New Dental Products 

GC Initial IQ is a one-body, layering-over-metal ceramic that enables dental technicians to achieve simple and economical reproduction of standard Vita shades by application of a single layer--only four ceramics for all 16 standard shades. The one-powder build ceramic offers exceptional esthetics. The compact ceramic set allows fast ,easy, consistent reproduction of the standard Vita shades with fewer materials. Four new Body materials can be combined with the proven three-dimensional Lustre Pastes.

Benefits include:

• Crown build-up with only one powder allows full attention to shaping and function
• Fast reproduction of standard Vita® shades following the "Paint by numbers" with Lustre Pastes
• Total compatibility within the existing MC/Initial range and with many alloys
• Saves time and increases productivity by using one powder • Can be used as an excellent starter module for new ceramists

Added 11/18/2009

Designed specifically to cut zirconia at high speeds, the ZR943 diamond disc is designed to cut off sprues from pressed ceramics and to separate the coping from the HIP zirconia blank. Available in FG shank only, the ZR943 disc is obtainable in three sizes (065, 080 and 100). With a medium grit of 100 µm, it has a 1 mm coating of quality industrial diamonds on 0.3 mm of the disc’s width.

Used at optimal speed of 160,000 rpm and with sufficient water cooling, the ZR943 diamond disc is also suited for the separation and contouring of veneer ceramics; however these discs are not designed for intraoral use.

Added 11/04/2009

The Anterior Contacts Mirror simplifies photographing overjets and anterior contacts. The inset curved end follows the curve of the arch for comfortable placement. The mirror can also be used for standard occlusal arch views.

Added 10/21/2009

PhotoMed's new R2 Dual Point Flash Bracket is designed to provide maximum flexibility in flash positioning. Bring the flash heads in towards the lens for posterior views and mirror shots. Spread the flash heads out to the side for anterior aesthetic images and natural looking smile shots. Each flash head can be repositioned "on the fly" with one hand.

The R2 Bracket is available in Nikon or Canon configurations and is compatible with Nikon's R1 and R1C1 macro flashes and Canon's MT-24EX macro flash.

Added 10/21/2009

The Programat S1 sintering furnace is a light-weight and compact unit that sinters single unit frameworks made of zirconium oxide materials in as little as 90 minutes (conventional sintering furnaces require five to eight hours). As a result, crowns and bridges with an IPS e.max ZirCAD or other ZrO2 framework can be fabricated in one day.

Additionally, the Programat S1 conserves energy through its “Power Saving Technology” creating a positive impact on production costs, because less time and energy are expended for the process. This efficient and economical sintering process does not jeopardize the high material strength and accuracy of fit of the restoration.

Another feature of the Programat S1 is its easy operation. The user-friendly control panel features a graphic display and membrane sealed keypad for easy programming. The OSD (optical status display) uses different colors to show operating status, which can be seen even from a distance. The Programat S1 also features a compact design and light weight.

Like other furnaces in the Programat line, the S1 is equipped with robust technology, including a removable furnace head for easy maintenance, and a calibration option that enables the sintering temperature to be checked and adjusted at any time. The furnace’s heating muffle technology features a new type of heating element that is specifically designed for intensive everyday use and characterized by a long service life and uniform heat emission. The Programat S1 also comes with a USB interface, so it can be connected to a PC or laptop for updates, as needed.

Added 10/06/2009

E4D Labworks is a comprehensive solution for scanning, designing and milling full-contour glass-ceramics to create single-unit metal free restorations. A stone model or impression is scanned; function and esthetics are designed by DentalLogic software; restorations are milled in minutes using materials from Ivoclar Vivadent or 3MESPE.

Up to 16 single units can be designed simultaneously, making the E4D Labworks system optimal for funcional restorative cases or smile designs. E4D Labworks consists of 21" monitor, CPU, E4D Skyball™ navigation, keyboard and mouse,fully licensed DentaLogic Software, handheld laser scanner and holder, E4D Mill HP (High Production), job server and network router.

E4D Labworks, along with the E4D Dentist chairside system and the E4D Studio design center, comprises a complete CAD/CAM restoration system--E4D Sky.

