Dental adhesives can be broadly broken up into four categories: universal, total-etch, self-etch and selective-etch. These terms refer to the technique used with the dental adhesive, which also are referred to as bonding agents. Universal dental adhesives are formulated to work with all three etching techniques. Dental adhesives may be self-cure, light-cure or dual cure, curing times vary between products but are usually under 30 seconds. Solvents differ based on dental adhesive formulas but are usually water, ethanol or acetone. When choosing a dental adhesive some factors to take into account are incidence of post-operative sensitivity, bond strength, ease of use and workability as well as compatibility with resin cement systems. Also be sure to select the best dental adhesive for the procedure, for example, an enamel procedure is best suited by a total-etch adhesion, whereas a largely dentin preparation may be better serviced by a self-etching adhesion. Research the best dental adhesive for your specific needs.
Select up to 5 products from below to compare or request more information.
- Tensile Bond Strength: 38 Mpa
- Curing Time: Not Available
- Solvent: Water
Not Available
DRM Research Laboratories
- Tensile Bond Strength: Bond Strength Dentin - 37 MPa
Bond Strength Enamel - 27 MPa
Bond Composite - 34 MPa
Bond Porcelain - 30 MPa
Bond Gold Alloys - 23 MPa
Bond Titanium - 27 MPa
Bond Cobalt-Chrome - 28 MPa - Curing Time: Not Available
- Solvent: Not Available
Not Available
- Tensile Bond Strength: 32 MPa - Enamel
29 MPa - Dentin - Curing Time: 3 - 10 seconds
- Solvent: Acetone
Not Available
- Tensile Bond Strength: 20 MPa - Enamel
14 - 20 MPa - Dentin - Curing Time: 10 seconds
- Solvent: Alcohol
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: 20 seconds
- Solvent: Not Available
Not Available
- Tensile Bond Strength: 18.6 MPa (Enamel)
20.8 MPa (Dentin) - Curing Time: 10 - 20 seconds
- Solvent: Ethanol
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: 10 seconds
- Solvent: Water
Organic Solvents
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Ethanol
Not Available
- Tensile Bond Strength: 28 MPa
- Curing Time: 10 seconds
- Solvent: Ethanol
Not Available
- Tensile Bond Strength: 12 MPa
- Curing Time: Not Available
- Solvent: Acetone
Not Available
- Tensile Bond Strength: 52.8 MPa
- Curing Time: 10 seconds
- Solvent: Not Available
Not Available
- Tensile Bond Strength: 47.6 MPa
- Curing Time: 10 seconds
- Solvent: Water
Ethanol
Acetone
Not Available
- Tensile Bond Strength: Dentin : 31.4 MPa
Enamel : 32.5 MPa - Curing Time: 20 seconds
- Solvent: Water
Ethanol
Not Available
- Tensile Bond Strength: 35 MPa
- Curing Time: 20 seconds
- Solvent: Water
Alcohol
Ethanol
Not Available
- Tensile Bond Strength: Dentin : 31.8 MPa
UnCut Enamel : 38.1 Mpa - Curing Time: 10 seconds
- Solvent: Water
Ethanol
Acetone
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: 20 seconds
- Solvent: Ethanol
Water
Not Available
- Tensile Bond Strength: 45 MPa
- Curing Time: Not Available
- Solvent: Acetone
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: 20 seconds
- Solvent: Not Available
Not Available
- Tensile Bond Strength: 20 MPa
- Curing Time: 5 - 10 seconds
- Solvent: Water
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Water
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Ethanol
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Ethanol
Not Available
- Tensile Bond Strength: > 20 MPa
- Curing Time: 10 seconds
- Solvent: Water
Ethanol
Not Available
- Tensile Bond Strength: 20 - 25 MPa
- Curing Time: 10 seconds
- Solvent: Water
Not Available
- Tensile Bond Strength: 25 - 30 MPa
- Curing Time: 10 seconds
- Solvent: Water
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Not Available
Not Available
- Tensile Bond Strength: 24 Mpa
- Curing Time: Not Available
- Solvent: Not Available
Not Available
- Tensile Bond Strength: 31 Mpa
- Curing Time: 10 seconds
- Solvent: Water
Not Available
- Tensile Bond Strength: 30.4 MPa
- Curing Time: 10 Seconds
- Solvent: None
Not Available
- Tensile Bond Strength: 29.4 Mpa
- Curing Time: 10 seconds (Light)
- Solvent: Acetone
Not Available
Select up to 5 products from above to compare or request more information.
Tags:
Please Login or Register to Create Tags