

Designed to be dual use, DEFEND Vented Oral Evacuation Tips are vented at one end and non-vented at the other end. The convenient, one-time-use, disposable tips fit all standard evacuator hose ends. DEFEND Vented Oral Evacuation Tips have smooth edges for maximum patient comfort. The straight handle provides increased control. Evacuation tips are non-sterile, 1/8" in diameter, and are available in standard and short (3") lengths.

Mydent recently re-launched its rewards program and for a limited time is offering a 1,000 point bonus and double points on purchases. The rewards program allows customers to redeem points earned from product purchases for gifts such as bikes, grills, jewelry, electronics, and much more.

Added 08/05/2009

Tru-Pan for iCAT is software that yields precise “true” volumetric panoramic views from 3-D scans. Developed to meet the needs of dental professionals who require quick and easy pan creation from existing 3-D scans, Tru-Pan delivers anatomically accurate and precise panoramic images with optimal clarity and detail plus time savings over traditional arch detection methods found in today’s 3-D imaging programs.

Tru-Pan’s advanced reconstruction of unique anatomic landmarks automatically creates a custom, optimized focal trough specific to each patient. This focal trough detection reveals a new level of detail that delivers consistently crisp and clear views of root tips and crowns, including the incisor regions, and sinuses — all within one panoramic image.

Tru-Pan’s panoramic images are created with just one click of the mouse. The automatic custom focal arch detection works in conjunction with the patient’s 3-D data to quickly and efficiently extrapolate “true” and precise panoramic views. These consistent and optimal results save minutes of valuable clinical time over manual and semi-automatic arch setting techniques.

Available as an optional feature in the i-CATVision™ software, the easy, one-click function triggers automatic reconstruction with no additional training for clinicians or team members.

Added 08/04/2009

The bluephase 20i LED curing light offers an exceptionally high level of intensity (2,000 mW/cm2) for more efficient curing of all materials and all indications – particularly extensive restorations. The bluephase 20i features “polywave” LED technology producing a halogen-like broadband spectrum (380 to 515 nm) encompassing all current photoinitiators and materials. The battery-operated bluephase 20i is equipped with four easy-to-use programs, including a new “Turbo” program offering a quick 5-second cure for all shades of composite, while preserving the health of the pulp and gingival tissue.

Based on the ergonomic design of the original bluephase curing lights, the bluephase 20i features the “Click & Cure” back-up power supply eliminating delays do to depleted batteries. An internal and virtually noiseless fan provides continuous cooling preventing interruption during even the most extensive restorative procedures (e.g. multiple unit smile design cases.) Reliable and constant light intensity with shorter curing times and consistent performance make the bluephase 20i suitable for any indication. It carries a 3-year warranty.

Added 07/30/2009

Designed for prefilled 5:1 foil bags, the Plug & Press Dispenser system is a high performance automix dispenser for bulk packaged impression materials. The Plug & Press Dispenser system can mix and dispense a wide range of viscosities. This provides the user with a homogenous, void-free impression material. With a reliable discharge force, the Plug & Press Dispenser system is clean, reliable, fast and easy to use, and offers material cost saving compared to using 50-mL cartridges. The Plug & Press® Dispenser system is compatible for most foil bags, and directly filled maxi-cartridge materials that have a 5:1 mixing ratio.

Added 07/20/2009

Developed to treat incipient caries, Icon is a caries infiltrant that incorporates micro-invasive technology to fill, reinforce, and stabilize demineralized enamel without drilling or sacrificing healthy tooth structure.

Bridging the gap between prevention (fluoride therapy) and caries restoration, Icon can be used to treat smooth surface and proximal carious lesions up to the first third of dentin (D-1). In a single patient visit, Icon can arrest the progression of early enamel lesions and remove white spot lesions.

Icon offers a simple alternative to the “wait and see” approach, enabling immediate treatment without unnecessary loss of healthy tooth structure. Icon prevents lesion progression and increases life expectancy for the tooth. Icon also provides a highly esthetic alternative to microabrasion and other restorative treatments for cariogenic white spot lesions; white spot lesions infiltrated by Icon take on the appearance of the surrounding healthy enamel.

Use of Icon is described as simple and user-friendly: After isolating the tooth with rubber dam and placing wedges to separate the teeth, the tooth surface is prepared with a 15% HCL gel to open the pore system of the lesion body. Next, the surface is rinsed, dried with ethanol, and further dried with air. The Icon Infiltrant resin, which has a high penetration coefficient, is applied onto the lesion, excess material is removed, and the material is light cured. The manufacturer recommends applying a second layer of the infiltrant, followed by additional light curing.

Icon will be available in the US by September 2009 in Proximal and Smooth Surface kits. The Icon kits provide everything necessary for treatment except the rubber dam, including specially designed dental wedges, patented perforated applicator tips for the materials, individual syringes filled with Icon-Etch, Icon-Dry (ethanol), Icon-Infiltrant, and both written and diagrammatic instructions. All syringes come in a special screw-type applicator to ensure the materials are gently and slowly extruded onto the tooth.

Icon Proximal is available in a Mini-kit with two treatment units, or a package of seven units. Each proximal treatment unit contains enough material for two proximal lesions. The Icon Smooth Surface Mini-kit includes two treatment units and is also available in packages of seven units, enough material for two or three smooth surface lesions per unit.

Added 07/07/2009

Sylc is formulated to clean, remineralize, and desensitize in a one-step high-speed prophy procedure using existing air polishing instrumentation. Sylc contains calcium sodium phosphosilicate, bioactive materials that form hydroxycarbonate apatite crystals (HCA) when combined with saliva or water. The crystals become entrapped into the collagen of dentin and biologically bond into the mineral surface to promote regeneration of dentin and damaged tooth surfaces. Sylc provides relief from hypersensitivity without unsightly discoloration or unpleasant taste or feel.

Applications include reducing hypersensitivity, heavy extrinsic stain removal, prophy treatments, adjunct for bleaching procedures, efficient cleaning around orthodontia, treating tooth erosion and abrasion, and as an oral care booster.

Sylc's physical structure minimizes the risk of soft tissue irritation, messy aerosol and instrument clogging.

Added 06/25/2009

The Nikon D5000 digital SLR camera features an articulating LCD screen that can be positioned at a comfortable angle when using it as a viewfinder and can be protected from from scratches when not in use.

The D5000 also features "date and time" imprinting; each image includes the date and time printed in the lower right corner of the image.

PhotoMed offers the Nikon D5000 as a complete clinical camera system with a choice of of Nikon or Sigma macro lenses and macro flashes.

Added 06/15/2009

The RINN XCP-ORA universal ring and arm positioning system is a three-in-one positioner suitable for correctly aligning RINN XCP Film and Sensor bite blocks. The RINN XCP-ORA design allows dentists to achieve anterior, posterior and bitewing x-ray positioning with only one ring & arm. This reduces the number of positioning pieces in the dental office, minimizes autoclave loading due to a reduced number of positioning devices and simplifies the radiographic alignment procedure.

RINN XCP-ORA One Ring & Arm Positioning System features :

• Patented red, yellow and blue color coding for ease of use
• Light weight construction for patient comfort
• Only two components needed for all anterior, posterior, and bitewing positioning
• Rugged, durable autoclavable construction for low cost per-use
• Compact design is easily stored in drawer
• Raised alignment guides for US and European sized collimators

RINN XCP-ORA One Ring & Arm positioning system is compatible with all XCP film and sensor biteblocks.

Added 06/10/2009

Currently in user testing and scheduled to be available for purchase by the third quarter of 2009, the KODAK 1500 Intraoral Camera features proprietary liquid lens technology that instantaneously focuses like the human eye, as well as the freedom of “Wi-Fi." The camera is engineered to deliver exceptional image quality and ease-of-use.

The KODAK 1500 Intraoral Camera captures still images and video with the highest resolution currently available. True auto-focus of still images and video, elimination of undesired light reflection and automatic adjustment to lighting conditions further optimize image quality. Additionally, the liquid lens allows instantaneous and automatic capture of still portraits, full arch, intraoral and macro views with the help of light-emitting diodes (LEDs) that optimize illumination. These features allow improved visualization of hard-to-see areas including cracks and other lesions and potential oral hygiene issues.

Built-in “Wi-Fi” wireless capabilities provide total freedom of movement without any wired connections between the camera and docking station, resulting in a seamless workflow and user experience. The small docking and charging stations allow for easy installation and use anywhere in the practice, encouraging camera sharing across multiple operatories. The automatic sleep mode and extra battery ensure the camera is always ready for use.(A “wired” version will also be sold, including all the same features and benefits except for wireless communication.)

Still images and live video quickly display on either a computer or video monitors. When used with a computer, images can be stored and managed with KODAK Dental Imaging Software. And when used with a video monitor, images can be saved on memory (SD) card and transferred to a computer for printing and storage. This printing feature is especially useful for supporting third-party reimbursement.

Based on feedback from dental practices around the world, the KODAK 1500 Intraoral Camera incorporates a stylish design that combines with a simple software interface for maximum comfort and ease of use. The compact, lightweight camera is ergonomically designed to comfortably fit the user’s hands, making it easy to hold steady and maneuver inside the mouth—even in hard-to-reach areas.

Added 06/08/2009

The UltraLite CX ceramic-bearing MULTIflex®-compatible highspeed handpiece does not need lubrication, which saves time and money, and eliminates the risk of handpiece lubricants getting on the cavity prep and diminishing bond strength. Two head sizes are available: compact (Model 557) and full size (Model 757).

The UltraLite CX handpiece requires no user lubrication. It features ceramic bearings, which significantly extend bearing life. The company’s proprietary Debris-Shield™ Bearing Shield System minimizes debris accumulation in the bearings.

Lares handpieces feature higher cutting power, compact size, feather-light weight, and an integrated fiber optic handpiece lighting system. The UltraLite CX Handpiece is has 360-degree swivel and push-button bur changing.

Added 06/02/2009

Sharp premium vinyl polysiloxane materials combine excellent hydrophilicity with superb dimensional accuracy and incomparable tear strength.

Sharp syringeable Wash material naturally reduces surface tension while flowing easily into difficult areas, due to its exceptional moisture-seeking and displacement capabilities.

Available in multiple viscosities, each Sharp product has been optimized for ideal flow. Sharp features a 90-second working time and a 3 minute set, and is compatible with all types of dental stones.

It is designed to use the same cartridge-dispensing products (split cartridge gun, mixing tips and intraoral tips) as other Parkell products. Sharp comes packaged in boxes of two 50ml cartridges and is available in Extra Light Wash, Medium or Heavy Tray, and a versatile Medium-bodied Clear formula for special situations.

Details are available by calling 800-243-7446.

Added 06/01/2009

Sirona’s five new starter handpiece kits comprise the company's most popular handpieces including its high-speed air-driven and electric high- and low-speed handpieces. Every kit comes with Sirona’s T1 Spray, giving the dentist the ability to keep their important investments properly maintained. The five new kits come with a variety of handpieces including:

• T2 Racer – a high-speed air-driven handpiece with titanium-plated casing and an ergonomic design shaped to fit the user’s hand comfortably.
• T2 mini – another high-speed air-driven handpiece, similar to the T2 Racer, but with a smaller head.
• T1 CLASSIC S 200 L – high-speed electric handpiece that is ideal for the preparation of fissures (eg, before sealing), the removal of enamel and dentin and the smoothing of cavity margins.
• T1 CLASSIC S 40 L –the low-speed electric handpiece version of the S 200 L.

The New Starter Handpiece Kits include:

The 61 49 715 Air-driven Starter Kit comes with one T2 Racer, one T2 mini handpiece and T1 Spray. Dentists can save 20% for a total retail price of $2,225.
The 61 49 723 Electric Starter Kit comes with one S 200L, one S 40L handpiece and T1 Spray. Dentists can save 20% for a total retail price of $2,575.
The 61 49 731 Air-driven and Electric Starter Kit comes with one T2 Racer, one T2 mini, one S 200 L, one S 40 L and T1 Spray. Dentists can save 25% for a total retail price of $4,395.
The 61 49 756 C8+ Electric Starter Kit 1* comes only with Sirona’s electric handpieces (three S 200 L and one S 40 L) and T1 Spray. Dentists can save 25% for a total retail price of $5,010.
The 61 49 749 C8+ Air-driven and Electric Starter Kit 2* comes with two T2 Racers, one T2 mini, two S 200 L, one S 40 L, one coupler and T1 Spray. Dentists can save 25% for a total retail price of $6,830.

All handpieces included in the kits come with Sirona’s 3-year warranty.

Added 05/27/2009

The Schick CDR Elite intraoral digital x-ray sensor is designed to offer outstanding image quality, an easy-to-use design, and a robust, hard-wearing construction. Its images provide bold bone tribeculation, crisp lamina dura and a clear, clean DEJ .

CDR Elite incorporates Schick's proprietary removable cable technology (introduced with the CDR PlusWire) on all three sensor sizes for a l-step cable-replacement process.

Simple and easier sensor placement, even for vertical bitewings, comes from an optimally located sensor-cable interface and a new color scheme that provides high visibility in the oral cavity.

CDR Elite's Smart Remote System has been developed to allow simple, accurate, in-office diagnosis to ensure peak performance of the entire system.

Added 05/22/2009

ToothIQ Pro is a Web-based interactive patient education system featuring more than 70 3-D animations and 2,000 pages of peer-reviewed content. There is no hardware or software to buy. It includes IQ Consult that allows dentists to email specific content to their patients, complete with animation—to help the patient better understand the value of their services and serve as a component of the practice's risk management strategy. The practice may elect to receive an email receipt when the content you specify is sent, and another when the patient has viewed the content. Servers also log the event, creating a record that the patient has been informed and that they've accessed the information provided.

Added 05/22/2009

Utilizing controlled three - dimensional ultrasound vibrations for safe and selective cutting, the PIEZOSURGERY surgical unit is designed for a wide range of bone surgery applications, including Osteotomy, Osteoplasty and Extraction in Implantology, Periodontology, Endodontics and Surgical Orthodontics.

Features include MicroMetric Cutting Action, Maximum Surgical Precision, Selective Cutting Action with vrtually NO damage to soft tissue, Cavitation Effect, and intra-operative visibility and a blood-free surgical site.

Added 05/21/2009

The EA-30 electric motor features a petite, lightweight design. It accommodates the new A dec|W&H Alegra gear-driven attachments and is available as an integrated option for the A dec 300 delivery system.

Offering a light, balanced feel similar to that of an air-driven highspeed, the EA-30 covers all general restorative applications from highspeed to lowspeed to prophy. It combines a low noise level with 3 Ncm of torque and 55W of cutting power. It seamlessly integrates into the A-dec 300 delivery system for comfort and efficiency. The simple-to-operate A-dec 300 deluxe touchpad adds precision speed control.

Added 05/20/2009

ViewPoint orthodontic practice management system features a wide range of imaging, communication capabilities and a wide range of time-saving tools. ViewPoint is used by practices of all sizes - from one notebook startups to multiple-office locations networked with over 100 computers. It is regularly updated to bring exciting new features and technologies to those who wish to incorporate them.

The comprehensive sytem handles patient information, financials, insurance, treatment findings, tooth chart, status tracking, referrals, recalls, progress and dental visit reminders, a complete array of management reports, and many other practice management functions in a graphical, logical interface. Features include a Grid Scheduler, Electronic insurance claims submission, and complete patient image management. Communication tools include phone and email appointement reminders, text messaging, task lists, and time clock. A variety of Internet tools are included as well.

optional Modules include SmartCeph with easy to use guided tracing, Treatment chart, Patient sign-in, and operatory display.

Added 05/04/2009

The pen-style MAXIMA LED Curing Light with Ramp-Up is a lightweight, cordless device with an automatic ramp-up feature that allows the light to increase in power to minimize composite shrinkage. The compact and ergonomic model features a digital display that is programmable in 5-second increments for multiple curing cycles, generates an output intensity of 1000 mw/cm2, and has an automatic cooling mechanism to prevent overheating. Fully charged, the battery provides over 400 ten-second cures. The light carries a 1-year warranty.

Added 04/29/2009

The VistaPure system produces two grades of water — distilled-quality water for autoclaves and ultra filtered non-corrosive water for bottles used with dental delivery systems.

The first stage is a prefilter that removes sediment, chlorine, chloramines, trihalomethanes and other contaminants by physical filtration, absorption and adsorption.

Next is the hyper filtration stage where pressure forces the water through a semi permeable membrane, removing contaminants at the molecular level. Impurities such as nitrates, sulfates, heavy metals, sodium, calcium and approximately 95% of other water contaminants are removed and rinsed away from the membrane and down the drain.

The water is then sent to a cartridge that contains both cationic and anionic resins for removing any remaining contaminants by a deionization process.

The final stage is a polishing filter. The finished water is then sent to a 2.7 gallon storage reservoir where it is easily dispensed for use.

The system is a standard feature of Solaris Sterilzation Centers.

Added 04/23/2009

The VistaClear dental waterline treatment system eliminates the need for independent bottles. Offered in single- and multiple-operatory versions, the system is suitable for new office construction, remodels or retrofitting into existing offices. The patented design isolates operatories from other water sources for enhanced infection control. Each system includes backflow prevention check valves.

Added 04/23/2009

The AeroPure vacuum features oil-less dry regenerative blower technology. No water or oil is needed, reducing the environmental footprint and eliminating costly water bills and expensive oil. Described as reliable and quiet running, the AeroPure Vacuum eliminates the need to ever replace oil or filters. Its float technology minimizes the risk that foam will damage the motor. AeroPure has an exceptionally high flow (CFM) at the optimal inches of mercury (in-Hg). Better flow means that the user can move more debris out of the oral cavity. This ensures that you have the right amount of flow in every operatory.

Added 04/22/2009

With a -40şF dewpoint, AeroPure compressors feature extra dryers and filters to reduce the risk of bacteria. With it’s patented oilless rocking piston design, AeroPure requires minimal maintenance and its compressor heads use a proven design with over 15 years of rugged experience in harsh environments. AeroPure’s energy efficient motors offer 2 minute pump up with 25 second recovery time. This ensures that during periods of heavy use, this workhorse will minimize lost flow and keep all operatories running strong.