Added 09/16/2009

Designed to hold and place crowns, veneers, inlays and onlays, Griptab is a small handle that is adhered to the restoration; the light-cured, flexible adhesive is strong and moisture-resistant, yet easily and cleanly detaches from the restoration at the end of the procedure. By having a handle on the restoration, the dentist has a reliable grip for total control over the process.

Griptab ensures precise control during try-ins, and during hydrofluoric acid-etching, silanation and even ultrasonic cleaning. The restoration can be picked up and released multiple times in a passive, controlled way with no risk of dropping it on the floor. Griptab is not just for dentists but also for assistants and lab technicians, overcoming the awkwardness and risk associated with handling indirect restorations.

Griptab provides:
• An adhesive resistant to Silane and moisture
• Easy pick-up
• Secure grip
• Accurate, sure placement
• Passive and controlled release
• The ability to pick up and put down a restoration multiple times
• Peace of mind when handling restorations

Griptab comes in three sizes to handle any type of bonded or cement restoration:
• Small – for inlays and veneers
• Medium – for inlays, onlays, veneers and crowns
• Large – for crowns

Added 09/07/2009

ACRYL-MARVEL denture finishing and polishing system is formulated to simultaneously remove scratches and impart a high shine to full and partial dentures. It eliminates the need to stop working, wash pumice-like materials from the denture and change brushes during the polishing procedure.

ACRYL-MARVL is offered in a solid, bar-like material that eliminates the use of pumice or pumice-like powdery materials. It is used in a totally moisture-free environments. It allows the complete finishing and polishing of the appliance at the normal, sit-down working area. Small brushes or wheels may be effectively used in and around gingival cervical areas without disturbing the natural contours and other esthetic effects, which greatly enhances the appearance of the finished product.

As well as being supplied in a LAB-SIZE, 500 gram bar, ACRYL-MARVEL is available in a “Repair-Bit Kit,” designed to eliminate cross-contamination and simplifying repair procedures. The kit provides a quantity of small-sized nodules to be used in individual repair cases. One nodule can be used for a case with the remainder discarded. Introductory Specials are available at $25 for the large, LAB-SIZE. The “REPAIR-BIT KIT” is $20, and a combination special is available for a limited time for only $35.

Added 08/17/2009

GEM light-weight Class II flip-up loupes are designed to offer quality resolution, clarity, and visual acuity at an economically affordable price. GEM loupes are exceptionally lightweight for all-day comfort. The GEM is ideal for first time loupe wearers, students and dental assistants who want all the benefits of magnification at an affordable price.

The GEM features Orascoptic’s popular titanium Victory frame, and is available in slate or wine color. Each GEM is backed by a limited lifetime warranty and comes with side shields, a head strap, protective lens caps, and a sleek black storage case.

Through December 31, 2009, GEM loupes are available for free with the purchase one of Orascoptic’s HiRes or HiRes Plus loupes. This offer cannot be combined with any other Orascoptic promotion.

Added 08/10/2009

Now available in the United States, the Hex-Lock Short Abutment and Restorative System is an all-inclusive system designed to promotes simple, immediate, and convenient posterior restorations. It includes the new titanium Hex-Lock Short Abutment and corresponding Short Restorative Components to address clinical situations such as limited interocclusal space, reduced visibility, and time-consuming prep work.

With the Hex-Lock Short Abutment’s reduced cone height, predetermined margins, and off-the-shelf convenience, chair and preparation times can be significantly reduced. The all-inclusive Restorative System provides snap-on caps for easier abutment level impression taking, and prefabricated copings for immediate provisionalization and final crown preparation.

Because the restorative protocol is the same as Zimmer Dental’s Hex-Lock Contour Abutment System, no additional learning curve is required, and with color-coding to match the emergence profiles, customers have a system that is simple, immediate, and convenient. The Hex-Lock Short Abutment and Restorative System is appropriate for single- and two-stage protocols, and is designed to work seamlessly with the Tapered Screw-Vent and Screw-Vent Implant Systems.

