| Vendor |  | Midmark Corporation |
| Item | | M11 UltraClave® Automatic Sterilizer |
| Product Number | | Inquire |
| Warranty | | 1 Year |
| Type: Steam, Dry Heat, Chemical | | Steam |
| Pre-Programmed Cycles | | Unwrapped
|
| Self Program Controls | | Time (3 to 90 minutes)
Temperature (230 to 275°F)
Dry Time (0 to 60 minutes)
Vent (slow or fast)
The #1 and #2 buttons allow you to store changes. |
| Cycle Times and Temperature | | Unwrapped--132º C or 270º F for 3 minutes
Pouched--132º C or 270º F for 5 minutes
Packs--121º C or 250º F for 30 minutes
Handpiece (unwrapped and pouched)--132° C or 270° F for 6 minutes |
| Automatic Shut off | | Inquire |
| Unit Size | | Overall length w/plug: 22.8" (57.9 cm)
Overall width: 17.8" (45.2 cm)
Overall height w/printer: 17.8" (45.2 cm)
|
| Cassette Internal Dimensions | | 8 inches x 11 inches |
| Chamber Capacity | | 6.5 gal. usable volume (24.6 liters) |
| Chamber Diameter | | 11" diameter (28 cm) |
| Chamber Length | | Inquire |
| Reservoir Capacity | | 1.4 gal. (5.3 liters) |
| Weight Without Water | | Inquire |
| Power Consumption | | 115 VAC, 50/60 Hz, 15 AMPS Single Phase
115 VAC has 1425-watt tubular immersion heater
230 VAC, 50/60 Hz, 10 AMPS Single Phase
230 VAC has 1500-watt tubular immersion heater
|
| Optional Printer | | Impact Dot Matrix Printer; uses standard 2.25" wide x 2.75" diameter (5.7 x 7 cm) roll paper |
| LCD Panel | | Indicates cycle selected, temperature and exposure time. During the cycle, the display shows messages describing status. When the cycle enters sterilization mode and dry mode, remaining time is displayed as well as temperature and pressure. |
| List Price | | Inquire |