Added 04/22/2009

The compact, portable Picasso soft tissue diode laser delivers clinical results and ease of use with the portable design. Its 810nm wavelength provides clean cutting and hemostasis in a wide range of soft tissue procedures It is known for precision cuts with gum tissue, eliminating bleeding at the site and reducing healing time. Picasso also can be used to help sterilize canals in endodontics, treat periodontal disease, and aid in tooth whitening. Gingival troughing with the Picasso around your preparation also eliminates the need for retraction cord. Features include:

0.1 - 7.0 Watts
Touch screen interface
Continuous or pulse modes
8 Customizable presets
Adjustable aiming beam
Multiple language menu
Compatible with US and international power outlets; 110/240/ volt compatible
3-year warranty

Added 04/15/2009

The ClikStik holding system can be used with sensors, PSP plates or x-ray film. The ClikStik allows the use of any Bite-Block and Bite piece; anterior, posterior and bitewing, from all manufacturers such as RINN™, Flow™’, Schick ™, Dexis™ and others with one instrument, one ring and one simple rod.

The ClikStik™ is a fully autoclavable, twin head holder that positions the ring as close to the cheek as possible without rod interference for increased accuracy.

Added 04/13/2009

The VALO LED curing light features a slim footprint to enhance access into the oral cavity without compromising patient comfort or curing efficiency. Its focused columnar beam delivers a complete and uniform cure and its broadband LEDs prevent overheating. The light offers three curing options--standard power, high power, and a plasma emulation mode. The light slender aluminum body reduces weight and enhances durability.

Added 04/07/2009

Bond-1 SF is a solvent-free, one-coat, self-etching adhesive. Suitable for use with direct composite and dual-cure materials, it provides bond strengths up to 30.4 MPa in 3 steps: uniform application, rubbing for 20 seconds, and light curing.

Bond-1 SF eliminates the need to air dry to protect against sensitivity; prevents evaporation for stability and consistency; eliminates the need to acid etch for shorter procedure time; and exhibits optimal handling properties for a uniform covering.

Added 04/05/2009

Triotray rigid and accurate posterior impression trays eliminate bounce-back and lock impression material in the side tabs. The trays' sturdy metal frame incorporates side tabs adjust to suit all patients, including those with shallow palate, wide buccal plate or mandibular tori. The thin retro-molar area allows patients to easily close in centric occlusion. Triotrays consistently take successful impressions – saving time and eliminating frustration.

Added 04/05/2009

Le Petit Masque is a facemask specifically designed to fit small faces. It is 3/4” shorter to eliminate gapping, for a more comfortable, protective fit. Five percent of proceeds from the purchase of the pink-colored mask goes to fund women’s cancer research at Memorial Sloan-Kettering Cancer Center.

Outer layer is fluid resistant, inside is soft, white spunbond. Meets ASTM* F2101-07 Standard as a Low (Primary) Barrier face mask based on fluid resistance, filtration value, breathability and flammability. *(American Society for Testing and Materials)

Added 04/02/2009

Dental marketing expert, Fred Joyal, CEO and Co-Founder of 1-800-DENTIST, has released a new book titled Everything is Marketing: The Ultimate Strategy for Dental Practice Growth. It is available in hardcover or as an audiobook at www.GoAskFred.com store, or as a Kindle download at www.amazon.com.

The book covers a wide range of topics including:
• Why dentistry’s unique business model is such a huge advantage
• How to create an unexpected and unforgettable patient experience
• Why patients leave your practice—and how you can keep them for life
• Proven ways to boost patient loyalty and word of mouth
• Secrets to building a strong (and happy) team that your patients will fall in love with

Added 04/01/2009

The Defend+Plus Sterilization Pouch with Built-In Dual Internal Indicator eliminates the need to use separate indicator strips.

Defend+Plus pouches feature the same superior design and quality construction of standard Defend® pouches, but include a built-in dual internal indicator (Steam and ETO). This allows the user to see that the correct sterilization temperature is reached within the instrument compartment without having to place an indicator strip inside the pouch. The dual internal indicator provides an extra measure of security.

Defend+Plus Pouches with Built-In Dual Internal Indicator are offered in five sizes, packaged 200 to a box.

Added 03/31/2009

DentLight introduces major upgrades to FUSION™ LED curing light with significantly improved functionality and ease of use. The versatile high power portable cordless curing light features a solid metal body design along with focused LED Beam technology that provides a 1500mW/cm2 light beam. Additionally, the light maintains high power over distance for fast, deep and reliable cure.

Key recent upgrades include:

• Unique backlit metal keypad controls with raised ON/OFF key for easy operation
• Interchangeable 360° swivel light probe with 10mm large tip for curing of all materials
• 7-mode LCD digital displays
• Options of tacking tips, lens modules and caps to cure from 3mm to 13mm
• Options to directly mount and charge the light on a dental unit

Added 03/26/2009

Designed for use in both private practice and institutional dental care facilities, the Master 3DS cone beam imaging system offers a new GPU solution--3D reconstruction time improved to less than 35 seconds with even less 3D CT scan time: 15 seconds for normal and 24 seconds for high def.

The field-of-view (FOV) selection provision enables the user to select the optimum FOV size (20x19/20x15 cm, 16x10 cm, 16 x 7 cm) and limits the radiation dosage to only the necessary level for examination contained to the region of interest. For example, the FOV size of 20 x 19cm captures a comprehensive 3D view of the entire oral and maxillofacial anatomy including the TMJ, sinus, and airways on a single 360 degree scan whereas the FOV of 16 x 7cm would capture both mandibular condyle and upper and lower occlusion area of oral anatomy.

EzImplant, the dynamic and efficient 3D image solution, offers comprehensive information for precise assessments, diagnosis, and treatment plans by using the auxiliary functions such as measuring, canal tracing, cross-sectional viewing and implant simulation.

The Master 3D series provides a selection of voxel sizes which improves the overall image resolution. The smaller voxel size (0.164mm) offers the highest image quality while normal voxel sizes (0.3, 0.4mm) are suitable for diagnostic images with less reconstruction time and smaller file size.

With the new Master 3DS, there are 3 types of patient positioning – standing, seated (optional chair), and wheel-chair-confined patient accessibility.

Added 03/25/2009

Equipped with a new generation of CMOS digital sensor, the PaX-Primo digital panoramic x-ray unit delivers diagnostic panoramic X-ray images equal to digital photo quality. Also available is PaX-Primo(i) model with optional ALSA (Automatic Layer Selection Algorithm) functionality to produce optimal digital diagnostic images by using VATECH’s proprietary “Area Adaptive Mode” (AAM) solution. The AAM solution captures and instantly processes multiple oral trough layers during a single panoramic scan, and intelligently reproduces a final diagnostic image by selecting the optimal single layer in different regions of the image to minimize image distortion in every panoramic image taken.

Both models:
• PaX-Primo
• PaX-Primo(i)
include a high resolution 10.4” LCD touch panel for easy operation and simple image previewing. Both units feature compact size, light weight (less than a 4’ cube, and weighing less than 165 Pounds), and ease of installation.

Added 03/25/2009

Compatible with most intraoral mirrors for intraoral photography, the PhotoMed Universal Mirror Handle allows the mirror to be positioned inline with the handle or the mirror can be angled. There is approximately 35° of rotation to allow comfortable positioning for buccal and occlusal views. The handle can be locked to hold the mirror at the desired angle.

The Universal Mirror Handle is available individually to work with existing mirrors or in a kit that includes: (1) mirror handle, (1) adult occlusal chromium mirror, (1) buccal T1 chromium mirror and (1) "O" utility mirror.

Added 03/25/2009

Engineered to cut at speeds comparable to a high-speed handpiece, the Waterlase MD Turbo all-tissue laser operates in a non-contact mode (it never touches the tooth), using laser energy and a gentle spray of water to perform restorations without heat, vibration or pressure.

A contra-angle handpiece with a computer designed optical tip replaces the traditional handpiece and its fiber tip. The optical tip is capable of focusing the laser beam to a 500- or 700-micron diameter spot size, depending on which of two available Waterlase MD™ Turbo tips is used (MX5 – 500 microns, or MX7 – 700 microns). The beam maintains this spot diameter for a distance of approximately 1 3 mm at a distance of about 3 – 5mm from the tip, providing maximum cutting efficiency across that distance, for fast and effective Classes I –V cavity preparations.

Additionally, the Waterlase MD Turbo provides ultra-bright, shadow-free illumination and red aiming beam for enhanced visibility and tractability in the surgical field

Added 03/19/2009

Two new panoramic bitewing programs (BW1 and BW2) are available for the ORTHOPHOS® XGPlus and XG 5 panoramic units and allow the practitioner to take a diagnostic image quickly and easily.

The new bitewing programs provide practitioners with the option of taking an extraoral bitewing image when an intraoral image is difficult or not feasible. The programs are easy to use, and are a low-dose alternative for diagnosis in the posterior and anterior regions.

The BW1 posterior program provides additional diagnostic information compared to standard intraoral bitewings and is a suitable alternative for patients with challenging intraoral anatomy. With the XG 5, both sides are imaged, while the right, left or both sides can be selected on the XGPlus units.

The BW2 anterior program provides a detailed overview image of the anterior area. It can be used with the edentulous positioning guide for anterior trauma patients. It is a lower-dose alternative to multiple occlusal images when focusing on the anterior region.

Added 03/16/2009

The XD-2 Diode Laser is an exceptionally lightweight, economical, portable laser system. The laser is manufactured by Fotona, the leading European manufacturer of all-tissue dental lasers.

With 7 watts of peak power, the XD-2 can perform procedures such as frenectomies, gingivectomies, crown lengthening, papillectomies, gingivoplasty, treatment of aphthous ulcers, removal of diseased tissue within the periodontal pocket, photocoagulation, soft tissue curettage, and laser-assisted whitening.

The XD-2 is easy to use (there are 4 preset treatment options), and an intuitive operator interface allows the operator to quickly tailor parameters to specific treatments. At just over 2 pounds, the compact, hand-held laser is extremely user-friendly and is an excellent choice for clinicians making their first laser purchase.

Added 03/04/2009

The ergonomic Polaris intraoral video camera features a 330-degree swivel head enabling simple capture of all angles an a rounded, ergonomic design for easy grasping and operation. Polaris’ optical glass lens offers an exceptionally large depth of field--all objects from 4 mm to 25 mm are automatically in sharp focus--as well as sharpness and true-to-life soft tissue color.

Polaris USB provides power and data transfer in a single computer connection. And, Polaris Universal offers multiple connectivity options including USB 2.0, S-Video, and Composite Video Outputs.

Specifications are listed below for both models--USB and Universal:

Polaris USB
Dimensions: 8 7/8" length, 1.08" diameter (handpiece)
Weight: 3.7 oz (handpiece)
Resolution: 640 x 480 pixels
Video Outputs: High Speed USB 2.0, Video
Illumination: Ultra-bright white LED lamps
Image: Normal, not mirrored

Polaris Universal
Dimensions: 8 7/8" length, 1.08" diameter (handpiece) / 5.7" length x 3.8" width x 1.5" depth (control module)
Weight: 3.7 oz (handpiece) / 8 oz (control module)
Resolution: 640 x 480 pixels
Video Outputs: High Speed USB 2.0, Video, S-Video, Composite Video
Illumination: Ultra-bright white LED lamps
Image: Normal, not mirrored

Added 03/03/2009

Accommodating standard 380-ml impression material cartridges, the Fresh Profimix automixer offers a dispensing speed of 80 to 90 ml per minute. Its translucent cover allows monitoring of contents. Control wheels on either side of the unit accommodate right- and left-handed users.

Added 03/02/2009

Best Technology Creates the Best Image

At Panoramic, we utilize the best technologies in our products so that you can create one of the best digital images possible. Our PC-4000 uses proprietary Cadmium Telluride (CdTe) technology to capture images with up to 300% more clarity than the conventional CCD/CMOS digital technologies found in most of our competitors’ machines. The CdTe sensor is more efficient because it minimizes light distortion by directly converting X-ray energy into electronic digital output. The PC-4000’s superior image data selection interface allows you to resolve imperfections caused by poor patient positioning or unclear anatomical landmarks.

Best Service, Best Support

The PC-4000 imaging software is DICOM and TWAIN compliant and compatible with most popular practice management software suites including Dentrix®, EagleSoft®, and PracticeWorks®. The PC-4000 includes a free computer, monitor, and proprietary diagnostic software program, allowing easy integration with your existing computer network and practice management software. Same-day training (either in your office or on the phone and web) will prepare you and your staff to use your PC-4000 effectively and efficiently. The PC-4000 is backed by Panoramic Corporation’s industry leading 2-year parts and labor warranty and free technical support.

With an unbeatable price, clear-cut diagnostic advantages for your patients, and economic benefits for your practice, you cannot afford to pass up the PC-4000 Fully Digital Panoramic X-Ray System.

Added 03/02/2009

Vanish™ XT Extended Contact Varnish is a site-specific, light-cured durable coating that provides an immediate layer of protection to relieve dentinal hypersensitivity. It is particularly helpful for protecting exposed, sensitive root surfaces, especially newly cleaned surfaces following scaling & root planing.

The varnish remains on the tooth for six months or longer and is moisture tolerant, eliminating the need to dry or pre-treat the root surface. Its use requires no rubber dam. Offering fluoride, calcium and phosphate release, the resin-modified glass ionomer formulation significantly reduces dentin permeability by occluding dentinal tubules in-office for immediate pain relief. Vanish XT also protects the tooth surface from acid attack.

In vitro tests conducted with Vanish XT demonstrate that the coating:

• Creates a barrier against demineralization and acid erosion
• Provides protection beyond the coating
• Helps repair demineralized enamel adjacent to the coating by fluoride toothpaste

Added 03/02/2009

Allowing optimal integration of technology for its class and well-positioned to fit small spaces and conservative budgets, the new A-dec 300 system offers customers a mid-level platform choice that’s lower in cost than the A-dec 500®, yet maintains high performance, service, and support.

The A-dec 300 comprises a patient chair, delivery system, light, monitor and assistant’s instrumentation. It incorporates a compact control head that supports two electric micro-motors, integrated floor box, small base plate and dedicated left/right support center.

Other features include an ultra-thin 1.5” (38mm) thick backrest that provides optimal access to the oral cavity, to the 13.75” (34.9cm) to 29.5” (74.9cm) vertical range that allows doctors of all heights to sustain posture and position arms at sides. Traditional or Continental® delivery system options are available and A-dec 300’s modular design allows dentists to choose the options and combinations that best suit individual working styles.

Added 02/27/2009

The DEXcam 3 Intra-oral Video Camera provides highly defined image quality utilizing a seven-element glass optical lens, four bright LEDs and an internal prism for optimal lighting, along with its Sony® CCD sensor. Precision-ground glass optics virtually eliminate image distortion.

Features include the light-weight handpiece that offers maneuverability; the slide focus that allows viewing of intra-oral and extra-oral images without a lens change; and the capture control that freezes the streaming video into a still image with a simple press, then saves the image to the patient record with another press.

DEXcam 3 is ultra portable and easily accessible. The high-speed direct USB connection requires no docking station and quickly and easily disconnects for transfer between operatories.

Added 02/26/2009

Because of its unique initial hydrophilicity, Panasil® initial contact “wash” impression materials can immediately overcome any remaining moisture in the mouth, resulting in an exact impression every time, even in situations with a deep sulcus or a moist environment. Panasil initial contact is highly thixotropic, with outstanding flow properties and a short intra-oral setting time. Because of its outstanding flow properties, Panasil® initial contact will enter narrow gaps and does not slump or drip off the tooth into the oral cavity.

Panasil® initial contact is available in three viscosities – X-light (very low viscosity), light (low viscosity) and regular (medium viscosity). Panasil® initial contact X-light flows evenly into extremely tight crevices and, during two-step putty-wash impressions, forms only a thin layer on the preliminary impression material. The even higher thixotropy of Panasil® initial contact light is often used for one-step impression techniques. All three viscosities will be available in a fast set.

All three Panasil® initial contact viscosities have a total working time of 1 minute, 30 seconds and an intra-oral setting time of 2 minutes, 30 seconds. When the fast set is introduced, it will shave 30 seconds off both the total working and the intra-oral setting times. All materials are available in the following delivery units: 2 × 50 mL with 12 mixing tips and 12 × 50 mL with 72 mixing tips.

Added 02/25/2009

The Crescent Premium Memory Bodyrest Pad was developed to soothe patients during lengthy procedures while providing pressure point relief to the body. This pad is a thicker and larger version of the Standard Bodyrest pad and contains a heavier density memory foam. It is available in full-chair and half-chair versions, in teal, gray, and beige colors.

Added 02/25/2009

The new Medium DV (Deep Vestibule) mouthpiece for the Isolite dryfield illuminator allows for more complete tongue retraction and a better fit in a patient’s mouth. Its expanded cheek shield shape provides improved suction that goes deeper into the vestibule. The new design also provides for additional suction capacity within the bite block itself, assuring saliva does not pool behind the mouthpiece.

The mouthpiece features an expanded shape of the tongue retractor for better control of the tongue and a better fit in the patient’s mouth; an expanded shape of the cheek shield for improved suction that goes deeper into the vestibule; and additional suction capacity within the bite block itself, to make certain that saliva doesn’t pool behind the mouthpiece.

Additionally, the mouthpiece sleeve is slightly larger so that it fits on to the Isolite i2 dry — field illuminator control head more easily (reducing the need for Isolite Mouthpiece Lubricant to attach the mouthpiece to the control head).

With the addition of the Medium DV mouthpiece to its product line-up, Isolite Systems now makes available five distinct mouthpieces which are designed to fit patients varying in size — from small children to large adults.

Added 02/25/2009

Built on the KODAK 9000 platform, the KODAK 9500 Cone Beam 3D System enables dental professionals to quickly produce high-quality 3D images, ranging from dual jaw to full craniofacial images, while optimizing dose. It is engineered to produce high-quality, anatomically-correct 3D images down to 0.2 mm voxel (VOlume piXEL) size, for more accurate diagnoses, improved treatment planning and more efficient patient care.