Added 06/22/2009

Designed for CAD/CAM fabrication of multi-unit, fully or partially anatomical long-term temporary anterior bridge restorations with up to 2 pontics as well as temporary crowns, VITA CAD-Temp multiColor blocks feature four natural shade layers with exceptional esthetics for anterior long term provisional restorations. They are particularly suitable for implant patients where long term tissue healing is prescribed.

Exhibiting a well-balanced combination of tensile strength (approx. 80 MPa) and elasticity (approx. 2800), CAD-Temp multi-Color blocks are easy to remove from the die without fracture or distortion. The blocks are made for dentists and dental laboratories using the Sirona CEREC and the inLab MC XL System and can be perfectly milled with the diamond burs of both systems with the latest software version of 3.60. CAD-Temp multiColor blocks are compatible with all provisional cements.

CAD-Temp multiColor blocks are available in shades IM2, 2M2 and 3M2 VITA 3D-Master shades. The natural fluorescence and lasting color stability of the blocks provide excellent esthetics. Superior polishing characteristics make the blocks easy to polish with a silicone polisher and small brush and also makes them less likely to attract plaque.

The blocks can be customized with light curing composite such as VITA VM LC and can be built-up or individualized to any shade variation for partially anatomical restorations.

Added 05/26/2009

Indicated for veneer, crown, bridge, implant, and partial and complete denture treatment planing, the PerfectAlign device helps determine and communicate to the lab the critical measurements for creating anterior esthetics.

The PerfectAlign accurately locates the patient's midline, vertical axial inclinations, and horizontal plane; it also verifies the incisal edge position of the central incisors. Its design offers the practitioner compete visibility of all anterior teeth while taking measurements.

A kit contains components to complete ten cases: 10 bite trays, 20 clear alignment rulers, 10 wells & 10 transfer brushes, 1 glue syringe and plunger, and 10 syringe tips

Added 05/18/2009

Triotray rigid and accurate posterior impression trays eliminate bounce-back and lock impression material in the side tabs. The trays' sturdy metal frame incorporates side tabs adjust to suit all patients, including those with shallow palate, wide buccal plate or mandibular tori. The thin retro-molar area allows patients to easily close in centric occlusion. Triotrays consistently take successful impressions – saving time and eliminating frustration.

Added 04/05/2009

Vident’s Easy Polishing Instruments are designed to save dentists and technicians time and increase efficiency without compromising the quality or appearance of finished CAD/CAM ceramic restorations. Utilizing a proprietary 2-Step System, the instruments eliminate the need for pre-polishing pastes or re-firing with glazes. There’s no heat build-up or grooving and the instruments prevent the formation of micro cracks.

These high performance grinders and polishers produce a high luster appearance to all ceramic restorations with no scratching. The instruments incorporate diamond impregnated technology--interspersed with diamonds in a synthetic bond, the high performance grinders are able to abrade large amounts of material for fast contouring and finishing. They effectively prepare ceramic surfaces for polishing and are easy to use when reworking or adjusting porcelain and ceramics. The high performance diamond polishers provide a high luster polishing and smoothing of porcelains and can be used for high-strength materials such as zirconia and aluminum oxide.

For easy identification and quick selection, all Easy Polishing Instruments are color coded and offered in multiple shapes. The shape choices provide excellent visibility of the working area for any kind of anatomy or contouring procedures.

Easy grinders and polishers are available with HP and RA shanks for laboratory or intra-oral, contra angle application and are offered in sets with two grits each of grinders and polishers, or they can be purchased separately.

Added 03/16/2009

Highly-precise, digitally fabricated models are now available for select cases processed through the CEREC Connect online communication platform by CEREC inLab users. The digital impression sent by the CEREC dentist is uploaded into the inifiniDent system and the model is sent to the laboratory ready for wax-up or porcelain build-up. Additionally, the dentist receive the full-arch and quadrant tooth-colored models, presented with precisely ditched and separated dies. These physical models are particularly suited for bridges, PFMs, and gold crowns.

Added 03/06/2009

DENTSPLY Trubyte's TruRx™ Digital Denture Prescription is an interactive program , designed to simplify denture tooth selection and the entire denture process. TruRx™ begins with a digital photograph of the denture patient, which is imported into the program. It then guides the dental professional and the patient through the denture process, as they address key denture considerations. TruRx™ culminates in a detailed prescription with a likeness of the patient’s post-therapy image.

