Dental Handpiece Maintenance Systems

Purchasing a handpiece maintenance system can be a valuable asset to protect your dental equipment. Most handpiece maintenance systems hold three to four dental handpieces. These maintenance systems extend the life of your dental handpieces. Cleaning solution is sent through air and water lines, purging the dental handpieces of excess fluid and debris. Lubricating and service oil is also sent through rotating components of handpieces. These handpiece maintenance systems keep your dental hygienist handpieces performing at optimum performance. Cycle time varies per handpiece maintenance system but averages 15-45 seconds per handpiece. This can save your practice valuable time and ensure precise cleaning and servicing of all dental handpieces.
CompanyKaVo DentalSciCanA-dec Inc.NSK AmericaTPC Advanced Technology, Inc.
ItemQUATTROcare Plus Automatic Handpiece Maintenance SystemSTATMATIC Automatic Handpiece Maintenance UnitAssistina 301 Plus Handpiece Maintenance SystemCare 3 Plus Maintenance MachineH6000 Handpiece Cleaning and Lubrication System
PriceInquireInquireInquireInquireInquire
DescriptionThe QUATTROcare Plus Automatic Handpiece Maintenance System is designed to clean, lubricate and purge instruments with the simple push of a button. The way STATMATIC works is straight forward: just flip down the door, snap one, two or three handpieces onto the adapters, close the door, press the Assistina 301 Plus Handpiece Maintenance System is an easy and consistent way to maintain handpieces, motors, and attachments. At the touch of a Care 3 Plus Maintenance Machine has been designed to automatically and correctly process all handpieces in under 2 minutes. Both high speed and low The H6000 automatically cleans and lubricates up to 3 handpieces at one time with a touch of a button. Both high speed and low speed handpieces are
Warranty1 year10 Years1 year1 year1 year
Cycle Time20 - 45 seconds15-60 seconds35 secondsUnder 2 minutesS Mode: 35 seconds
L Mode: 45 seconds
E Mode: 50 seconds
Number of Handpieces43 Handpieces
1 Chuck
133
Air Purge CycleYesYesYesYesYes
ConnectionsCompressed Air: 58 - 145 psiCompressed Air: 58-87 psiCompressed Air : 65 - 140 psiCompressed AirCompressed Air
Handpiece TypesHigh Speed
Low Speed
Air Motor
Air Scaler
Electric
High Speed
Low Speed
Electric
Contra angle
Straight
Straight
Contra-Angle
High Speed
Low Speed
Air Motor
Air-Driven Scaler
Electric
High Speed
Low Speed
Low Speed
High Speed
Other Manufacturer AdaptorsKaVo
Lares
Midwest
NSK
Siemens
DentalEZ/Star
W&H
Bien-Air
Kavo
Midwest
W&H
Sirona
NSK
Bien Air
KaVo
Lares
Midwest
NSK
Siemens
Sirona
Star
W&H
Universal Adapter Accepts Many Other Handpieces
E-Type
NSK
B2/ M4
W&H
Sirona
Bien-Air
F-Type
Midwest
E-Type
NSK
B2/ M4
W&H
Sirona
Bien-Air
F-Type
Midwest
Oil CapacityNot AvailableNot Available250 mL350 mLNot Available
Fluid Level IndicatorNoNot AvailableYesYesYes
Number of Cycles Unit Refill100Not Available3,500 (Service Oil)
2,500 (Cleaning Liquid)
3,5003,500
Footprint344 x 292 mm (13.6 x 11.5 inches)40.6 x 29 x 19.3 cm (16 x 11.4 x 7.6 inches)190 x 415 mm (7.5 x 16.3 inches)280 x 275 mm (11 x 10.8 inches)305 x 254 mm (12 x 10 inches)
Get InfoNot AvailableNot AvailableInquireNot AvailableNot Available
-->