Featuring a user-friendly and stylish design that aids in patient comfort and satisfaction, the KODAK 9500 3D System provides face-to-face patient positioning to accommodate standing or seated patients, including wheelchair patients, of varying body types and sizes. Program selection with pre-programmed settings occurs directly on the system’s intuitive interface, simplifying patient setup and exam preparation.

The system also provides full-featured 3D visualization software designed for the needs of dental professionals. The software is intuitive and easy-to-use, enabling users to focus on diagnosis and treatment. The application includes an implant planning/simulation module and implant library, and will be compatible with third-party implant planning applications. Image output occurs in DICOM formats, supporting flexible output options including printing and customizable report templates.

The KODAK 9500 3D System captures dual jaw (9 cm x 15 cm) or all dento-maxillofacial anatomy (18.4 cm x 20.6 cm) in one acquisition for a wide range of clinical applications. With the additional ability to control patient dose through variable settings of mA and kV, dental professionals can manage the patient dose by focusing on their immediate clinical needs. This enables users to maximize image detail required for the specific application while managing patient dose.

The KODAK 9500 3D System is currently available for purchase in limited quantities in the United States and parts of Europe, with general availability scheduled for Q2 of 2009. In addition to the large-field 3D system, a medium-field option will be sold in the United States—providing the dual jaw imaging program only.

Added 02/24/2009

The OrthoPlex 3D orthodontic service enables doctors to order a digital model and a custom lab-appliance from a single impression. Created using cone beam CT technology, OrthoPlex models are accurate and are delivered in 3 business days or less.

OrthoPlex models can be accessed anytime because as they are stored online; they are automatically archived for 7 years or more on reliable, encrypted, multiple servers at no charge.

Digital models can be downloaded to the practice computer, viewed and analyzed via free user friendly software available. Models also can be accessed online from anywhere and shared with colleagues via a HIPAA-compliant "Private Peer Network" (PPN).

Added 02/23/2009

Crown Seating dental stools are available with medical-grade Silvertex fabric, which uses Silverguard™ technology to control a wide range of odor and stain causing bacteria, including staphylococcus aureus, MRSA, salmonella choleraesuis, and e. coli. Silver ions engineered into the chemistry of Silverguard™ are highly effective against bacteria because they attack the bacteria cell wall, disrupt protein metabolism within the cell, and form complexes with other biomolecules in the cell to alter cell functions. The ions are slowly released out of their inorganic matrix in the presence of moisture. Offered in a wide range of colors, the Silvertex™ fabric stays fresh, lasts longer, and is a natural environmentally friendly bacteria-fighting defense to inhibit odor and bacteria. It is EPA registered and FDA approved.

Added 02/22/2009

Available in styles for for hygienists, doctors and assistants, the Swedish Support Stool incorporates many ergonomic features to improve the posture of the user and alleviate many of the causes of back and shoulder discomfort. The waterfall front, bowl-shaped seat and rib-hugging back are multi-adjustable for a custom fit. Crown Seating provides customization with many styles of casters, bases, cylinder heights, and arms. Hundreds of colors are available in standard medical-grade vinyls, Ultraleather™ premium vinyls, as well as several colors of breathable, natural leather. Introductory retail prices range from $940.00 for the doctor/hygienist stool, Model #C85SD, to $1090.00 for the assistant stool, Model C85SA

Added 02/22/2009

Designed to provide optimal ergonomics and user comfort, the Crown Seating C90SBB Saddle Stool features an adjustable seat and backrest. Popular with smaller-frame users, the saddle-style seats provide a superior positioning of the legs and lower back, compared to traditional-style operator stools. The seat shape is shortened in the front to promote a closer positioning to the patient and the lumbar-style backrest is fully adjustable to allow the user to fully relax and lean back to lengthen and relieve over-stressed core muscles. The stool is available with a wide selection of bases, cylinder heights, casters and fabric choices. The introductory retail price is $775.00.

Added 02/22/2009

The DIAGNOdent caries detection system has been optimized and expanded with the DIAGNOdent Display 2191, a stand-alone display that receives its data remotely from the DIAGNOdent pen and displays them enlarged and distinct.

Measurements are quickly and easily visible to you and your patients. The measured results of the DIAGNOdent pen are sometimes difficult to read, and sometimes they do not lie within the patient‘s line of vision. In these instances, the optional remote display can be used.

By means of an infrared interface, the DIAGNOdent are shown both on the handpiece and the display. It can be set up wherever you and your patients need to obtain clear visual confi rmation that caries treatment or calculus removal is necessary.

Features include:

• Easily visible and readable DIAGNOdent values
• The values are readable both on the display and the DIAGNOdent pen
• Easier to work
• No annoying cable
• Better patient retention
• Useful as a starting point for patient consultation and a patient recall system

Added 02/19/2009

Compact enough for placing on a cart or countertop, the Demolizer II provides a simple, effective solution to biomedical waste management at the point of generation, thereby eliminating the possibility of sharps and red bag biomedical waste being disposed of directly into the environment. With the touch of a button, biomedical waste processed with the Demolizer® II is rendered sterile and non-biohazardous and does not generate hazardous or toxic compounds. The system eliminates waste hauling costs up to 100% with this proven, cost-effective approach to on-site biomedical waste management, It offers low capital expense and low cost consumables, and requires no special facility or electrical requirements . Additionally, it eliminates excess handling of infectious waste as well as the risk of exposure to patients and staff during storage.

Added 02/18/2009

The ADC-01P-RED Portable Pediatric Dental Chair is designed specifically for examining and treating children in public health and school-based environments. Features include:

• Weighs only 30 Lb (13.6 Kg) and accommodates patients up to 500 lbs (225 kg)
• Headrest cushion, arm slings, and soft-sided carrying case are standard features – no hidden costs
• Compact, one-piece design sets up / folds down in seconds, with no loose pieces to be lost or damaged in transit
• Shorter backrest may be adjusted from vertical to supine for improved access and patient comfort
• Seat height may be easily set to any of five (5) positions
• The toe board may be folded down, converting the ADC-01P-RED into a standard exam chair
• The carrying case has additional carrying handles to facilitate transport from the vehicle to the work site
• Durable, red upholstery is appealing to patients and easy to keep clean

Added 02/17/2009

The eBite dental examination light is an LED lighting device that provides additional intra-oral illumination and cheek retraction. The eBite is an ideal resource for those working without a chair light or in a limited lighting environment. The light greatly improves the dental photographer’s ability to see inside the mouth and pinpoint desired subject area. The device is autoclavable and cold sterilizable and provides cheek retraction for anterior, lingual, and occlusal photography. The eBite is battery powered and includes ac charger.

The eBite is a ideal accessory for the dental photographer assisting both the user and camera in taking the best and most accurate dental photos. Doubling as cheek retractors, the eBite frees a hand to hold a mirror inside the mouth going to great lengths to make dental photography a one person job.

Price, $250.00.

Added 02/10/2009

Offered in 1.23% APF and 2.0% NSF formulations, PediaGel™ topical fluoride gel is supplied in sleek, crystal clear bottles with easy-to-handle, ergocap packaging for simple one-handed tray delivery. Offering 1-minute flouride uptake, the APF version is available in bubblegum, grape, and strawberry flavors. Suitable for older children with sealants and adults with restorations, the non-etching NSF formula comes in spearming, apple cinnamon, and orange vanilla flavors.

Added 02/09/2009

OraVerse local anesthesia reversal agent accelerates the return to normal sensation and function for patients who want to avoid the unwanted and unnecessary lingering soft tissue anesthesia. OraVerse has been proven safe and effective for adults and children 6 and older and weighing 33 lbs. or more. Patients who received OraVerse experienced a return to normal sensation and function in approximately half the time.

OraVerse comes in a standard dental cartridge and is easily injected utilizing the same injection site and an identical technique as that used for local anesthetic. It is used in a 1:1 ratio to local anesthetic.

Added 02/04/2009

The Snapshot intraoral digital x-ray sensor is ready for use just by plugging the USB cable into any computer having a Windows XP or Vista operating system. The sensor is detected automatically and all needed drivers are copied directly from the sensor without user action. This, combined with the absence of a tabletop electronics unit, make sharing the sensor between operatories particularly convenient.

The Snapshot sensor has smart, integrated electronics, eliminating the need for separate boxes limited workspace environments. A convenient wallmounted storage device provides safe, convenient storage.

Virtually every intraoral image can be captured with just one X-ray setting. Snapshot’s wide dynamic range provides superior images of different parts of the dentition without altering the settings on your X-ray device.Snapshot’s imaging software is a sophisticated tool for taking an image series (template). The software guides you through the Full Mouth Series and automatically orients the images.

Two sizes of sensors can be active at the same time, which allows changing between sensors without interruptions.

The sensor design produces up to 20 lp/mm true resolution (26,3 lp/mm theoretical). You get razor-sharp images, with the low noise typical of CMOS technology. A wide dynamic range and an anti-blooming CMOS chip ensure consistently successful images.

Added 01/29/2009

Version 11.2 of KODAK ORTHOTRAC Practice Management Software offers integration with QuickBooks in order to help make orthodontic practices more efficient and eliminate reliance on paper-based systems.

OrthoTrac users can improve productivity and reduce data entry errors by exporting the OrthoTrac software deposit totals to QuickBooks. The account into which deposits will be added will be automatically set up, including the individual category such as cash, checks, credit cards and electronic deposits.

Added 01/26/2009

Available for professional dispensing only, Clinpro 5000 1.1% Sodium Fluoride Anti-Cavity Toothpaste contains a tri-calcium phosphate ingredient; it contains fluoride as well as calcium and phosphate, which are components naturally found in saliva. During the manufacturing process, a protective barrier is created around the calcium allowing it to coexist with the fluoride ions. As the toothpaste comes in contact with saliva during brushing, the barrier breaks down and makes the calcium, phosphate and fluoride readily available to the tooth. The tooth naturally absorbs these components, helping to prevent the initiation and further progression of demineralization and allowing remineralization to occur.

The toothpaste offers a wide range of benefits:

• Strengthens teeth better than leading brands
• Reverses white spots better than leading brands
• Delivers more fluoride to the tooth than other tested leading brands
• Contains 1.1% NaF (5000 ppm fluoride ion)
• Contains an innovative calcium and phosphate ingredient
• Gentle cleaning, gentle whitening
• Low abrasion
• Replaces conventional toothpaste regimen
• Available in a convenient 4oz flip-top tube – 6 month patient supply
• Pleasant Vanilla Mint Flavor
• Recommended for ages 12 years and up (okay for ages 6 to 12 years but must rinse after use)
• 2 year shelf life

  Added 01/26/2009

Easy to use and clean, the Alghamix II mechanical mixer for alginates, plasters, silicones and gypsumsincorporates an ergonomic bowl position for optimal operating conditions. A new ABS body structure ensures maximum stability during use. The Alghamix II has 2 bowl rotation speeds (high and low) with an ergonomically positioned switch. The Alghamix II has been designed with a bayonet ring for securing the mixing bowl to the mixer that allows for the use of 350 cc mixing bowl and a new 600 cc mixing bowl. Mixing bowls come in a variety of colors (sold separately) including: gray, orange, green, light blue, blue, white (machine comes with grey bowl). The Alghamix II machine provides the following advantages:

• Reduced air incorporation during mixing
• Homogeneous mixing free from bubbles and lumps
• Constant bowl rotation guaranteed by the two speeds
• Structure and design specifically designed to guarantee maximum stability during use
• Ergonomic bowl position which allows for optimal operating conditions
• Easy to remove and easy to clean bowl
• Colored bowls easily adaptable to clinic colors
• 600 cc bowl for plaster and silicone mixing plate usable for various purposes.
• 3 year guarantee

Added 01/23/2009

Engineered for use with the Zimmer Tapered Screw-Vent® implants, the Zimmer Contour Angled Zirconia Abutment is designed to delivering an exceptional combination of strength, esthetics and simplicity. Like the straight Contour Zirconia Abutment, the angled abutment’s titanium ring provides a stable titanium-to-titanium fit with the Tapered Screw-Vent implant for added reliability.

Angled at 17-degrees, the Zimmer Contour Angled Zirconia Abutment provides a natural looking base for an all-ceramic, cement-retained crown in the esthetic zone. The abutment collar is contoured below the margin to create space for soft tissue without compromising strength or quality. Combined with the highly bio-compatible zirconia material, this provides an ideal esthetic result.

Added 01/21/2009

The new Veraviewepocs 3De imaging system offers digital 3D, panoramic, and cephalometric imaging options; no cassette change is required. This economical model features built-in sensors for all image types designed to save time and protect the hardware. With Ř 40 X H 40 and Ř 40 X H 80 mm 3D fields of view, 3De is suitable for over 90% of all clinical cases allowing for maxillary/mandibular arch diagnosis.

In addition, it offers a “true” panoramic image, not a reconstruction, facilitating insurance coverage. This model offers views with exceptional clarity for general dentistry, endodontics, and implantology.

Added 01/14/2009

OptraStick is an easy-to-use, flexible plastic instrument that enables clinicians and dental technicians to easily and quickly pick up, hold, and place/handle indirect restorations. With just light pressure, the OptraStick adhesive tip precisely adheres to a wide range of small objects, such as inlays, onlays, crowns or veneers.

OptraStick's ball-shaped, flexible adhesive tip can be easily bent and flexed in all directions to accommodate a variety of clinical or laboratory situations. For example, OptraStick is ideal for use when trying in indirect restorations; placing and removing etching gel inside ceramic restorations; silanating restorations; applying resin cements to restorations; and inserting/seating indirect restorations in the mouth and/or onto models in the dental laboratory. The OptraStick adhesive tip is removed or separated from restorations with a simple rotary movement (twist), or a hand instrument can be used to hold the restoration in place.

OptraStick is available in refill packages containing 50 instruments.

Added 01/14/2009

This dental camera kit is based on Nikon's 6 mp D40 camera. The D40 dental kit includes Dine's Mini Ring and Point Flash a flash designed specifically for dental photography and the 105mm dental lens with dental standardization guide. The package is suitable for photographing the full range of dental subjects from extreme close-ups of two teeth to anterior, lateral, buccal, occlusal, and facial photography. The package also includes a 1 gig memory card, memory card reader and 18-55mm personal lens. Price, $1495.00.

Added 01/14/2009

Formulated for cementation of ceramic and composite restorations, AURAVeneer VLC Self-Adhesive Cement features a honey-like" consistency, light cure, exceptional margins, a very low film thickness (less than 12 microns), does not run and does not require bonding agents or silane coupling agents. Physical properties include compressive strength of more than 50,000 psi and shear bond strength to etched enamel of more than 28 Mpa. Fluoride-releasing AURAVeneer is offered in four shades: Crystal Clear, Off-White, Yellow, and Opaque White. Using Denali Setting Chemistry, AURAVeneer is color stable and the clear shade is color neutral. Try-Ins offer the same handling and wipe off easily before cementation.

Added 01/09/2009

The NORAD (Nocturnal Oral Airway Device) is an oral appliance for the treatment of snoring and sleep apnea. It is a "boil & bite" appliance , eliminating the need lab fabrication. This makes it an ideal temporary appliance to use when patients need to undergo dental work or if they've lost or damaged their existing appliance.

Strong construction
Unlimited lateral mobility
Adjustable vertical and protrusive positions
Ability to open vertical with appliance in place
Very good retention
Low profile (minimum vertical just 5mm)

Added 01/09/2009

Intended for patient screening prior to sleep disorder diagnosis, Eccovision device uses acoustic reflection technology to accurately map out the size, structure and collapsibility of the oral and nasal airway.

A narrow airway reading on the Pharyngometer correlates to higher Apnea Hypopnea Index's once the person is diagnosed. After diagnosis the pharyngometer helps to show us how the airway changes in repsonse to mandibular advancement. Data from Pharyngometer & Rhinometer tests is displayed on an easy-to-read graph.

The Eccovision Acoustic Pharyngometer allows users to quickly and easily measure a patients pharyngeal airway size and stability from the Oral Pharyngeal Junction to the Glottis. The Pharyngometer graphically displays the relationship between the cross-sectional area of the airway and distance down the airway in centimeters. Studies have shown a clear relationship between the existence of OSA and a narrow, collapsible, airway. The test is minimally invasive and takes 2-5 minutes to complete.

The Eccovision® Acoustic Rhinometer allows for quick and easy measurements of nasal patency. It clearly identifies the location and severity of any obstruction in the airway. The test is completely non-invasive and takes 30 seconds to complete.

Added 01/09/2009

Rinn Digital Sensor Loops are designed to help position digital x-ray sensors when taking bitewing radiographs. With five different sizes to accommodate most brands, disposable Rinn Digital Sensor Loops easily slip over digital sensors to snugly hold them in place, regardless of the type of infection control cover used.

Their small size and light-weight construction make them easy to place and comfortable for the patient. Additionally, their single use design minimizes cross contamination risks. Free samples are offered.

Added 01/07/2009

Impregum Soft Polyether Tray Impression Material now is available in a cartridge delivery system, allowing the material be used in the one-step heavy body/light body technique or in the monophase technique. Additionally, cartridge delivery allows Impregum Soft Impression Material to be used easily in multiple operatories.

Among the material's properties are hydrophilicity for accurate impressions in moist conditions; optimal flow properties offer excellent precision and accuracy of fit; and a snap-set feature to prevent setting before the working time ends, and then does so immediately--this provides excellent detail reproduction without distortion.

Impregum Soft Impression Material offers improved taste, easier mouth removal and quick setting options.

Added 01/05/2009

Orascoptic Laser Loupes combine magnification and laser eye protection for dental professionals who perform frequent laser applications.They are a a lightweight, high performance alternative to heavy clip-on filters, or trying to fit goggles over traditional loupes.

Laser filters are built into both the telescope and the carrier lenses of this loupe. The filter in the telescope is made of high quality glass for superior optical clarity and resolution. The carrier lenses are made of high-index polycarbonate for peak performance and durability.