For the lab, the system produces a complete and easy-to-read TruRx™ detailed prescription that can be received via e-mail, fax or print-out, and it aids in work flow planning and tooth inventory management.

In the dental practice, the system provides an interactive, custom denture consultation Standardizes and simplifies the denture process; enables the denture consultation to be delegated to an auxiliary; shows patients their post-therapy image during their FIRST visit; and educates patients for improved understanding and acceptance of the treatment plan.

Added 03/05/2009

Accommodating standard 380-ml impression material cartridges, the Fresh Profimix automixer offers a dispensing speed of 80 to 90 ml per minute. Its translucent cover allows monitoring of contents. Control wheels on either side of the unit accommodate right- and left-handed users.

Added 03/02/2009

The DIAGNOdent caries detection system has been optimized and expanded with the DIAGNOdent Display 2191, a stand-alone display that receives its data remotely from the DIAGNOdent pen and displays them enlarged and distinct.

Measurements are quickly and easily visible to you and your patients. The measured results of the DIAGNOdent pen are sometimes difficult to read, and sometimes they do not lie within the patient‘s line of vision. In these instances, the optional remote display can be used.

By means of an infrared interface, the DIAGNOdent are shown both on the handpiece and the display. It can be set up wherever you and your patients need to obtain clear visual confi rmation that caries treatment or calculus removal is necessary.

Features include:

• Easily visible and readable DIAGNOdent values
• The values are readable both on the display and the DIAGNOdent pen
• Easier to work
• No annoying cable
• Better patient retention
• Useful as a starting point for patient consultation and a patient recall system

Added 02/19/2009

Compact enough for placing on a cart or countertop, the Demolizer II provides a simple, effective solution to biomedical waste management at the point of generation, thereby eliminating the possibility of sharps and red bag biomedical waste being disposed of directly into the environment. With the touch of a button, biomedical waste processed with the Demolizer® II is rendered sterile and non-biohazardous and does not generate hazardous or toxic compounds. The system eliminates waste hauling costs up to 100% with this proven, cost-effective approach to on-site biomedical waste management, It offers low capital expense and low cost consumables, and requires no special facility or electrical requirements . Additionally, it eliminates excess handling of infectious waste as well as the risk of exposure to patients and staff during storage.

Added 02/18/2009

Developed in conjunction with Dr. Joseph Massad, Bur Kits TD2064 and TD2065 are designed for use on removable prosthodontics, particularly when remodeling lingual cusps. THe kits contains diamond grinders for both dentists and laboratory technicians. Dental professional will feel the impact of these kits as they assist with tooth set-up time and post-processing equilibration. The burs prevent a prosthesis from tipping by reshaping grooves and eliminating interferences achieving a smooth central fossa. This results in ideal mandibular tooth topography without sacrificing esthetics. This reshaping provides the central fossa a home for opposing maxillary lingual cusps in centric relation occlusion. Both the TD2064 and TD2065 kits also come with the proper instruments for trimming and polishing acrylic, and the metal parts of the prosthesis. The kits also come with a Post Dam Bur for creating a consistent calibrated method to carve the post palatal seal. Having the right kit will allow dental professionals to rapidly achieve post-operative equilibration and to significantly minimize post-operative appointments.

Added 02/05/2009

The VITA 3D-Master Linearguide enables the quick determination of precise tooth shades and uses the same scientific principles and 29 shades found in the VITA 3D-Master shade guide. The Linearguide features a sleek, linear design simple, fast, precise shade determination. In two simple steps the final shade is achieved, first by selecting from five value tabs, then by choosing the proper mix of chroma and hue within the selected value range.

Added 02/04/2009

The VITA 3D-Master Linearguide enables the quick determination of precise tooth shades and uses the same scientific principles and 29 shades found in the VITA 3D-Master shade guide. The Linearguide features a sleek, linear design simple, fast, precise shade determination. In two simple steps the final shade is achieved, first by selecting from five value tabs, then by choosing the proper mix of chroma and hue within the selected value range.