Filters are available for the most popular laser wavelengths including:
800 - 803 nm
940 - 980 nm
1064 nm
2780 - 2940 nm

Custom manufactured to specific facial geometry, working distance and declination, the loupes are available in two magnification power options.

Added 12/23/2008

ProJel-20 20% Benzocaine topical anesthetic gel features dye-free flavoring and offers no bitter aftertaste. ProJel-20 is delivered in mess-free jars and and convenient tubes to disburse amongst operatories or give out to patients. It comes in Mint, Bubblegum, and Pina Colada flavors.

Added 12/23/2008

QUIKcaps multi-purpose plastic barriers feature an elasticized edge to slip over a wide variety of equipment. They form a custom-fitting economical barrier over most operatory lights from handle to handle, headrests, handpiece controls, bracket tables and more. Stretches up to 12“ diameter. 400 per pack.

THey are not recommended for use on high temperature lights.

Added 12/15/2008

DENTRIX G4 practice management software offers more than 170 user-requested features. New features include:

Smart Upgrades
Update DENTRIX via the Internet.
Check for updates and install them when needed making updates easier for the office.
Update workstations to stay in sync with your server.

Patient Alerts
Alerts appear on all family members, eliminating the need to re-enter the same note on all family members' file.
Customizable patient alerts that suit the needs of the office.

Insurance Enhancements
Edit the amount of benefit used and the deductible applied for a patient without having to go through an open claim.
Save time when setting up insurance for new patients and when correcting older patients' benefits.
Set the "Signature on File for New Subscribers" as a default in the Office Manager.
Utilize "Release of Information and Assignment of Benefits" for both Dental and Medical insurances globally.

Ledger Enhancements
Search payments from within the Ledger with filters like Check Information, Insurance Carrier, Payment Type, Date, Amount, and Guarantor Enhancements that simplify splitting a payment and posting adjustments which will decrease payment errors for the office.

Chart and Treatment Planner Enhancements
Customizable Procedure Buttons and Button Sets allow the chart to be personalized for specific individuals.
Treatment Plan Consent Forms can now be viewed in the Document Center, saving the form if a case is deleted.
Improved user interface and integration of the Presenter player and the GURU interactive patient education player.

Added 12/05/2008

The Solaris™ LED light source from PeriOptix uses the latest LED technology that produces amazing brightness in a completely portable light. The small power pack weighs only 6.6 ounces and uses inexpensive, state-of-the-art Lithium Ion cells that can be quickly and easily recharged. The Solaris portable LED can be attached to any loupe system or worn on the Freedom™ headband.

• Highest intensity of any portable headlamp (80,000 Lux @ 14 inches)
• Pure white light for true color rendition
• LED lamp virtually never needs replacement
• Innovative power pack design with external battery cells for quick changing
• State-of-the-art Li Ion batteries (2 included)
• 4.5 hours of use on a single charge
• Variable light intensity control
• Attaches to all loupes or the Freedom™ headband
• Solid state circuitry keeps light constantly bright throughout the day
• Weighs only 0.7 ounces for unequaled comfort
• Quick charger- 90% charge in 90 minutes

Added 12/05/2008

The Nikon D90 features a small resolution bump (12.3 MP vs 10.2MP), a large, high-resolution LCD screen (3.0in vs 2.5in), Live View (use the LCD as a viewfinder), and sensor cleaning system, Additionally, it offers the ability to shoot HD quality (720p) video clips, useful for creating videos of procedures through microscopes.

The LCD screen grows from 2.5 inches to 3 inches and the LCD resolution increases from 230,000 pixels to 920,000 pixels.

PhotoMed offers the D90 as a complete clinical camera system. For dental photography, the Nikon D90 is available with two lens choices and two flash choices:
- the Sigma 105mm Macro Lens or the Nikon 105mm VR Macro Lens and
- the Sigma EM-140 Macro Flash or the Nikon R1 Macro Flash.
If you choose the Nikon R1 Macro flash, you should also check out our R1 Dual Point Flash Bracket for the R1 flash.

Complete systems (camera, lens and flash) also include a 1GB memory card, USB memory card reader and a professional grade hard case. The case is designed to hold the camera completely assembled and well protected.

The complete camera system is pre-assembled and tested. It is shipped in the professional hard case with custom PhotoMed instructions for clinical use. The complete system also includes unlimited telephone/email technical support and loan equipment support if anything ever needs repair.

Added 12/04/2008

One Spot Portable Procedure Headlight is a 1/2-oz (15 g) spotlight can be affixed to all glasses or loupes, or can be ordered on their own spectacle frame. The exceptionally lightweight, battery powered light produces 12,000 lux at 35 cm distance. Its LED light source provides 100,000 hours of illumination.

The feather-light recharge unit is the size of a matchbox and can be carried in a belt holster or in a shirt pocket.

Added 12/04/2008

Compatible with all manufacturers' digital x-ray phosphor plates, Deluxe Safe'n'Sure Envelopes feature a transparent side and easy-tear opening along their short side for simple positioning, streamlined workflow, and easy plate loading. They are constructed of soft vinyl with rounded corners for patient comfort. Sizes 0, 1, 2, and 3 are available in quantities of 300.

Added 12/04/2008

Both Identic dust-free alginate impression material and KromaFaze dust-free color-changing alginate impression material now are offered in packaging that incorporates a pre-measured volume of alginate for a single impression along with a water measure integrated as part of the package, eliminating the canister, scoop and water vial. The Singles packaging is convenient, easy to use and ensures consistent mixes every time.

Added 12/04/2008

The VersaWave Specialty Er:Yag all-tissue laser combines functional VersaWave technology and user defined features.

Applications include:

• Sucular debridment and removal of diseased tissue
• Osseous recontouring, grafting, etc.
• Major soft tissue removal and modification
• Implant site preparation and maintenance
• Smile line procedures including closed flap crown lengthening with predictable soft tissue modification
• Abfractions, under crown caries and more
• Laser assisted canal debridement and preparation
• Apicoectomy exposure and treatment
• Minimally invasive cavity preparation
• Gingivectomies
• Operculatomies
• Tissue removal and more...

• Precision laser fiber tip and ergonomic design handpiece design deliver consistant performance for truly exceptional surgical results.
• An intuitive control panel with LED readout and procedure specific presets make setup and on-the fly adjustment safe and easy
• Easy to access integrated Trutest® fiber calibration port ensures consistent output power for consistent results.

Added 11/19/2008

Specifically formulated for zirconia and alumina porcelains, ResiCem dual cure universal resin cement combines innovative adhesive and composite resin technologies. Its physical properties are compatible with all types of framework and restorative materials.

ResiCem offers predicatable zirconia bonding with AZ Primer. Exclusively developed for modern materials such as zirconia and alumina, AZ Primer ensures outstanding bonding values between the restoration and the hard tooth structure. Achieving bond strength of up to 20 MPa, ResiCem allows you to achieve results with zirconia comparable to non-zirconia materials.

Available in a translucent shade, ResiCem offers excellent shade stability with minimal variation for long-lasting aesthetics. ResiCem’s easy to clean up formula with ideal flowability and viscosity ensures simple application. Its stability allows excess material to be easily removed without smearing or sticking.

ResiCem can be expanded to become an all-purpose bonding system with the supplementary components that have been adapted to suit each class of materials. Use the Porcelain Primer for sintered and pressed porcelains and laboratory made composite restorations. ML Primer ensures secure bonding of precious and non-precious alloys.

ResiCem features a proprietary automix syringe for efficient mixing and loading. With a short automix tip, ResiCem minimizes material waste and ensures easy and accurate mixing of the base and catalyst.

Added 11/19/2008

The “Exclusive” Rear Cabinet from Sirona by Kappler is part of the “Exclusive” line of operatory furniture designed to provide ergonomic functions and traditional features at a competitive price.

The “Exclusive” Rear Cabinet comes with sliding work surfaces for both dentist and assistant, accommodating both left- and right-handed practitioners. Suitable for two- and four-handed dentistry, it allows various organization methods, including tub and tray systems. The “Exclusive” Rear Cabinet permits the incorporation of a CPU in the upper section, electrical outlets, flat-screen monitor, USB outlets and any required peripheral equipment. This allows for the easy integration of new technology and high-quality instrumentation.

Added 11/12/2008

Clear Fusion Hybrid Retainers are wireless, "invisible" appliances suitable for long-term retention following conventional or aligner orthodontic treatment. They can be custom made from models in different transparent colors or crystal clear. The appliance is designed to combine the comfort and esthetics of invisible retainers and the strength and effectiveness of Hawley-type retainers.

Added 11/07/2008

CAESY Enterprise 7.0 is the newest version of server-based patient education software for both operatories and the reception area. It includes more than 80 new and updated presentations , one which profiles Full Mouth Debridement and Prophylaxis, and others, including:

• Sedation Options in Pediatric Dentistry
• Invisible Braces presentation in the Orthodontics section
• Thin Veneers video in the Esthetic Dentistry section
• Nine new topics in Dentures
• Oral Conditions section, including a Frenectomy segment
• Hard and Soft Tissue Lasers in the Technology section
• Digital X-ray, Pre-Meds and Bitewing Digital modules in the Initial Visit presentation

All CAESY presentations are also available in Spanish, and seamlessly integrate with Windows Vista, XP and 2000 operating systems.

Added 10/24/2008

Requiring no contract fees, the iPAGER easy-to-use communications device fits comfortably on a belt or desk top.

It is completely programmable for all members of the dental team in the practice. For example, if a specific staff member is needed in exam room #3 to take a x-ray, simply scroll through the staff list for the desired staff member, enter the room number, enter the action needed, and hit “OK”. The page is sent within one second. The staff member has the option to receive the page silently, vibrating, audibility, or a combination.

Other conveniences include a countdown timer. When not in use, the device shows the current time. Additionally, the iPager with Intel-i-page automatically learns individuals' paging habits and presents the most frequently paged staff member.

The iPager saves time, by minimizing the number of necessary thumb strokes. The iPager ‘s two-way communication gives the user flexibility to send and receive messages from anywhere in the office. This wireless system does not use any satellites, cell phones, computers, or wall mounted units. Every office has its own interoffice network.

The iPager is FCC approved and operates safely in the office environment.

Other unique features include rechargeable batteries with a docking station for recharging, one hand operation, a belt clip that can be used as a desktop stand, and an Emergency Page feature that allows the user to make an Emergency Page by just pressing one button. Each iPager can be programmed with your own unique acronym or initials.

With a range that covers most size offices, the iPager can be setup and operating in one day, no installation fees. In the event an extended range is needed, an ipager unit can utilize a repeater function that is available. Any ipager unit can be made to be a repeater.

Added 10/23/2008

The Xpaper PDF Digital Writing Kit creates and captures written materials electronically. It is particularly suitable for Patient Registration,Patient History Forms, Laboratory Forms, Patient Charts, and Insurance Authorizations.

The system, priced at $399.00, naturally records handwriting on any document or form, instantly creates searchable PDFs upon docking and automatically controls where the information will be sent, stored, managed or processed. It works with documents printed from any Windows application including desktop PC software as well as Internet-enabled applications. Digital copies are created in the common PDF format, so they are easily used with almost any information system.

The Xpaper PDF Digital Writing Kit includes a digital pen based on Anoto digital pen and paper technology, the Xpaper PDF Print Driver, Xpaper Manager and the PaperView Assistant.

Xpaper PDF is easily configured for networked environments. Documents can be printed on any computer, written upon with multiple pens and then docked at any other computer. Handwriting is automatically updated on the digital copies so it always matches the physical paper. Additionally, documents can be configured at print time to automatically route to certain locations via email or file storage. Upon docking of the pen, users can automatically trigger applications to manage the information.

Added 10/21/2008

SecureDentalForms.com is designed to enable dental practices to transition to a paper-free environment. SecureDentalForms enables patients to fill out necessary forms, from new patient registration all the way to medical and prescription history, in the convenience and privacy of their homes or offices. These forms are customizable to fit the dental practice’s philosophy and branding. This information can be used stand-alone or bridged/integrated with existing practice management software.

SecureDentalForms.com is safe and secure. All patient information is password protected. All transmissions that include patient information are encrypted. SDF servers are positioned in a hardened data center.

In addition to online forms processing, The Virtual Practice Assistant enables the dental practice to utilize one software solution that will provide online appointment confirmation, recall reminders, marketing solutions, and more. SecureDentalForms.com has extensive alerting and reporting features. The alerts will notify the patient of any necessary documentation that needs to be finished or updated prior to upcoming appointments. This not only ensures up-to-date and accurate information from your patients; it also significantly reduces the burden of front office staff.

The Virtual Practice Assistant will help the administrative staff manage a variety of items, from medical and prescription updates to annual insurance updates, which need completion prior to the patient’s dental visit.

Added 10/21/2008

Formulated specifically for multi-unit impressions where more time is needed, Aquasil Ultra Xtra Smart Wetting impression material offers a 1 minute, 45 second intraoral working time to syringe wash material and a fast mouth removal time of 5 minutes 30 seconds. The mint-flavored material is described as exceptionally accurate and strong.The system combines a syringable light-body wash with a medium body tray material.

Added 10/20/2008

The GENTLEray 980 Premium water-cooled, micro-pulsed diode laser features GENTLEpulse Technology for a high level of soft tissue precision. It reduces thermal stress and virtually eliminates tissue charring and allows for minimal post-operative discomfort.

Other features include:

Higher Peak Powers – fast cutting results in less treatment time for doctor and patient
Water Cooling Handpiece - provides maximum cooling and irrigation to tissue, minimal post op discomfort
Variable Pulse - further refinement of energy to tissue
Sterilizable Fiber – multiuse without loss of laser energy to tip
Color Touch Screen – clearly defines procedures, easy to read at a glance and can be touched with a wet glove
On-board Tutorials – preset with 28 procedures, allows the operator to use the laser with confidence

The small, portable diode laser can be used for a wide range of surgical, antibacterial and laser whitening procedures. It carries a 2-year standard warranty.

Added 10/14/2008

GENTLEmini LUX 4500B high speed handpiece. The GENTLEmini LUX 4500B is designed to complement the GENTLEsilence LUX 6500B, only with a smaller head to further address the issues of patients who have difficulty opening their mouth wide for full oral access. The GENTLEmini operates at a quiet 59dB and offers 17 watts of power. The miniature head and KaVo’s patented handpiece knee angle combination provides improved access to difficult to reach areas. The three-port water spray ensures complete cooling of the bur. The durable hygienic Plasmatec coating improves tactile feedback and user comfort. The GENTLEmini LUX 4500B features KaVo’s cellular optic glass rod with a 5-year warranty on the rod. KaVo’s automatic drive air adjustment extends turbine life. The GENTLEmini fits onto any existing manufacturer’s fiber optic tubing with the MULTIflex quick connect coupler. When maintained with KaVo’s QUATTROcare Automatic Handpiece Maintenance System, the GENTLEmini LUX 4500B features a 2.5-year warranty. The standard warranty is 2 years.

Added 10/14/2008

EXA’lence Vinyl PolyEther Silicone (VPES) impression material is formulated to combine the properties of polyether impression and vinyl-polysiloxane silicone materials. EXA’lence is intrinsically hydrophilic with optimal flow and high tear strength for predictable performance under any clinical environment. It offers easy handling and maximized patient comfort.

Added 10/13/2008

CAESY DVD 2009 is the latest version of patient education software for operatories and consult rooms to explain diagnoses, procedures, alternatives and post-op instructions. CAESY DVD 2009 contains more than 25 new and updated presentations.

With 23 updated presentations, CAESY DVD 2009 now contains a more comprehensive Hygiene section with new modules on both Full Mouth Debridement and Prophylaxis.

In addition, the CEREC® CAD/CAM presentation has been updated with an informational video of the CEREC MC XL milling unit, and the Sealants feature has also been modified.

A new presentation to CAESY DVD 2009 is a Pediatric Dentistry segment featured on its own DVD, resourceful for educating parents on their children’s procedures. Additional new segments profile Perio Maintenance, Nitrous Oxide, and Sedation Dentistry, a topic about which many patients are currently seeking more information.

Added 10/10/2008

Philips Lumileds announced today that Gnatus has released a LUXEON-based operatory light that incorporates solid-state lighting technology. The Gnatus Dental Lamp LED Plus overcomes the inconveniences associated with conventional halogen models, including short bulb life, high power usage and spillover light.

Benefits of the light include:

• Exceptional brightness
• Exceptionally long life
• Significant reduction in power consumption
• True white light, improving diagnosis and shade matching
• Reduced heat output
• No peripheral light shining in patients’ eyes
• Small, sleek design enabled by eliminating the need for large reflector

The illumination from LUXEON LEDs also has less effect on curing light resins, giving dentists more time to do restorative work before the resins harden.

Added 10/10/2008

The Oralase low level laser device is engineered to rapidly and simply provide drug-free solution to reduce or eliminate pain and accelerate soft and hard tissue repair. The ergonomically designed portable Oralase provide low-level laser therapy (LLLT) to effectively control pain and decrease swelling from invasive dental procedures as well as stimulate healing.

LLLT uses a specific type of light to penetrate the skin's surface and underlying tissues to stimulate the body's natural repair processes. The result is faster healing and reduced pain, swelling and inflammation.

The lightweight ergonomically designed hand-held unit has a built-in rechargeable Lithium-Ion battery. It incorporates a GaAlAs 200mW infrared laser diode with visible LED guide light.

Added 10/06/2008

The Silamat S6 is a universal mixing device for amalgam, glass ionomer cements, and other pre-dosed dental materials in capsules and injection capsules. The unit combines functionality with a sleek and attractive appearance.

Its figure-eight mixing pattern and rotation speed of 4,500 rpm contribute to reliable and homogeneous mixing results. Its rounded shape and removable cover simplify cleaning.

The Silamat S6 can be used to mix various sizes and shapes of mixing and injection capsules, including those that are too large for conventional mixing devices. The capsules are loaded from above with one hand movement, after which the desired mixing time is set and the process started.

Added 10/06/2008

Silginat alginate alternative is a medium-bodied viscosity, polyvinyl siloxane impression material suitable for a variety of indications such as: anatomical models, opposing models, fabrication of temporary crown and bridges, fabricating simple removable prosthetic restorations, orthodontic appliances, splints and case study models, or for most purposes where an alginate could be used.

Silginat® was designed with a low-tear resistance to avoid dislodging restorations or orthodontic appliance inadvertently. The material also has a high dimensional stability so model impressions can be kept for weeks and poured multiple times. Silginat is also highly thixotropic and flows properly under pressure.

Silginat is available in two delivery systems – 362-mL foil bags for Kettenbach’s Plug & Press automatic dispenser (5:1 ratio); and 38-mL cartridges (1:1 ratio) with an optimal volume for a single full-arch or two quadrant impressions. The total set time for Silginat, when dispensed in cartridges, is 2 minutes, 30 seconds. When Silginat is dispensed in foil bags, it has a total set time of 3 minutes.

Added 10/06/2008

ADSTRA Charting Treatment Planning and Charting Software is now available as a stand-alone, after more than six years of being available only as a module (add-on) of ADSTRA’s practice management software. The Charting program integrates seamlessly with ADSTRA CLAIMS PLUS™ free management software program, which allows users to submit billing information electronically to Emdeon (formerly WebMD).

The comprehensive easy-to-use software program allows users to create and manage odontograms. Dental charts can be created for examinations, for completed treatment, and for planned treatment. There are four views of the chart: maxillary, mandibular, buccal, and palatal-lingual. The charting tools are grouped by type: general, periodontal, restorative, and endodontic. Multiple charts can be opened at the same time and pockets and recessions are represented graphically. A number of reports—or the whole chart as it’s viewed—can be printed.

ADSTRA Charting offers an array of tools for charting tooth conditions such as missing teeth, un-erupted teeth, partially erupted teeth, tooth rotation, impacted teeth, drifted, tilted, extruded, submerged, decalcification, hypercalcification, loose contact, open contact, root canal treatment, apical area, retrograde filling, pins, posts, root caries, complete crown, 3/4 crown, extraction needed, sealants, veneers, cavities, fillings, and many more. Users can set their own preferences for general chart, periodontal chart, restoration materials, and the connection between procedures and tools. Users can also define exam templates and incorporate them into the patient’s chart. Extra-oral examination and occlusal examination are built-in features.

The program also includes the ability to input, store, and review measurements for periodontal readings. Users can measure and enter gingival recession and pocket depths, and chart bleeding, suppuration, furcation, blunted papilla, cratered papilla, erosion, attrition, abrasion, and mobility. For charting plaque, a special surface map appears. Users can compare exams for values or changes in pockets or recessions, and calculate indices.

Added 10/02/2008

Anatomically-shaped Fast Dams are designed to provide a superior means of maintaining a dry quadrant field. Continuous aspiration is achieved by means of 17 suction holes along the perimeter, eliminating the need to change out saturated cotton balls while retracting the cheek and tongue.

Fast Dams are also suitable when applying sealants or when conventional rubber dam is too cumbersome.

Its collapse-proof plastic construction and molded anatomical shape stabilize the Fast Dam’s position. Fast Dams fit into all standard saliva ejector valves.

Added 10/01/2008

Futar Scan scannable, addition-curing polyvinyl siloxane bite registration material is formulated to provide high-quality optical registrations in current CAD/CAM systems in the dental office and laboratory. The use of powder is not required. The excellent optical properties guarantee high scanning quality and optimal image replication.

Futar Scan is extra hard (high final hardness of Shore D 35), extra fast (short working time of only 15 sec.) and can be easily trimmed with a scalpel.

Work time 15 sec. Set time 45 sec. Total time 1 min.

Added 09/30/2008

Futar D Slow is an extremely hard, addition-curing polyvinyl siloxane with 90 sec. total working time. Higher measuring range, Shore D 43. This decelerated curing time is suitable for time-consuming applications such as myofunctional bites, securing impression posts in position, custom tray peripheral extension, and laboratory processing techniques, among other uses.

The material exhibits a Shore D hardness of 43, and offers the 90 second working time along with a setting time of 3 minutes--a total time of 4-1/2 minutes.

Added 09/30/2008

Futar D Fast addition-curing bite registration material is an extremely hard, fast-setting polyvinyl siloxane formulation. final hardness is in a higher measuring range--Shore D 43. The material offers a working time of 15 seconds and a setting time of 45 seconds, for a total of 1 minute. It is supplied in a dual-cartridge delivery system.

Added 09/30/2008

Futar D addition-curing bite registration material is an extremely hard polyvinyl siloxane formulation. Its final hardness is in a higher measuring range--Shore D 43. The material offers a working time of 30 seconds and a setting time of 1 minute, 30 seconds, for a total of 2 minutes.

Futar D exhibits minimum resistance when the patient bites together, preventing any displacement while reproducing the occlusal surface detail accurately and curing with a high-lustre finish.

It is supplied in a dual-cartridge delivery system.

Added 09/30/2008

Futar addition-curing polyvinyl siloxane bite registration material is formlated to exhibit a very high final hardness of Shore A 90 . It offers a work time of 30 seconds and a set time of 1 minute, 30 seconds--a total time 2 minutes. It is supplied in a dual-cartridge delivery system.

Added 09/30/2008

Designed to create an integrated operatory solution, the Renaissance Collection of dental furniture incorporates an array of innovative features that improve in-procedure movements, enhance access to technology, and optimize storage to improve operatory ergonomics and efficiency.

Examples include drawer systems that slide into dentist’s or assistant’s reach and purposeful, ergonomic storage of barriers (jointly developed with Kerr TotalCare). Numerous electrical, USB and air/water connections are located where needed to improve in-procedure ergonomics. Soft-close drawers and doors eliminate harsh closing sounds and thus contribute to a harmonious dental practice.

This series of premier dental furniture offers highly differentiated, beautiful aesthetics and state-of-the-art functionality--soft, rounded surfaces, accented lighting and high quality and craftsmanship.

Added 09/29/2008

Specially designed to help whiten teeth, the Sonicare HealthyWhite power sonic toothbrush features the proprietary Clean & White mode. Utilizing sonic technology, it switches back and forth between two cleaning frequencies producing alternate waves of speed that effectively remove coffee, tea, red wine and tobacco stains. HealthyWhite combines two minutes of cleaning and an extra 30 seconds of whitening power to help achieve good oral health while providing natural whitening benefits.

Added 09/29/2008

The Helios 3000 LED Operating Light features proprietary color mixing LED technology that delivers a precisely calibrated 3 inch x 6 inch light pattern for optimal illumination of the oral cavity.

Using advanced LED light technology, the Helios 3000 LED Operating Light provides benefits such as a NO-CURE composite setting, push button 5000° and 4200° Kelvin settings, multiple intensity options, precise shade matching capabilities and nearly zero radiant heat emission. The conservation of energy and illumination of LED’s provides an exceptionally long life expectancy. By reducing the amount of wattage used to power the Helios 3000, energy conservation of approximately 70% is accomplished. This conservation accounts for a significant amount of cost savings on an annualized basis.

Available in six mounting variations: Track, Ceiling, Cabinet, Wall, Post and Ellipse Mounted, the Pelton & Crane Helios 3000 LED Operating Light provides advanced positioning capabilities and enhanced ergonomics for precise and efficient illumination of the oral cavity. Additional features include:

• Long depth of field generated within 18 inch to 36 inch range (factory calibrated at 27 inch)
• Adjustable power sensor for automatic control of system on/off functions
• Forced air convection fan eliminates nearly all radiant heat
• 40°C temperature regulated LED’s for consistent light intensity output
• Approximately 70% less energy consumed vs. standard halogen operating lights
• Minimum 30,000 hour life expectancy (10 years)
• Smooth surfaces and handles for easy asepsis and disinfection
• Vibration and shock-resistant
• Dual membrane touch pads
• Third axis rotation
• Spring Flexion Technology – flex arm range of movement travels up to 40 ° above and below horizontal and up to 27 inch vertically
• Mounting variations include ceiling, wall, cabinet, track, PMU and ellipse
• One year warranty

Added 09/19/2008

Tri-Force Thermal heat-activated, nickel-titanium archwire has three pre-programmed forces. Gentle forces are programmed into the wire for moving light-rooted anterior teeth, moderate forces are provided for moving the heavier-rooted bicuspid region, and the heaviest forces are provided to move the strongest-rooted posterior/molar region.

Tri-Force Thermal is an optimal initial archwire that is capable of torquing, leveling and aligning simultaneously. It meets the demands that each section of the arch requires to move teeth in the most effective manner.

Available in natural arch shape and round, square and rectangular wire sizes with an etched center mark on uppers and lowers.

Added 09/17/2008

Requiring no cables, cords, or similar connections, the HEINE 3S LED UNPLUGGED HeadLight incorporates a rechargeable headband battery for unlimited mobility.

Weighing 6.3 ounces with balanced weight distribution, the compact headlight is exceptionally comfortable to wear. Features include:

• Exceptional brightness and 6,000 Kelvin color temperature
• Shadow-free coaxial illumination
• LED charge status indicator showing remaining operating time
• Can be charged by wall or plug-in transformer
• Direct operation possible while charging through the use of the mobile plug-in transformer.
• Charging time 2 hours.
• Operating time 2 hours.
• Intelligent charging system--Automatic changeover from operating to charging mode (in the wall unit).
• Top safety standards--Integrated charge and performance checks during operation. Lithium polymer technology (selected non-flammable materials).

Added 09/15/2008

Patterson EagleSoft Version 15.00 clinical and practice management software offers new and enhanced features are based on feedback from current Patterson EagleSoft users.

Patterson EagleSoft practice management software is now free to new users, and the imaging software may also be obtained at no cost with a qualifying digital technology purchase.

New to Patterson EagleSoft Version 15.00 is the ability to print CAESY patient education literature automatically during the patient walkout process after a service procedure code is entered. Built directly into Patterson EagleSoft and not requiring a separate CAESY system, this tool allows dental professionals to ensure that their patients have applicable information regarding post-op care recommendations before they leave the practice.

Additional Features of Patterson EagleSoft Version 15.00 include:

• View Production Goals—Users are able to view actual production numbers against production goals for each day in the Month-at-a-Glance calendar.
• OnSchedule Notes—This feature allows users to make notes within the practice schedule as they pertain to appointments, patient requests, and staff meetings and needs. Pertinent notes appear each day on the schedule.
• Insurance Changes—When employer or insurance information is modified, a note appears in the System Activity Log to record what was changed, when, and by whom for the software user’s records.
• Chart Update—Users can quickly and easily track the status of patient treatments by color-coding the chart to represent “walkout” and “rejected” services.
• Lab Tracking—Practices can track cases sent to the lab and take notes with an expanded description field. An AutoNote button has also been added for additional convenience.

Added 09/10/2008

GC Ortho Gel Conditioner is s 20% polyacrylic acid designed to mildly condition enamel prior to application of Fuji Ortho LC Automix (brackets) or GC Fuji Ortho Band LC Automix dual cured resin reinforced glass ionomer cements . GC Ortho Conditioner is available in a syringe delivery with brush tips for easy application.

Added 09/05/2008

Fuji Ortho LC and Fuji Ortho Band LC are dual cured resin reinforced glass ionomer cements available in easy to use automix paste paks. Both release fluoride long term to help prevent white spot lesions.

The cements offer moisture tolerant adhesion for easier bonding, a long working time for stress free placement, retention strength comparable to resin, and easy clean up.

Added 09/05/2008

Logic Line orthodontic brackets combine low-friction biomechanics with the reliability and ease of use of twin brackets. The possibility of using either Slide low-friction or conventional ligatures creates a versatile therapeutic option. Logic Line brackets are available both metal and aesthetic in the Roth and Step prescriptions.

Logic Line brackets are designed to be used with Slide low friction ligatures during the initial alignment and levelling phases of treatment. Additionally, due to large mesiodistal dimensions and the twin tie-wings, Logic Line brackets can be used with conventional ligatures, for maximum biomechanical control during the appropriate phases of therapy.

Further options are available to the clinician seeking optimum anchorage and biomechanics. It is now possible to use low and high friction in selected areas of the arch, upper and lower, or independently.

Added 09/02/2008

Discovery SL self-ligating orthodontic brackets are designed to provide effective treatment, easy and reliable handling, and very high degree of treatment comfort. They combine maximum function with minimum size for an effective & aesthetic treatment option.

The CAD-manufactured brackets incorporate a simple, robust closure mechanism for easy, quick closure as well as easier opening. The design includes an integrated friction brake that prevents the cover closing accidentally when changing the arch. The computer-aided design of the cover also guarantees that the closure mechanism has the required reliability.

The minimal size, extra-smooth surfaces and closed design of Discovery SL brackets provide the patient with outstanding comfort. These features combined with the shorter appointment times and more gentle treatment forces ensure a high degree of patient acceptance and comfort.

The brackets are exceptionally small in both surface area and in low profile volume.

Added 09/02/2008

Written, directed, and narrated by Dr. Stanley Malamed, 2-DVD Emergency Medicine in the Dental Office interactive training program presents 14 potential emergency situations that arise in dental offices and demonstrates how to manage them. The program incorporates high-definition 3D animations and compelling dramatizations. Among the topics covered are cardiac arrest, seizure, and allergic reactions. The program is suitable for in-office or take-home instruction and qualifies the participant for 7 hours of continuing education credit.

Added 08/25/2008

The E-Prop an oral mouth prop is designed to hold a disposable evacuation tip. It is completely adjustable and can be positioned to eliminate liquids from pooling in the patient’s mouth.

The E-Prop ™ was developed to save time and money by providing a cost-effective solution to traditional hand-held liquid evacuation. The patent pending design allows for a standard disposable evacuation tip to be placed in the mouth prop reducing the need for labor intensive hand held suction. In addition to making the patient more comfortable, it allows the dental technician to better assist the dentist.

The E-Prop is an FDA registered Class 1 Medical Device and is made using state of the art FDA approved plastics that contain no latex. The E-Prop ™ is fully autoclavable and will stand repeated use.

Added 08/22/2008

Exceptionally compact and ergonomic, the SuniCam II offers 105 degrees of viewing access to optimal diagnostics. It incorporates an aspheric lens to eliminate distortion. Its LED illumination enhances image quality. The sleek design provides patient and user comfort.

Added 08/21/2008

SunSparkle dental appliance cleaning system cleans and disinfects dentures, retainers and other dental appliances. It combines the power of a concentrated disinfecting cleaner with a pre-timed, battery-powered, ultrasonic bath. This combination kills bacteria and removes stains safely and effectively.

Advantages include:

COUNTER-FIT multipurpose replication silicone provide exact replication, superior to alginate, for all the procedures for which you would normally use alginate. COUNTER-FIT sets in about the same time as alginate, is thixotropic so it won't induce gagging, and it provides outstanding replication of detail.

COUNTER-FIT remains stable for years, is easily disinfected, and can be poured immediately or when convenient, as well as multiple times.

COUNTER-FIT mixes quickly and without variation, in 50ml automix cartridges, reducing procedure time and eliminating clean up! COUNTER-FIT can also be purchased in economy priced 875ml tubes (base and catalyst), lowering the cost per use.

Applications include:

• Counter Arch impressions
• Bleaching tray & athletic mouthguard fabrication
• Large case temporary matrix fabrication
• Study models
• Orthodontic models, appliances, and retainers
• Matrix material for long span provisional crown and bridge restorations
• All alginate-type impressions

Benefits include:

• Thixotropic consistency will not induce patient gagging
• Quick-mixing and without variation
• No powders, mixing bowls, preparation or clean up
• Highly stable allowing for immediate and multiple pours
• Can easily be disinfected

Added 08/18/2008

Designed to maximize operator comfort, visibility, suction efficiency, the Angle-Ease Adjustable HVE Tip has 12 locking angle adjustment positions, allowing it to meet every treatment and operator requirement:

Superior Ergonomics and Operator Comfort - adjusts from a straight bayonet position to a 90ş angle to easily reach any quadrant. Lowers fatigue and eases strain on the wrist by reducing hose tension and drag.

Improved Visibility - offset approach keeps hands clear of the working field.

Increased Efficiency - allows hose to slope downward from the valve for maximum suction efficiency.

Full Retraction - rigid construction retracts cheeks just like standard tips.

Reversible Design - accommodates either right or left-sided assisting.

Fits all standard HVE valves. Single-use white plastic construction. 50 tips per package. Patent pending.

Added 08/18/2008

An extension of the Instrument Management System (IMS), Signature Series Procedure Tubs serve as portable operatory drawers to organize, store, and transport disposable materials to and from the storage/sterilization area and the operatory. This standardization eliminates time-consuming tray preparation.

Color-coded to match IMS Cassette rail colors, these customizable tubs manage consumable materials by procedure and provide esthetic integration and streamlined instrument management.

Signature Series Tubs contain Microban that inhibits the growth of microorganisms that can cause staining, odors, and product degradation. The tubs also feature locking covers to protect the materials during storage and transportation.

Available as a Complete Tub with one part code (including a tub and all necessary accessories) or can be customized to meet the office’s individual needs with a wide range of accessories. Tubs are available in 8 colors.

Added 08/14/2008

Masel’s Doublegard ready-to-wear mouthguard is designed specifically for active children and adults who wear braces.

The mouthguard's spring-loaded hinge provides maximum protection, keeps the mouthguard in place, and allows natural jaw movement for optimal comfort. This stable fit allows easy breathing and prevents dislodge, even upon impact.

Contoured to follow the natural anatomy of each arch, Doublegard is fabricated from latex-free material that is durable yet flexible and conforms to the NCAA guidelines for colored mouthguards.

Two new color assortments, sunburst and metallic, are now available presenting an even more expansive color selection. Doublegard is available in junior and adult sizes, with and without a strap.

Added 08/14/2008

The compact Canon Rebel XSi is a 12.2 Mp "SLR" camera providing clear, true-color images with a high resolution of 4572 X 2848. Its 3-inch LCD rear screen can be used for live-action viewing similar to point-and-shoot systems; the traditional eye-level viewfinder also can be used.