Added 02/04/2009

Designed for use in dental offices and dental laboratories, the Easyglaze furnace is a space-saving staining and glazing unit. The Easyglaze furnace is fully automatic and features a roomy, wound alloy muffle, a 3-inch diameter firing tray and a microprocessor capable of holding temperatures to within ± 2 degrees Celsius.

The Easyglaze furnace features a small, space-saving design and a motorized clamshell designed to prevent firing tray shake. With two preset firing programs and three additional customizable programs, the Easyglaze is appropriate for any firing need that does not require vacuum.

The controls are simple to use and the LCD display is large and easily readable, providing the Easyglaze furnace with an easy-to-operate interface. The furnace carries a one year warranty.

Added 01/27/2009

Easy to use and clean, the Alghamix II mechanical mixer for alginates, plasters, silicones and gypsumsincorporates an ergonomic bowl position for optimal operating conditions. A new ABS body structure ensures maximum stability during use. The Alghamix II has 2 bowl rotation speeds (high and low) with an ergonomically positioned switch. The Alghamix II has been designed with a bayonet ring for securing the mixing bowl to the mixer that allows for the use of 350 cc mixing bowl and a new 600 cc mixing bowl. Mixing bowls come in a variety of colors (sold separately) including: gray, orange, green, light blue, blue, white (machine comes with grey bowl). The Alghamix II machine provides the following advantages:

• Reduced air incorporation during mixing
• Homogeneous mixing free from bubbles and lumps
• Constant bowl rotation guaranteed by the two speeds
• Structure and design specifically designed to guarantee maximum stability during use
• Ergonomic bowl position which allows for optimal operating conditions
• Easy to remove and easy to clean bowl
• Colored bowls easily adaptable to clinic colors
• 600 cc bowl for plaster and silicone mixing plate usable for various purposes.
• 3 year guarantee

Added 01/23/2009

Engineered for use with the Zimmer Tapered Screw-Vent® implants, the Zimmer Contour Angled Zirconia Abutment is designed to delivering an exceptional combination of strength, esthetics and simplicity. Like the straight Contour Zirconia Abutment, the angled abutment’s titanium ring provides a stable titanium-to-titanium fit with the Tapered Screw-Vent implant for added reliability.

Angled at 17-degrees, the Zimmer Contour Angled Zirconia Abutment provides a natural looking base for an all-ceramic, cement-retained crown in the esthetic zone. The abutment collar is contoured below the margin to create space for soft tissue without compromising strength or quality. Combined with the highly bio-compatible zirconia material, this provides an ideal esthetic result.

Added 01/21/2009

Available for both pressing and CAD/CAM fabrication, IPS e.max HT (high translucency) lithium disilicate material rounds out the IPS e.max line, which exhibits superior strength (360-400 MPa) and esthetics for monolithic, full contour restorations that can be conventionally or adhesively cemented. IPS e.max Press HT is suited for laboratories to create minimally invasive veneers pressed as thin as 0.3 mm and expands the indications to inlays and onlays.

Added 01/16/2009

OptraStick is an easy-to-use, flexible plastic instrument that enables clinicians and dental technicians to easily and quickly pick up, hold, and place/handle indirect restorations. With just light pressure, the OptraStick adhesive tip precisely adheres to a wide range of small objects, such as inlays, onlays, crowns or veneers.

OptraStick's ball-shaped, flexible adhesive tip can be easily bent and flexed in all directions to accommodate a variety of clinical or laboratory situations. For example, OptraStick is ideal for use when trying in indirect restorations; placing and removing etching gel inside ceramic restorations; silanating restorations; applying resin cements to restorations; and inserting/seating indirect restorations in the mouth and/or onto models in the dental laboratory. The OptraStick adhesive tip is removed or separated from restorations with a simple rotary movement (twist), or a hand instrument can be used to hold the restoration in place.

OptraStick is available in refill packages containing 50 instruments.

Added 01/14/2009

This dental camera kit is based on Nikon's 6 mp D40 camera. The D40 dental kit includes Dine's Mini Ring and Point Flash a flash designed specifically for dental photography and the 105mm dental lens with dental standardization guide. The package is suitable for photographing the full range of dental subjects from extreme close-ups of two teeth to anterior, lateral, buccal, occlusal, and facial photography. The package also includes a 1 gig memory card, memory card reader and 18-55mm personal lens. Price, $1495.00.

Added 01/14/2009

Bleach and gum shades have been added to the Ceramage line of zirconium silicate micro ceramic, which allows technicians to replicate natural looking gum colors and bleach shades.

Features include:

• Microfine structure
• High compressive strength
• Excellent color stability
• Outstanding wear and versatility.
• Compared to conventional hybrid ceramics, Ceramage offers superior handling, is not sticky and does not fold or slump.
• Ceramage full gum colors can be used to restore or complete gingival anatomy, especially useful on implant cases and previously fixed porcelain restorations.

Ceramage bleach shades fulfill the desire of today’s patients for a young, healthy, white smile.

A complete set of gum colors and new bleach shades contains W0 (Super White), W1, W2 and W3.

Extremely versatile, Ceramage can be used as a stand alone material or applied to any type of alloy or as a metal-free veneering material. It does not vitrify and thus, can maintain excellent color stability.

Added 04/28/2008

Enabling you to capture still images, video, and time-lapsed video with a click, the Communicator combination digital camera/microscope provides real-time images magnified from 50-250x Power. Images can be emailed and saved; the system also allows editing, adding text or drawing on the images. Includes Software with FREE software updates and one year unconditional warranty

Added 04/25/2008

B4™ Pre-Impression Surface Optimizer is a pre-impression conditioning solution that provides uniform surface wetting prior to elastomeric impression procedures.

When applied to substrates such as sulcular tissue, tooth preparations, ceramic, composite or metal core build-up material or implant abutments or copings, it provides a uniform surface condition with reduced surface tension prior to the application of Aquasil Ultra Impression Material.

This standardized surface with reduced contact angle on all impressed substrates allows capture of fine preparation detail both supra and subgingivally. It also allows wash material to flow into hard-to-reach areas for superb detail.

Added 03/31/2008

3M ESPE announces the introduction of the Pentamix™ 3 Mixing Unit, the latest state-of-the-art automatic mixing unit, featuring faster speeds and a smaller footprint than any other automatic mixing and dispensing system in the industry. With twice the speed of the Pentamix™ 2, the Pentamix 3 accommodates a broad range of material viscosities, especially quick setting materials, and consistently provides homogenous, void-free automatic mixing at the touch of a button.
The new high-tech design and easy-to-use features ensure accurate material dispensing and comfortable handling.

New Penta cartridges feature product names, working times and setting times printed on the cartridge lever for clear visibility when the device cover is closed, reducing the potential for error and waste. With a more compact, streamlined design, the Pentamix 3 requires minimal counter space and may be wall-mounted.

Added 03/31/2008

The new blocks are the latest addition in all-ceramic material choices from the leader in CAD/CAM technology.
Created exclusively for the inLab® MC XL milling machine, the larger block size (65 x 22 x 25 mm) allows users to create high-strength, larger-span bridge restorations up to seven units. The inCoris ZI 65/25 blocks are pre-shaded and available in five different shades: FO.5, F1, F2, F3, and F4.5.

Added 11/07/2007

This dual purpose unit efficiently functions as a fume controller or a trimming station. When used as a trimming station, the unit’s adjustable chute and ergonomic design allows the operator to suction at a comfortable distance. When used as a fume controller, the unit controls fumes from mixing monomer and polymer to levels below the OSHA limit of 100ppm. Self-contained and portable. Features a see-through safety glass top, and hinged front for easy cleaning and access.

Added 09/14/2007

Fastray™ LC is a one component, light-cured custom tray material supplied in pre-formed sheets that, when used with a separator, will not distort or stick to fingers and models. Because there is no need to mix powder and liquid, procedure time is reduced and odors are eliminated. Fastray™ LC provides a firm, stable custom tray that is ready to use immediately after trimming and polishing. Fastray™ LC may be used on patients allergic to monomers.