Other features include:

• Secure digital memory cards
• Lithium-ion battery supplied with an external re-charger, offering a full recharge in 90 minutes
The 105-mm macro lens focuses from almost 2X to infinity in either manual or auto-focus mode. The 105-mm focal length provides a comfortable working distance when taking 1:1 views of posterior areas; it also allows distortion-free focus for full-face/profile views. The lens has the standard series of views for ready reference.
• The f:2.8 lens ensures bright, easily-visible image in the viewfinder.
• A small battery-operated ringlight is TTL-dedicated and yields exceptional color and illumination for all views.
• The camera is supplied with pre-set functions and dental-specific instructions.
  Unlimited, toll-free telephone support is provided.
• A 1-GB SD card, USB card reader, battery recharger kit, stainless-steel mirror, retractors, fitted hard case, and imaging/printing software included in package.

Added 08/14/2008

Developed to improve practice workflow and efficiency, DEXIS Integrator for DENTRIX provides seamless integration between DEXIS Digital X-ray and DENTRIX Practice Management Software.

It features the DEXIS Image Pane allows viewing and accessing of all available images; specific images can be quickly and easily selected for administrative and clinical functions.

DEXIS Integrator for DENTRIX offers immediate one-click access to patient images, to DEXIS imaging software, and to image acquisition--all from within the patient's chart. Additionally, it provides a simple process for attaching images for referrals, lab cases, and e-claims.

Other features include the ability to enlarge an image up to full-screen and apply ClearVu image enhancement and annotations from within the chart; image indicators on the chart that alert the clinician of pre-existing images for each tooth; and full integration with Henry Schein's GURU patient education system.

Added 08/06/2008

SOFRELINER® MS/S is a silicone based chairside soft denture reline material. Sofreliner® comes in 2 variations: Sofreliner® S (Soft) and Sofreliner® MS (Medium Soft). Sofreliner® S offers greater comfort with extremely soft texture, and Sofreliner® MS offers durability and higher tear and stain resistance. Sofreliner® cures in 5 minutes 30 seconds intraorally without odor, taste or chemical irritations. Silicone Remover (sold separately) is now available, which removes silicone denture liner from the acrylic denture easily.

Added 08/06/2008

SOFRELINER TOUGH® is an addition-cured silicone chairside soft lining material for dentures. Sofreliner Tough® has no odor, taste and chemical irritations. It offers a high tear resistance, high stain resistance and outstanding adhesion to the denture base. Sofreliner Tough® is designed to be used when durability is the primary concern. The paste cures in 5 minutes intraorally, and the kit comes with 2 different finishing points (Shape adjusting point & Finishing point). The Silicone Remover (sold separately) is now available, which removes silicone denture liner from the acrylic denture easily.

Added 08/05/2008

An upgraded version of the Delta XL sterilizer, the Delta Q features closed-door drying, which prevents the interruption of the full Sterilization process by allowing instruments to dry completely in an enclosed, clean environment.

Other features include an ergonomic handle, a user- friendly touch pad, a long chamber depth that accommodate up to three large cassettes and three small cassettes per load, and an innovative PC cable that enables sterilization history to be downloaded directly a PC (eliminating the need for a printer).

The Delta Q offers a six months full replacement guarantee and three years parts warranty.

Added 08/04/2008

The Platypus orthodontic flossing device is designed specifically for patients with fixed orthodontic appliances, eliminating the need to thread floss under archwire for every tooth. orthodontic patient. With the Platypus, a patient can floss his or her mouth in one to two minutes.

The device is exceptionally easy to use by applying light pressure to tooth and sliding it beneath the wire. The other end is a pick-brush combo.

Added 08/04/2008

Grip-Rite anesthesia syringes have silicone-covered handles and wings (available in red, blue, and purple) for an improved grip, optimal control, and user comfort.

The syringe hubs are permanently affixed to the syringe, eliminating the need for removal to sterilize and the need for misplacement.

Standard and petite sizes are offered; the petite size's shortened harpoon rod simplifies aspiration for users with smaller hands.

Added 08/04/2008

The new Dine Wireless Digital Dental Cameras Systems allow immediate downloading of high resolution dental images from camera to computer hard drive without the need for any direct connection.

Users can be as far as 90 feet from their computer while taking pictures. Images are immediately sent from the camera’s memory card to a wireless receiver attached to the USB port of a computer.

All users need is a wireless internet router in their office and the wireless camera kit from Dine. Images are stored on the computer and available for instant viewing.

The wireless system is functional on Dine’s Digital SLR Dental System featured with Nikon d40, D60, D80, and D300 and Canon’s EOS Rebel XSI systems.

These kits include Dine’s Ring and Point Flash, 105mm lens with Dental Standardization guide as well as mirror, cheek retractors, and carrying case.

The wireless system is also available with Dine’s small format hand held Dine Digital Solution camera, a lightweight dental camera that is small enough to fit into the palm of a hand yet takes the full range of dental photography.

Wireless camera card and receiver is priced at $79.00. Complete packages of dental camera and wireless kit start at $895.00.

Added 07/30/2008

ACCUPAL is a cordless, compact, handheld device that effectively pre-conditions the oral tissue to receive virtually pain-free palatal or other intraoral dental injections.

ACCUPAL incorporates four known and proven pain-reducing theories into one economical, user-friendly device:

1. ACCUPAL incorporates the "Pain Gate" theory to energize the dental tissue in and around the site to be punctured by the needle.
2. ACCUPAL's ultrasonic tissue stimulation disrupts the tissue injection site to allow standard topical gel to pre-condition the injection site, thus further reducing the needle’s pain-producing effects.
3. ACCUPAL vibrates the needle at the injection site. The pain-reducing effects of direct needle vibration are well documented as having a positive effect on injection comfort.
4. ACCUPAL ensures that the clinician inserts the needle bevel at its narrowest point, which provides the most minimally invasive path possible and reduced tissue damage to deliver a consistently comfortable palatal injection.

The economical ACCUPAL is available online at www.accupal.com. The complete starter package, which includes the ACCUPAL cordless handpiece, 50 disposable tips, a patient education CD-ROM and a clinician training CD-ROM, is priced at $479.00 plus shipping and handling. Additional handpieces can be purchased at $179.00 + S&H and disposable tips are available for $99.00 + S&H for a package of 50, $189.95 + S&H for 100 and $279.95 + S&H for 150. Additional patient education and clinician training CD-ROMs are also available.

Added 07/25/2008

Designed by a physical therapist and spine specialist, the AnterioRest dental chair support device creates an ergonomic workstation to prevent and treat lower back injury. The concept of Back Support From the Front® applies research findings which suggest that anterior support is far more effective than posterior support in reducing muscle stress in an inclined position.

The AnterioRest attaches to the back of the patient chair and terminates in a small cushion against which the practitioner leans, thus freeing arms and hands for stress free manipulation of instruments. The supporting arms can be moved through a full range of motion, accommodating all treatment positions for right or left handed users. The optional dual mount installation attaches two AnterioRests to the back of the patient chair providing support for both the dentist and assistant during four-handed procedures. The AnterioRest has been instrumental in alleviating back, neck, and extremity pain, helping many users return to comfortable living and productivity.

Specs:

Length: 30” max. (mounting plate to pad)
Width: 7” or 9” (breadth of pad)
Height: 13” (upper arm to top of pad)
Weight: 10 lbs. (4 kg)
Pad: 5” x 7” oval or 3” x 9” rectangle
Materials: Powder Coated Steel and Aircraft Grade Aluminum, Synthetic Leather, Phenolic Polymer
Adjustments: Three pivoting joints allow the upper and lower arms and chest plate to swivel into virtually any confi guration. This enables the operator to place the chest pad into their preferred position. All joints are locked into place by one centrally located knob.
Lower Arm: 13” of horizontal extension
Upper Arm: 10” of vertical extension
Mounting: Secured to back of patient chair via specially designed mounting plate
Cleaning: Standard solution wipedown

Added 07/24/2008

The eView large x-ray viewer is 34-mm thick. It is light and portable enough to be mounted on a wall vertically or horizontally.

A clear and sharp image of any x-ray (single, panoramic or CT) displayed is the result of advance technology of even light that’s distributed throughout the panel as powerful as 6000 candles. If offers a 10,000-hour lamp life, powered by 115V.

Viewer panel size 600mm x 420mm

Viewer full size 700mm X 520mm.

Added 07/14/2008

Slim, compact, and available in five colors, the Einstein Stella wireless digital intraoral camera offers instant set up, with no wiring required. It features:

Auto Focus--There is no manual focus required. The camera instantly adjusts focus from a full arch to a single molar.
Brightness Adjustment-- With the touch of one button, the brightness can be easily adjusted depending on the application. The brightest setting is ideal to take the full arch image, and the level of brightness can be adjusted accordingly to the area of interest.
More Intense LED Light-- Einstein Stella is equipped with more intense LED lights than other Einstein series to bring out the clear image with more natural colors.
On-Board Memory-- It holds 15 images on its on board memory for instant review.
Finger-Tip Operation-- High quality images can be instantly captured and stored in the camera by a single click on the freeze button. Slide the button to review with patients.
Battery Level Indicator-- Einstein Stella indicates the remaining of battery level on the screen. You may keep your eyes on the battery level with this indicator knowing when to charge.
Comparison Mode-- Two-image comparison mode achieves more effective presentation on the spot. Displaying before and after images does not require a computer.

Added 07/11/2008

Wingers horizontal bitewing x-ray positioner has been improved. The new longer bitewing tab (+1.5cm) contains a small insertion slot to allow attachment of an integrated (single piece) x-ray, aimer ring and bar.

The new x-ray guide bar easily slides into the tab of the disposable bitewing and can be sterilized for re-use. The longer tab also allows for positive cheek retraction.

Comfortable for the patient, the positioner now allows clinicians to capture excellent images either using the bi-secting angle technique or as an aimed shot.

A Free aimer ring-guide bar will be included in every box of Wingers horizontal bitewings (Lg.) 088-124. The product is also made for the number 1 sensor (088-126). Samples are offered.

Added 07/11/2008

Designed specifically for the restorative general dentist, the Waterlase C100 all-tissue laser delivers Waterlase dentistry clinical procedures including cavity preparation with little or no anesthetic in many cases, early stage periodontal therapy and soft tissue procedures with more patient comfort compared to conventional instrumentation.

Priced to appeal to a broader cross section of dentists, the C100 laser combines industry-leading Waterlase YSGG technology with excellent reliability, clinician control, operating efficiency, and flexibility in tip and accessory selection.

While it offers a narrower scope of applications than Waterlase MD, it provides for an advanced level of clinical results and patient comfort in a wide range of hard and soft tissue procedures.

Added 07/11/2008

Preva Plus combines the features of high frequency dental x-ray with a high resolution digital sensor engineered directly through the x-ray arm. The system improves chair-side imaging workflow with the immediacy and convenience of an at-hand, always-ready digital sensor. Using the latest microprocessor technology and USB 2.0 flexibility, Progeny delivers a practical and user-friendly integration of x-ray and sensor.

Preva Plus eliminates having another cable in the operatory and concerns about possible drop damage or misplacement of sensors. The sensor is stored in a low profile holster directly on the arm for the most convenient possible access. A simple interconnect plug allows the user to switch quickly between sensor sizes or remove the sensor for cleaning.

Progeny’s Vision DX sensor provides immediate, detailed images via high speed USB connectivity to the operatory PC. Its rounded corner profile adds to patient comfort, while its robust construction and strain-relief cord provide durable, everyday diagnostic digital imaging.

Added 07/10/2008

The bluephase G2 cordless high-performance polymerization light is engineered to offer limitless LED curing. Suitable for all clinical situations, the LED unit can be used for the fast polymerization of all light-curing dental materials in the wavelength range of 380 nm to 515 nm.

Like halogen lights, the bluephase G2 achieves a broad light spectrum of 380 nm to 515 nm. With its proprietary Polywave LED, the bluephase G2 light is suitable for all light initiators and, therefore, its use is unrestricted.

Incorporating a virtually noiseless built-in cooling fan, the bluephase G2 light can be used for an unlimited period of time to cure all indications. For example, the bluephase G2 can be used for extensive cementation procedures involving multi-unit restorations without going into automatic shutdown to cool.

The light's cordless design--based on state-of-the-art, 60-minute capacity lithium polymer batteries--offers the ultimate in mobility. The light can be used wherever it is needed due to the Click & Cure function: the handpiece can be connected with the power cord of the charging base to enable continuous operation, even if the battery power runs out.

Other features of the bluephae G2 include high light intensity of 1,200 mW/cm2 for reduced curing times starting from 10 seconds, a 10-mm light probe for a larger curing area, and three available modes for maximum, deep, and stress-reduced polymerization. The unit also has seamless housing for optimum infection control, as well as an OLED color display for brilliant readout quality. Further, the innovative movement sensor ensures immediate readiness for operation.

Added 07/03/2008

CV SuperForce heat-activated, nickel-titanium archwire offers high tooth-moving forces similar to copper-niti wire, with superior resiliency.

At room temperature, the wire is consistently soft, simplifying ligation and increasing patient comfort. Highly responsive to chilling, the wire can be softened even further, so the most difficult cases can be ligated quickly and easily.

Featuring an etched center mark, the archwire is available in round, square and rectangular sizes in natural arch shape. CV Superforce™ is ideal for adult patients with significant crowding.

Added 07/02/2008

The all-in-one Compsite Whizard organizer is custom designed to hold syringe-delivered materials. It is made of autoclavable plastic with Microban antimicrobial coating.

Features:

• Stores and organizes composite materials
• Portable. Transports to central sterilization for disinfecting and restocking
• Simplifies inventory control
• Locking Cover keeps materials clean during storage and transportation
• Holds up to 40 syringe tubes
• Clip-on holder allows you to separate composite for use during procedure
• Long Tub Cup and Slide Tray provide additional organizational space
• Shade Label Sheet provides self-stick labels preprinted with composite shade for easy identification

Added 06/30/2008

The Technology and Lighting Center (TLC) is the only overhead multimedia display that allows patients to comfortably watch TV, intraoral camera or computer images, videos, or movies. Plus the integrated fiber optic dental light shines in the patient's mouth - not in the eyes, providing an unobstructed, glare-free, heat-free experience. It comprises:

A high-intensity dual-beam fiberoptic operating light that generates no heat and illuminates only the oral cavity
Ceiling track with LCD monitor bracket
Multimedia control center with built-in TV tuner and infrared remote control
Flat-panel high-resolution display with built-in speakers

The TLC System is designed to unclutter the operatory, and allows patients to relax and focus on the digital monitor, so that they rarely move their heads during treatment

Added 06/27/2008

Designed to control and manage orthodontic anchorage based on directional force mechanics, Abso Anchor Micro Implants are suitable for pre-surgical and pre-restorative tooth movement and may provide an alternative to surgery. Requiring no osseointegration, the micro implants have broad clinical application including:

• retraction of teeth
• molar uprighting
• molar distalizing
• midline correction
• protraction of the posterior teeth
• intrusion of anterior and posterior teeth
• correction of occlusal canting

With a small diameter of 1.2mm to 2.0mm, the micro implants are easily inserted into many previously unattainable areas of the maxilla and mandible. Ideal for both self-tapping and self-drilling driving methods, they are made from high quality titanium alloy, feature a variety of head types, and are compatible with all orthodontic systems including wire, ligatures, elastomers, and springs

Added 06/27/2008

The Twist latex-free disposable 90° reciprocating prophy angle is designed to eliminate spatter and heat.

Features:
• Unique, patented OSCILLATING MOTION
• Eliminates spatter of prophy paste, blood, saliva and other potential infectious matter
• Eliminates frictional heat – remains cool for increased patient comfort
• Allows you to maintain continuous contact and pressure on tooth surface for maximum stain removal
• Ergonomically superior – No more “lift and dab” technique
• Safe for use on gingival margins and exposed dentin
• Ideal for applying dental medicaments, and preparing teeth for etching and bleaching procedures
• Effective for orthodontic cases – use on and in between brackets, wires and bands

It comes in soft and firm cup styles and tapered and flat brush styles, in quantities of 100 angles.

Added 06/27/2008

CamSight’s Opti Intraoral Camera incorporates CCD technology and bright LED light to provide crisp, clean images. The Opti’s sleek design makes it highly maneuverable while its user-friendly approach and large depth of field make it practical and easy-to-use.

It has a USB interface, so dentists can easily plug the camera directly into any USB port on a computer or laptop. The Opti has a capture button right on the handpiece to conveniently capture images.

The Opti is capable of supporting the needs of any size dental practice and is available in different system packages. The Opti Intraoral Camera can be used with dentists’ existing software or can be purchased as a kit with CamSight's CDMi Intraoral Imaging Software.

Added 06/26/2008

Correct Plus Impression Materials are now available in the Mighty Mix Cartridge System for use in automated mixing machines like Pentamix. Designed to eliminate hand fatigue and streamline the impression taking process, Mighty Mix cartridges offer easy filling of viscous tray materials with the touch of a single button.

Correct Plus Mighty Mix Impression Materials are formulated to consistently provide highly accurate and detailed impressions. Containing nano-cone fillers and infused with palladium, Correct Plus Mighty Mix Impression Materials exhibit outstanding physical properties with minimized outgassing. The combination of versatile setting times and multiple viscosities make Correct Plus® Impression Material appropriate for fabricating crowns, bridges, inlays, onlays, veneers, and more.

Added 06/26/2008

The OptraGate lip and cheek retractor has been replaced by OptraGate "ExtraSoft" for added patient comfort and a gentle fit that minimizes pressure.

In addition to the optimization of the material quality, recesses to accommodate the upper and lower lip frenulum have been added to the inner ring. These modifications make OptraGate "ExtraSoft" even more comfortable to wear for patients over longer periods of time.

OptraGate "ExtraSoft" provides perioral retraction of the lips and cheeks and thus considerably enlarges the operating field. As a result, visibility and accessibility are significantly increased. In contrast to conventional, rigid lip and cheek retractors, the OptraGate "ExtraSoft" adapts to the individual oral situation because of its three-dimensional flexibility.