Added 07/27/2007

• Two-wave unit: the right intensity for every viscosity
• Four settings for adjusting the vibration accurately: Range of vibrations covering all materials which need pouring. Easilyadjusted, always reproducible
• Controlled working as it stands fi rmly and only transfers minimal vibrations to the bench top. Will not tip.
• Large, easily operated lever switch
• Electromagnets provide for a very long service-life. Maintenance-free and lasting, uniform vibration.
• The rubber mat has two different degrees of hardness
• Easily cleaned

Added 07/17/2007

LeanRock is formulated specifically for laboratories who want to pour small batches (about 6) and have working models ready in 15 minutes.

Small batch processing is based on lean principals to improve work flow and reduce wait time bacause models can be trimmed and pinned after only 15 minutes, decreasing downtime waiting for stone to set. This enables smaller batches to be sent down the line for trimming, eliminating the "bottleneck" associated with large batches hitting all at once, giving you more controlled release of product.

Added 07/16/2007

The BiteSoft™ Anterior Splint, exclusively fabricated by Trident Dental Laboratories, presents an optimal and effective solution to help patients overcome Bruxism. The BiteSoft Anterior Splint can be fabricated in either Dual Laminate or Thermoplastic Lining to allow the dentist to customize the appliance for their patients. The Thermoplastic Lining material can be remodeled for those individuals who receive new dental work.

Added 04/19/2007

The ultimate in versatility, the new inFire HTC is designed to sinter all materials that can be milled on inLab® and inLab® MC XL:

• Sirona inCoris™ ZI
• Sirona inCoris™ AL
• VITA® In-Ceram YZ
• VITA® In-Ceram AL
• IPS e.max® ZirCAD

Added 04/16/2007

Geomagic Piano is a modular dental CAD/CAM software package with a built-in open-development platform. Clinically tested for over a decade by visionary dental equipment manufacturers, Geomagic Piano's proven technology enables the integration and creation of best-in-class turnkey solutions for the digital preparation and production of dental restorations.

Added 03/20/2007

Ideal for making full or partial denture models, also provides setting expansion to compensate for acrylic shrinkage.

Added 03/16/2007

The new CEREC MC XL mills a top quality, precisely fitted restoration in just 4 to 12 minutes. The new milling unit has an easy-to-read, intuitive display with light cues representing the stages of the milling process. MC XL has a large milling door for easy access to the milling chamber and automatic block placement to secure the ceramic block. The original CEREC 3 milling unit continues to be an option for dentists with lower production needs and both the MC XL and the original milling unit are compatible with all CEREC 3 units.

Added 02/13/2007

E4D Dentist is designed with the patient and operator in mind. From the very beginning, D4D has involved the user in the development of the E4D system, resulting in a product and process that is easy to use and can provide a significant return on investment for the dentist.

The value of the E4D system becomes apparent in one-visit restorations and quick turnaround time for both the patient and the dentist. Scanning, designing and seating a restoration in one visit increases the dentist's productivity and is a tremendous convenience for patients.

Added 02/09/2007

The Perfactory 3® Desktop System is designed to support Rapid Prototyping and Direct Manufacturing with a low cost, high resolution solution. Based on the principle of Photopolymerisation the Perfactory 3® Desktop System creates three dimensional resin models through a patented Direct Light Projection System.

Added 01/19/2007

Ultrasonic cleaning is a process created by high frequency soundwaves. The soundwaves create high energy cavitation. During cavitation millions of tiny bubbles form and then implode, releasing enormous amounts of energy and shock waves. This powerful scouring action reaches into minute crevices which cannot be reached by manual scrubbing. The combination of energy and specially formulated solutions make ultrasonic cleaning the most effective method for removing gross and microscopic debris. BioSonic is a complete ultrasonic cleaning system which consists of three different cleaner unit sizes, a full line of cleaning solutions and unit accessories which provide you with the flexibility to efficiently clean and disinfect instruments,prostheses and other items.

Added 01/18/2007

Product Details

• Dual Control system both brushless and carbon brush motor.
• Maxium Torque set mode
• Digital speed display(1,000~max 50,000rpm)
• Maxium Rotation speed display set mode
• Vertical & Portarble type
• Variable speed control by Hand dial or Foot pedal
• Self diagnosis system
• Error code display funtion
• Auto - cruise speed funtion
• Round Cradle for Handpiece mounted inside controller
• Convenient Magnetic Bur Holder

Added 11/30/2006

Now Easyclean takes over the tiresome, time-consuming job of cleaning – and the results are remarkable!