Added 06/24/2008

The iNterra Nightguard can be easily fabricated in the dental office in less than an hour. Benefits include:

• Less expensive than conventional nightguards
• Improved fit over laboratory nightguards
• Requires fewer adjustments
• Improved patient compliance
• One visit delivery, preferably in combination with other services

The nightguard is durable, wear resistant, esthetic, comfortable, and Methyl-Methacrylate-Monomer free. Its proprietary wedge shape allows for easier lateral excursions. Three individual tray sizes are available.

Added 06/24/2008

The Explorer magnifying video scope allows dentists to work in ergonomic comfort while looking at the monitor so they no longer have to perform procedures in a constant head down or bent over position. The Explorer replaces the need for loupes and reduces eye strain as well as neck and back pain.

The Explorer's built-in motorized lens system offers hands-free operation with simple control features such as a foot pedal. During a procedure, simply tap the foot pedal to zoom, focus, adjust brightness and capture still images.

Dentists can capture still images with just a click of the foot pedal, making visual documentation easily accessible to view with patients during case presentations for better communication. CDMe software features include Reverse Image, which flips mirror images to view as direct images; Still Digital Image Capture, Case Presentation and much more. The Explorer’s software can also be fully integrated with CamSight’s Digital X-Ray Imaging Software to view microscopic images and x-ray images on the same screen.

The Explorer™ has a bright LED light that can replace a conventional operatory light. It available in different configurations including floorstand (mobile), floor mount, track mount and ceiling mount.

The Explorer can be seamlessly integrated into any imaging software or computer system.

Added 06/24/2008

The Ana-Bel extraoral X-ray system utilizes the advanced features of a high frequency generator and fast scan times to reduce patient radiation exposure and produce superb digital Panoramic, TMJ and Maxillary Sinus images.

Standard Features:

• Panoramic (child, adult, orthoradial), 4 view lateral and 2 view frontal TMJ and maxillary sinus imaging
  
• Advanced system design enables ANA-BEL to produce radiographs with minimal interproximal overlap, for easier detection of carious lesions
  
• Sharp images can be obtained, even with mild patient positioning errors
  
• Simplified controls permit operator to select kV, mode, mA and exposure time
  
• Pushbutton controlled three-laser beam alignment system for correctly positioning patient mid-sagittal, frankfort and focal-trough planes
  Pushbutton controlled X-ray head height adjustment accommodates adults or children, both seated and standing 60-90kV, 2-12mA 0.5mm x 0.5mm focal spot
  
• Fast 7 second scan or 12 second scan time
  
• Rotational speed adjusts to reduce shadow effect on the image of the cervical vertebrae
• UL listed

Added 06/18/2008

CliniView XV is an easy-to-use software with powerful functions for digital image capturing, viewing, printing and storage. Included are a wide range of dental specific image enhancement tools. CliniView XV software supports image capture from Instrumentarium Dental’s Orthopantomograph® panoramic and Orthoceph® cephalometric units and SIGMA™ intraoral sensors. In addition, images can be imported or scanned from a wide range of other digital sources.

CliniView XV software’s advanced pre-processing algorithms optimize grayscale automatically and ensure excellent image quality without additional adjustments. The pre-processing algorithms can also be individually selected. Once acquired, the images can be transmitted to another workstation, an image archive, or sent by e-mail.

The system can also be integrated into other software applications, such as practice management or cephalometric analysis software. Twain integration and DICOM compatible software is also available.

A wide range of dental specific imaging enhancement tools such as: brightness, contrast, magnification, edge enhancement, noise reduction, sharpening, grayscale inversion, length and angle measurement and spot contrast enhancement.

Capturing an intraoral image series easy and fast with ready made or user defined templates

Added 06/17/2008

The Orthopantomograph® OP200 D Panoramic Dental X-Ray Machine digital unit includes a built-in reliable computer directly integrated into the system. No additional computer is required.

Features include:

• Animated patient positioning guide--
  The user can select patient positioning animations specific to each imaging program to ensure proper patient position.
  
• New smart compact handcontrol unit--
  The OP200 can be configured for the unit to be alternatively operated from a handcontrol instead of the SmartPad™.
  
• SmartNav™ Intelligent interactive navigator--
  The SmartNav™ software’s navigation program provides easy selection of imaging programs, arch sections, lateral scanning start position, and more. The user can easily set the desired OP200 user parameters in SmartNav™. All information is displayed and described in an understandable way.
  
• SmartPad™ full color high resolution touch screen--
  The SmartPad™ produces an easy to read and follow menu with simple and intuitive navigation through the operations.
  
• Instant dynamic help--
  This feature provides quick and convenient information related to the imaging programs, such as the purpose of the program selected. Complete user manuals are also included in SmartNav™.
• Advanced high frequency generator technology
• Small focal spot
  
• Clinically correct imaging geometry
  
• V-shaped X-ray beam
  
• Latest CCD technology
  
• Dose controlled Automatic Exposure Control (AEC)
  
• Automatic Spine Compensation (ASC)
  
• Accurate and stable 5 point patient positioning
• Open view of the patient
  
• Side positioning
  
• Three clear laser positioning lights
  
• Professional software tools
  
  

The Ortho Zone program provides special geometry to solve two common imaging problems: metal artefacts in the molar region of the condyle, and the need for an exceptionally wide anterior layer for patients with malocclusion.

Added 06/17/2008

Featuring a lightweight, ergonomic design that fits all hand sizes comfortably, the Vivid intraoral video camera features:

• Color-balanced, high-intensity 8-LED light for bright, true-color images
• Optimized depth of field for capturing close-ups and full-arch views without the need to manually change focus
• Comfort curve tip for easy full mouth surveys and optimal access to third molars
• USB 2.0 plug-and-play connection
• Spotlight tool for magnifying areas of interest
• A raised control button for instant feedback
• Capture button functions on release for stability
• 6.5-foot cable for extended reach (10- and 30-foot cables offered optionally)

Added 06/12/2008

From impression materials and composite accessories to x-ray film and exam gloves, a comprehensive selection of consumables and disposables are available directly from the supplier, iSmile Dental Products.

The direct selling model allows the company to offer economical prices on the entire line.

Among the items available are:

• Topical anesthetic gel
• Dispensing syringes
• Composite mixing wells, brushes
• Cotton rolls
• Barrier protection
• Saliva ejectors, tips, and traps
• Latex, nitrile, and vinyl gloves
• Impression materials, trays, and mixing bowls
• Ultrasonic cleaning units and infection control accessories
• Hand instruments
• Prophy paste and angles
• Fluoride and trays
• Bitewing tabs

iSmile products offer dental professionals an average savings of 15-20% compared to products sold by the large, national dental distributors.

Added 06/10/2008

DENTSPLY Rinn's Protective Radiography Aprons line now includes a lead-free Radiography Apron. The Soothe-Guard Air™ lead-free radiography apron features:

• Lead-free protective alloy lining that provides the protection of traditional lead with a fraction of the weight
• Easier placement for technicians
• Silky material that offers a relaxing and comforting feel for the patient
• Environmentally friendly – requires no special disposal procedure

Added 06/09/2008

The new 3D Accuitomo 80 offers a minute voxel size of 80 µ (micrometer). This super-fine voxel combined with the unit's 13 bit grayscale capability produces exceptional clarity with a very low effective dose.

It offers an expanded field of view, up to 80 x 80 mm.

The newly developed Zoom Reconstruction feature generates a high resolution image from the original scan without retaking the image. Morita's proprietary One Data Viewer program allows viewing of 3D images on any computer without special software.

FOV: 40 X H 40 mm, 60 X H 60 mm, 80 X H 80 mm.

Added 05/29/2008

The new Veraviewepocs 2D/3D offers digital 3D, panoramic, and cephalometric imaging options. Designed for versatility, the 2D model can be upgraded to 3D at a later date.

Easy to operate, the Multifunction Cassette enables both panoramic and 3D images to be taken without changing the cassette. For 3D positioning, simply click the region of interest on the panoramic view and the machine automatically re-adjusts. With exceptional clarity and low effective dose, plus super high resolution 3D images - 125 µ (micrometer) voxel - the Veraviewepocs 2D/3D delivers both clinician and patient benefits.
FOV: 40 x H 40 mm, 40 x H 80 mm, 80 x H 80 mm.

Added 05/29/2008

Featuring a curved design, the SOPRO 617 intra oral video camera provides a 105° angle of vision allowing a better exploration of the distal areas.

Features include:
The rounded shape and extremely reduced dimensions of the camera head improve patient comfort while preventing any trauma to the mouth.

The optical system is equipped with an aspheric lens that eliminates distortion and provides a more uniform quality image. Its optimized angle of view enables perfect visibility even into the hard-to-reach rear areas of the mouth.

The lighting system is composed of the latest generation LEDs that utilize condensers to focus the light and produce a very powerful beam:

• the image is luminous in any circumstance
• the emitted heat is reduced
• the entire image is uniformly illuminated (minimal shading).

One or four images can be frozen on the screen with a simple glide over the Sopro Touch. The sensitivity of this touch prevents blurry images .

Quick and safe connection through a strengthened “push-pull” socket which rotates to preserve product integrity and prevent any incorrect manipulations. It is offered as a stand-alone tabletop or wall-mounted unit or for integration into existing delivery units.

Added 05/23/2008

The new KODAK 9000C 3D Extraoral Imaging System enables orthodontic professionals to obtain low-dose, high-resolution, three-dimensional (3D) images, as well as panoramic and cephalometric images, at an affordable price. Featuring an attractive, user-friendly space-saving design and a full cranial lateral format, the system provides a broad range of image formats.

Features include:

• “One-shot” cephalometric technology maximizes productivity and image quality with image acquisition taking less than one second
• Panoramic image quality is optimized for the jaw morphology of the patient with the new variable focal trough feature
• Can capture a localized field of view 3D image, which can be limited to an impacted cuspid area, the roots of upper centrals or a temporomandibular joint (TMJ) area. The result...less radiation, high image quality and elimination of the need to capture and interpret unnecessary information
• Indicated for a wide range of cases such as micro-implants, wisdom teeth or impacted canines, and identification of mesiodens, and more
• Requires 20% less space than its predecessor, due to a 16-inch reduction in the length of the cephalometric module, reducing the need for room modifications
• Its motorized collimator delivers a broad range of cephalometric formats. It suits any orthodontic tracing need, from the full skull (12”x12”), to standard (8”x10”) and small field for lower dose exposures
• Generates lateral, frontal and submento-vertex images with constant reproducibility.
• To switch between panoramic, cephalometric and 3D modes, users simply select the program and the unit automatically switches between 3D and panoramic modes—without any manual interaction with the sensor. This eliminates the risk of sensor dropping

The KODAK 9000C 3D System will have limited availability during the summer of this year.

Added 05/15/2008

Intended for professional chairside use, Power Swabs® are convenient and versatile "liquid-filled" swabs designed to thoroughly clean and whiten teeth by removing tough, deep-seated enamel stains without traditional peroxide bleaches or abrasives. This product also dramatically reduces dentinal hypersensitivity associated with bleaching by employing 'wetting agents' that help to prevent 'dehydration-related' dental pain that is associated with many professional power whitening procedures.

The swabs feature "Foaming Action Cleaning Technology" FACT™ Technology which combines solvents, wetting agents, detergents, stain softeners and effervescents. Power Swabs® have shown the ability in independent clinical trials to dramatically reduce transient dentinal hypersensitivity and to also significantly enhance the results of many cosmetic dentistry procedures, such as vital tooth bleaching.

Because of their deep cleaning ability, Power Swabs® reduce the time needed for other whitening products to be effective.

Power Swabs™ are not the same as the “activator” swabs that are supplied with bleaching kits. They have a stain removal (cleaning) function, they are physiological pH 6.1 and they re-hydrate enamel to reduce sensitivity

Added 05/15/2008

The Dental SideKick Chairside Interactive Patient Education System is a responsive, bilingual user-friendly system featuring a wide range of topics (more than 150 clinical topics and 25 movies) in 10 major categories. It was developed to help the practitioner provide a quick, concise, accurate visual explanation of procedures and procedure alternatives. Compatible with existing PC networks and stand-alone computers, it is supplied on two easy-loading disks. A tutorial is included explaining program features and usage instructions.

Benefits

• Easy to navigate
• Any program can be printed and/or emailed
• Take-home CDs can be created
• Informed consent included
• Customizable with practice information, actual cases
• Material can be linked to any Web page

Added 05/13/2008

Designed to reduce muscular tension and fatigue, the Posiflex 6 Free Motion Dual Elbow Support System features free moving, height-adjustable elbow supports that follow your every move without restriction, yet provide total support and stability for your arms and shoulders. Compatible with any dental stool, the supports allowcomplete freedom of motion but without exertion in the neck, back and shoulder muscles. They are designed to cradle every user’s elbows with optimal firmness and comfort while allowing for complete mobility.

Features include:

• High-strength design with solid steel components.
• Clamps onto the riser of any dental stool in minutes with wrench provided.
• Heavy-duty ball joints with tension adjustment knobs allow elbow rests to swing horizontally with resistance adjustable from zero to fully fixed.
• Telescoping elbow height adjustment locks in place quickly and securely with simple thumb lever.
• Urethane gel pad construction features a non-slip texture that is easy to disinfect and fluid-proof.
• The supports are supplied with instructions and user’s guide and carry a 2-year manufacturer’s warranty.

Added 05/12/2008

Designed for low-light conditions, the DentalFoto digital camera system has a LoLite adapter to allow simple video or still-image documentation of oral cancers screenings performed with the VELscope system. The proprietary adapter connects directly to the VELscope eyepiece. The DentalFoto system includes the Canon Powershot A620 digital camera, a proprietary lens extension, 3 memory cards, a card reader, a battery charger and two sets of rechargeable AA batteries, an aluminum storage/carrying case, and a fully illustrated manual. The VELscope adapter is offered separately, priced at $137.

Added 05/12/2008

The Duomix dynamic mixing machine is designed for use with the Aquasil Ultra DECA cartridge for consistent mixes and rapid tray filling.

Features include:

• Automatic loading for easy set-up.
• Two forward speeds for tray materials and syringe filling.
• LED control panel indicating mixing readiness.
• Capacity indicator showing amount of material in the machine.
• Small footprint; can be wall mounted.
• Exceptional dispensing efficiency to minimize waste.

Added 05/12/2008

Providing protection for up to 6 months, Calm-it™ is glutaraldehyde-based desensitizer that functions by reacting/cross-linking with plasma proteins in dentinal fluid.

This simple, effective technique reduces hypersensitivity & eliminates discomfort from cervical erosion.

Benefits

• Fast pain control… Tubule penetration in seconds
• Compatibility with adhesives, cements, restoratives, amalgams, core build-up & temporary materials
• Low film thickness

Added 05/12/2008

Take 1® Advanced™ vinylpolysiloxane (VPS) impression material offers an optimum combination of physical properties: strength, elasticity, dimensional stability and the ability to register detail in any environment.

It comes in a wide selection of set times, delivery systems and consistencies. Features include:

• Outstanding tear strength and elongation. Strong, flexible material stretches around undercuts without tearing or distorting.
• Hydrophilic wash material. Displaces intraoral fluids to produce impressions with great detail and no voids or gaps.
• Excellent dimensional stability. Impression will not distort due to dimensional change or temporary deformation.
• Widest selection of viscosities, set times and delivery methods. Helps overcome common difficulties in impression taking, and matches doctor preference.

Added 05/05/2008

The next generation of its patient communication system, Demandforce D3 includes two-way appointment confirmations via text messaging. It provides break-through functionality which allows dental practices to more effectively attract new patients, retain existing patients, reduce no shows and measure patient satisfaction. D3 highlighted features include:

• Two-way Text Message Capabilities: Patients can choose to receive a text message to remind them of their upcoming appointment. Patients can reply with a “C” to automatically confirm their appointment in the Demandforce system.
• Intelligent Newsletters: Practices can now segment their patient base to send the right content, to the right patient at the right time thereby increasing per visit patient production.
• Digital Consultant: Demandforce D3 automatically displays critical practice health metrics against aggregate data across the Demandforce network to highlight areas for potential improvement.

Added 04/25/2008

KOMET USA's adhesive removing instruments are developed specifically for orthodontists to remove tough adhesive residue. They remove adhesive quickly, and special toothing prevents damaging the enamel.

At low contact pressure, the instruments operate with low vibration and achieve perfectly smooth surfaces while generating minimal heat; this due to innovative blade geometry.

Its twisted blades, made of durable tungsten carbide, are suited for precise reduction of soft materials and assure smooth operation providing maximum treatment comfort. To avoid the risk of damaging the gingiva, they are provided with smooth, non-cutting tips, and the safety chamfer at the head’s end eliminates the formation of grooves.

3 styles are available:

The tapered instrument is available for contra-angle and turbine handpieces. The H22ALGK is designed specifically for canines and long anterior teeth, and the egg-shape (H379AGK) instrument is suited for the palatinal reduction of adhesive in the lingual technique.

Added 04/22/2008

This handpiece, disk guard and high-torque diamond disk system was specifically developed for practitioners performing interproximal reduction IPR and is particularly helpful for Invisalign® patients, where Slenderizing is indicated.

The Spee Reducer™ dramatically slows down the diamond disk while maintaining the Newtons associated with the actual motors RPMs, enhancing control, while affording your patients a much safer Slenderizing experience. The Reducer kit comes ready with 1-16:1 Handpiece, 15-High-Torque Diamond Disks and 20-Clear Disposable Disk Guards.

Call SPEE™ at 866.369.1978 or visit www.speecorp.com to order.

Added 04/17/2008

Developed specifically for helping perform pre-orthodontic-treatment interproximal reduction, the Spee Slenderizer System enhances patient safety as well as chairside productivity. Its use eliminates the risk of reducing too much enamel and concern about the patient moving when the diamond is in close proximity to soft tissue.

It is a 16:1 Straight Reduction Handpiece that slows down the rotation of the diamond disk, without losing any of the power needed to properly perform IPR procedures. When used in combination with CLEAR DISPOSIBLE DISK GUARDS™ you have the control and safety to remove just enough, while having the confidence that the patient is safe.

Added 04/17/2008

Ideal for Invisalign® patients where Slenderizing is indicated, clear disposable disk guards are available for dentists doing interproximal reduction (IPR).