Speed-clean at 400 km/h
To better understand the following tip, let us first explain briefly how ultrasound cleans an object. Sonar pressure forms millions of tiny gas bubbles in the cleaning liquid which immediately implode or collapse into themselves to create "cavitation bubbles". Through the implosion they "suck in" - at high energy, up to 400 km/h and 37,000 times per second - the dust particles from the surfaces, tiny crevices, and holes of the material to be cleaned.

Added 11/30/2006

Laserdenta's OpenScan & CAD Solution is based on an OPEN industy-standard data format. Open platforms make different machines work together. Don't feel compelled to buy a one-fits-all solution from one brand or materials exclusively from one supplier.

Laserdenta's OpenScan & CAD solution create industry standard nonproprietary STL-files. You are free to choose the output method. Install a mill or 3D-printer in your lab from any manufacturer, or send files via the Internet to service providers and receive restorations by courier. You are no longer bound to one service provider! Shop around for the best prices from or start making restorations in-house.

Added 11/20/2006

The AquaSpense SL unit dispenses both water and special liquid for your investing needs. By eliminating operator error when calculating water-to-lliquid ratios and the variability of pre-weighed powder, the results are consistent casting sizes with less finishing time.

With predictable and accurate results that save time and money, and a 3 year warranty, the AquaSpense and AquaSpense SL dispensers are sure to become indispensable to your lab.

Added 11/06/2006

The AquaSpense unit dispenses water for all of our gypsum needs. By achieving accurate water/powder ratios, your models will have pedictable working times, expansion, set times and hardness. Bottom line, you will have fewer re-works due to inconsistent model work.

Added 11/06/2006

In medicine, the dosage decides if a medication is successful or not. In model fabrication, the dosage decides if a restoration fits or if it has to be corrected or even redone. The Smartbox prevents redosing since it automatically doses the plaster-water mixing ratio in accurately reproducible g/ml amounts. It works constantly, quickly, dust-free, and economically and, thus, helps to save > 20 % of plaster and time!

Added 08/11/2006

Instead of using modeling wax to manually create wax-ups by hand, the technician designs the fully-contoured crown, bridge, coping or framework using the inLab 3D software. Once satisfied with the design, the data is sent to the inLab milling machine, where it is precision-milled out of the CAD-Waxx block in a matter of minutes. This technique eliminates the traditionally labor-intensive wax-up process, as well as saving time since the design can be quickly and efficiently accomplished on-screen.

Added 05/16/2006

The new Programat P500 is an extraordinary and extremely user-friendly furnace that unites high-tech performance with a state-of-the-art design. The combination of a membrane-sealed keypad and large, clear graphic display with touch screen function is only one of the highlights that will make working with this furnace a pleasure.

Besides the new heating muffle technology and the fast furnace head opening system, the Programat P500 furnace is also equipped with a fully automatic temperature control set (ATK 2 ) with two temperature reference points (double range calibration). In addition, diverse auxiliary and configuration programs are at your disposal, which enable you to adjust the furnace to your requirements.

The Programat P500 features a variety of standard firing programs that are coordinated with the Ivoclar Vivadent ceramic materials (IPS e.max, IPS d.SIGN, IPS InLine and IPS Empress System). Hence, optimum firing results can be achieved, as all the components are available from one manufacturer.

Added 02/28/2006

The new Programat P300, which is reduced to the essentials, is an inspiration due to its cost-effectiveness. Furthermore, it features a convincing and easy operating concept.

A simple menu structure with clearly arranged symbols guides the user during the application of the programs.

The new QTK muffle technology enables an even more homogeneous heat radiation, which leads to optimum firing results you can rely on. The modern and timeless design will make the device the centrepiece of your laboratory.

The furnace is delivered ex works with pre-programmed programs for IPS e.max, IPS d.SIGN, IPS InLine and the IPS Empress System.

Added 02/28/2006