Use of the Disk Guards prevents slipping, and thus eliminate the risk of cutting a patient's lip or soft tissue. They allow you to actually hold the disk at the cutting edge rather than several inches away on the handpiece.

Call SPEE™ at 866.369.1978 or go to our website at www.speecorp.com to order.

Added 04/17/2008

DentiMax ’08 practice management software combines easy-to-use screens with a complete feature set and economical pricing. From the charting screen, you can post procedures directly to the ledger and are one click away from digital x-rays, clinical notes, treatment planning and medical alerts. The software also provides advanced scheduling and front office capabilities.

DentiMax also offers a complete, integrated sensor and imaging solution.

The single user program is priced at $499, the network program sales for $2,499 and the complete digital sensor practice management bundle is offered at $13,999.

Contacts:
(800) 704-8494
sales@dentimax.com
www.dentimax.com

Added 04/16/2008

Delivering a quality experience at an entry level price point, the economical NuStar dental chair combines innovative technology with quality components resulting in an easy to use, durable dental chair.
Standard features
Embossed membrane touchpads for the doctor and assistant
Double-articulating headrest
Swing away armrests
Standard 3 year warranty
Durable steel mounting plate
Automatic shut-off safety plate
Single position foot control.
The NuStar dental chairs are available in22 standard upholstery color choices and are manufactured to fulfill industry leading lead times locally in Newberg, OR per the specific configuration of each individual order.
For more information on the Marus NuStar dental chair, please contact Marus at 800-304-5332, or visit www.marus.com.

Added 04/10/2008

Pelton & Crane introduces six new Flexible Monitor Mounts.

Available in six mounting variations: Track, Ceiling, Cabinet, Wall, Post and Ellipse Mounted, the mounts provide advanced positioning capabilities for optimal patient, doctor and staff viewing of the patient monitor within the dental operatory.

Features

• Smooth, seamless handles for easy asepsis
• A handle assist allowing 0° to 90° of monitor movement with less than 4 lbs. of force
• CompressFLEX™ technology which allows the system to travel 40° above and below the horizontal plane, equating to 27” of linear movement..
• Rotates horizontally 350° at two pivot locations.

Accommodates up to a 19” flat screen medical-grade monitor

Added 04/10/2008

Accutech Orthodontic Lab’s Freedom-Lock™ rapid palatal expander (RPE) can be integrated into multiple types of appliances.
Its delivers a rigid and secure appliance, with the clinical advantage of quick and easy removal or reinsertion any time during treatment. Any type of screw that would be used for a fixed RPE can be used with the Freedom-Lock™ system. Its hinged mechanism fills the buccal tube with a snug fit but easily slides in and out, and it has a gentle curve that crosses the occlusal surface. The hinge mechanism locks in--the custom designed “flat” locking clasp ensures retention. Its design delivers a snap-tight lock for insertion and easy release flexibility for quick removal.
Quick and Easy Insertion
Freedom-Lock™ delivers superior expansion – it pushes from the lingual and pulls from the buccal simultaneously; and delivery is simple. After the bands are cemented, the RPE snaps right in. It is not soldered to the bands.
Removal and Re-insertion Advantages
The Freedom-Lock™ comes out, and the bands stay on the teeth therefore adjustments can be easily made outside the mouth. Springs and clasps can be added as needed, and larger screws can be inserted with no relapse or new bands.
Hygiene and Cost Savings
A patient’s oral hygiene is greatly improved because the Freedom-Lock™ can be completely removed at each appointment for a thorough cleaning. When the expansion is complete, the appliance reduces chair time and band usage. The appliance is removed and the bands can remain for continued treatment.
For more information about Accutech, please call 800-734-7855 or visit www.accutechortho.com.

Added 04/10/2008

Weighing 4 grams (0.13 ounces), the Ultralight Optic is the lightest and smallest LED dental loupe light on the market. Among its features:

BRIGHT, TRUE-COLOR ILLUMINATION--Its 3 watt LED produces up to 39,000 lux (3,600 foot candles), 6000K true white light
LONGEVITY-- LED lasts up to 50,000 hours, virtually eliminates bulb replacement.
RECHARGEABLE--Lithium ion battery pack gives you 8 hours of consistent brightness from a single 3-hour charge. Fully adjustable intensity lets you decide how bright you want it. Ultra thin Li-ion battery pack increases comfort and wearability.
VERSATILE--Fits Designs for Vision, Orascoptic, Surgitel, Sheer Vision, OptiVision Industries, Q-Optics, Carl Zeiss dental loupes DURABILITY AND STABILITY--Aircraft grade aluminum construction

SPECS
Diameter: 0.65"
Length of Module: 0.76"
Weight: 4g or 0.13oz (approx. the same weight as a nickel)
Focuses a 2.5” spotlight @12”
Fully adjustable brightness
Custom Module Colors: Black or Silver
For more details, visit http://www.ultralightoptics.com/Index.html or call (323) 316-4514.

Added 04/10/2008

Designed specifically for radiology imaging centers and large practices, Picasso Master is equipped with an advanced flat panel X-ray sensor to capture a 20 cm x 19 cm field of view, which provides three dimensional images of the entire oral maxillofacial anatomy--including temporomandibular joint, sinus and airways-- from a single 360-degree scan.

Its high image quality mode compensates the image-scattering effect of metal artifacts such as crowns and oral implants.

FEATURES
Easy-to-use LCD controller and voice guided instruction to position patient along with midsagittal, vertical, and horizontal laser beam allow an efficient user interface of the most sophisticated cone beam X-ray machine to capture and process the most reliable 3D X-ray images for more accurate analysis of bone structure and tooth orientation.

EzImplant, the pre-installed computed tomography 3D viewing program not only processes a complete diagnostic view of all facial structures but also provides an effective patient information management tool with networking capability to group of oral surgeons, orthodontists and dental support staff. It allows easy image conversions through various rendering methods such as:

• various MPR functions
• cross-sectional view
• two-dimensional analysis
• and three-dimensional animating work

Added 04/01/2008

Eliminating the need for bulky dispensing guns, GingiTrac gingival retraction material is now available in a hand-held 2.5 ml syringe. The two-step procedure utilizes patients' bite pressure to push astringent GingiTrac into the sulcus and retract the tissue in less than five minutes. Attain gentle, predictable gingival retraction—all without packing cord.

• Use GingiCapTM for single prep retraction, GingiTrac used with Matrix for multiple prep retraction
• Works in less than 5 minutes, without hands in mouth
• Get more accurate impressions
• Works gently, no tissue trauma or ligament damage
• Contains a mild, natural astringent to control bleeding and oozing
• No messy clean up

Added 03/31/2008

3M ESPE announces the introduction of the Pentamix™ 3 Mixing Unit, the latest state-of-the-art automatic mixing unit, featuring faster speeds and a smaller footprint than any other automatic mixing and dispensing system in the industry. With twice the speed of the Pentamix™ 2, the Pentamix 3 accommodates a broad range of material viscosities, especially quick setting materials, and consistently provides homogenous, void-free automatic mixing at the touch of a button.
The new high-tech design and easy-to-use features ensure accurate material dispensing and comfortable handling.

New Penta cartridges feature product names, working times and setting times printed on the cartridge lever for clear visibility when the device cover is closed, reducing the potential for error and waste. With a more compact, streamlined design, the Pentamix 3 requires minimal counter space and may be wall-mounted.

Added 03/31/2008

The Belmax CM digital panoramic/ cephalometric X-ray system is simple to use, produces sharp diagnostic quality images and includes built in tomography software. Standard Features:

• Radiographs have minimal interproximal overlap for easier detection of carious lesions
• Sharp images can be obtained, even with mild patient positioning errors
• High frequency X-ray generator minimizes patient exposure to radiation
• Specify right or left cephalometric arm
• Single CCD sensor can be moved between panoramic and cephalometric docking ports
• Pushbutton controlled three-laser beam alignment system for correctly positioning patient mid-sagittal, frankfort and focal-trough planes
• Pushbutton controlled X-ray head height adjustment accommodates adults or children, both seated and standing
• Exposure parameters are easily selected on an outboard computer with a few mouse clicks (computer & mouse not included) 60-100kV; 2-12mA
• 0.5mm x 0.5mm focal spot
• Fast 7 second scan or 12 second scan time
• Rotational speed adjusts to reduce shadow effect on the film of the cervical vertebrae
• Reliable CCD sensor technology for crisp 12 bit images
• Digital sensor module replaces film cassette
• TWAIN driver to interface with most practice management systems

Added 03/26/2008

Designed for enhancing accuracy and efficiency for posterior impressions, especially 2nd and 3rd molars, Dam It' posterior tray dam and periphery extension membrane is an easy to apply self-adhesive. membrane. It actually incorporates into the impression material and helps prevent gagging.

The Membrane is marked for alignment with the bottom of the tray, and after it is placed, three 1/4 inch slits are cut to allow conforming to the patient. A standard kit comes with with four rolls and a dispenser. An Intro Kit comes with one roll and one dispenser.

Added 03/26/2008

Developed as an alternative to traditional braces and invisible aligners, the SpeedAligner removable orthodontic appliance is intended to correct minor tooth crowding and rotations, especially in relapse cases. It resembles a Hawley-type retainer.

Esthetics and function
The appliance designed primarily to provide esthetic treatment. The appliance also obtains functional results because it is capable not only of tipping, but also bodily moving teeth.

Efficient, effective
The flexible, durable appliance uses pre-activated QuikSprings that provide a low-rate, constant, light, continuous, optimal force to align the six anterior teeth and their roots. Treatment requires minimal to no interproximal slenderizing. The appliance standard version is not designed to change jaw positions. It can be constructed with one or more expansion screws for more complex cases.

Customized treatment
Also, five different spring sizes are available to fit individual tooth sizes, in addition to left- or right-handed springs in each size to correct mesial or distal rotations. The appliance is shipped to the doctor’s office pre-activated and pre-adjusted.

Added 03/26/2008

The Flashlite Magna lightweight cordless curing light has 3 LEDs that generate powerful light over a wide 11-mm beam. Features include:

• Easy to use push button on/off switch
• An easily replaceable slide-in lens cap to avoid scratches, blemishes, and cracks
• Built-in heat sink for extended run time
• A small charger base with built-in radiometer
• Lithium ion battery for 180 ten-second cures per charge

Added 03/24/2008

A new Mini Macro Ring and Point Flash now is available for Nikon's 10 mp D60 digital SLR camera. Nikon’s D60 is the latest digital SLR camera produced to be both a high functioning dental and personal camera.

Dine's Ring and Point Flash combines the ideal flash for intra-oral photography, the ring flash, with the ideal flash for facial photography, the point flash. Users choose between flashes with the flip of a switch. The new flash features a new power supply that is considerably smaller and lighter than existing Ring flash models. This new design reduces the weight of the camera flash by half. The Mini Ring and Point Flash makes the overall camera system lighter and more maneuverable and thus easier to use.

The New Dine/Nikon D60 kit includes a 105mm macro lens with Dine created dental standardization guide. This guide graphically indicates the ideal lens setting for most popular dental photography subjects, as well as recommended f:stops.

All Dine Dental Kits include lifetime telephone support and written set-up and use instructions. Complete kits also include intra-oral mirror, cheek retractors, dental contrastor, 1 gig memory card, memory card reader.

Price, $1995 for a complete package of camera and accessories. For more information please visit www.dinecorp.com or call 1-800-624-9103.

Added 03/24/2008

The Emdeon Expressbill Services Module allows ADSTRA CLAIMS PLUS users to submit patient billing information with a few simple clicks of the mouse. In addition to submitting their claims electronically, offices will now be able to also transmit their statements electronically. The information is instantly transmitted to Emdeon, an electronic healthcare record service, where invoices and statements are prepared the next business day. This service prepares accurate, easy-to-read paper documents. The Emdeon Expressbill Services Module saves administrative time, reduces storage needs, and minimizes mailing and postage costs. Having an easy interface within the ADSTRA CLAIMS PLUS Patient Management Software Program saves time and increases efficiency while reducing chance for error.

Added 03/13/2008

eCentral is the new software solution that streamlines many of your non-treatment related tasks through automation and advanced integration. In fact, no other single software solution can do everything that eCentral can.

Added 03/07/2008

The GXCB-500 features a one-of-a-kind ‘medium’ field of view, which can be extended up to 14 cm in diameter by 8 cm in height, provides a “jaw” or molar-to-molar view, compared to a full “skull” view of the industry-leading i-CAT. This medium view size makes the GXCB-500 a powerful diagnostic and treatment-planning tool, especially for implant planning, TMJ analysis, and small oral surgery procedures. The system’s unique Amorphous Silicon Flat Panel sensor yields accurate, highly detailed image quality at the fastest scan and reconstruction rates in the industry (8.9 seconds and 20 seconds respectively), that allow dental teams to experience greatly improved workflow. Adding to the value of the GXCB-500, the system serves a dual function — it also features traditional digital panoramic imaging for capturing 2-D data.

Added 02/28/2008

DEXIS Gives You Freedom of Choice

DEXIS is pleased to introduce DEXusb™ — a fast, robust USB sensor controller. This new offering presents another option to dental professionals who want a digital X-ray imaging solution that provides maximum portability, ease-of-use, and affordability. Interest in digital X-ray continues to grow, so providing this exciting connectivity alternative, for the DEXIS Classic sensor, along with the existing benefits of the DEXIS system, will help dentists move forward in their decision to go digital — with DEXIS.

DEXusb highlights include:

• Sleek, contemporary design with graceful curves and high-gloss white finish looks right at home in high-tech medical settings
• Highly portable — requires no docking stations or adapters to allow easy movement between operatories
• Completely self-powered — no need for batteries or an external power supply
• Common USB connectors offer simple, “plug and play” functionality
• Hot-swappable — connect and disconnect from computer at any time without interrupting workflow
• Software operation and image acquisition remain unchanged and as easy to use as always — there’s no additional software to launch or learn
• Versatile placement — designed for use on a counter top, and/or the unit can be wall-mounted (bracket included) for quick, convenient access
• Certified USB 2.0 and USB 1.1 compliant. Mini-USB connector is rated more than 3 times more durable than USB type B

Added 02/28/2008

Technology in the dental market has changed rapidly over the past few years. With the KODAK 9000 3D extraoral imaging system, 3D technology is now available to any dental practitioner. This two-in-one solution brings powerful, focused field 3D imaging to dental professionls like never before. You select the program on your computer, and the unit automatically switches between 3D and panoramic modes. You and your staff will never have to manually change the sensor.

Added 02/26/2008

The easy-to-use Aribex NOMAD Pro is the most advanced intraoral X-ray system available. Its handheld design improves dental radiography speed, convenience, and quality. The NOMAD Pro builds on the heritage of the award-winning NOMAD X-ray system.

Added 02/17/2008

DentLight introduces FUSIONTM LED curing light with chair side mounting and custom color options. FUSIONTM combines exceptional performance with solid metal body design that sets the new standards in portable LED curing lights. It uses a patent-pending Focused LED Beam technology unleashing proven power of 1500 mW/cm2 light beam, while more importantly, maintaining high power over distance for fast and deep cure. Combined with its wide spectrum, FUSION delivers the most efficient and reliable solution to restorative procedures including curing composites (5-seconds for 2mm A3), cementing veneers, adhesives, liners, sealants, and bonding brackets (3-seconds for metal brackets). Its sleek anodized aluminum body, weighing only 110 grams, distributes LED heat and prevents scratches, discoloration and damage from accidental falls. FUSION is simple to operate with two built-in timer programs of 9 seconds (beeping every 3 seconds) and 20 seconds (beeping every 5 seconds). Its smart rechargeable Lithium-Ion battery enables 300 9-second cures in one full charge (90 minutes) and is replaceable. With a direct power plug at the end of the handpiece, FUSION eliminates down time even when battery is low. FUSIONTM gives your practice a Personal Touch and Feel with optional colors of silver, pink, blue and gold metal handpiece. With the addition of chair-side charge holder, FUSIONTM Cordless gives you the true power, flexibility and convenience in your practice.

Added 02/01/2008

ADSTRA SYSTEMS has released the M4 version of their ADSTRA CLAIMS PLUS™ free management software for electronic claims, featuring a new control bar on top of the screen, underneath the main menu, and advanced financial options.

Added 01/14/2008

Lester A. Dine Inc., leaders in dental photography since 1952 now offers the ideal Dental Camera lens and flash for Canon’s 12.3 mp 40d digital slr camera. Canon’s 40d is the latest digital SLR camera produced to be both a high functioning dental and personal photographic system. The Dine/Canon 40d Dental Camera kit features the Dine invented ring flash for intra-oral photography plus an adjustable point flash for facial photography as well as descriptive anterior and lateral picture taking.

Added 01/14/2008

Consult-PRO WEB is a mini version of the Consult-PRO Chairside Education Software set up a personalized link on the Dr's Website. Customized with a logo and a personal message from the Dr's office Consult-PRO Web provides 33 Animated voiced over video presentations, introduced by a hygenist avatar and displayed on a small screen. A video link option will enable the Dr. to deliver a personal video message to patients, thanking them for visiting his/her website. Available FREE for one year with the purchase of one year of support, maintenance and updates for Chairside Patient Education Software.

Added 12/07/2007

The portable EyeMag Light is a powerful LED light source that brilliantly illuminates the visual field and ensures maximum detail recognition and high contrast. With its easy operation, integrated temperature regulation and a lightweight, compact design, EyeMag Light provides optimum wearing comfort for daily use, even during longer periods of treatment. The portable illumination system is an ideal supplement to the range of EyeMag loupes from Carl Zeiss.

Added 11/16/2007

EyeMag Smart loupes provide superior image quality at 2.5x magnification. The compact design of the optical components as well as the versatile adjustment possibilities, promote comfortable working conditions and intuitive operation. Large fields of view allow for an optimum overview of the working field. Customizable settings, in addition to a large selection of working distances, permit an optimal, ergonomic treatment position. The titanium frame carrier system ensures an even distribution of weight minimizing fatigue during long periods of treatment. The flip up function facilitates unobstructed vision and easy communication with your patients.