Dental adhesives can be broadly broken up into four categories: universal, total-etch, self-etch and selective-etch. These terms refer to the technique used with the dental adhesive, which also are referred to as bonding agents. Universal dental adhesives are formulated to work with all three etching techniques. Dental adhesives may be self-cure, light-cure or dual cure, curing times vary between products but are usually under 30 seconds. Solvents differ based on dental adhesive formulas but are usually water, ethanol or acetone. When choosing a dental adhesive some factors to take into account are incidence of post-operative sensitivity, bond strength, ease of use and workability as well as compatibility with resin cement systems. Also be sure to select the best dental adhesive for the procedure, for example, an enamel procedure is best suited by a total-etch adhesion, whereas a largely dentin preparation may be better serviced by a self-etching adhesion. Research the best dental adhesive for your specific needs.
Select up to 5 products from below to compare or request more information.
- Tensile Bond Strength: Not Available
- Curing Time: 10 seconds
- Solvent: Ethanol
- Tensile Bond Strength: Not Available
- Curing Time: 10 seconds
- Solvent: Ethanol
- Tensile Bond Strength: 25 ± 7 MPa
- Curing Time: 10 seconds
- Solvent: Water
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Acetone
Not Available
- Tensile Bond Strength: 20 Mpa
- Curing Time: 10 to 15 seconds - Allow to fully evaporate
Not Available
- Tensile Bond Strength: 31 to 34 MPa
- Curing Time: 5 seconds (Sapphire Plasma Arc Curing Light); 10 seconds with Phase II High-Speed Halogen Lights; 30 seconds with conventional curing lights
- Solvent: Not Available
Not Available
- Tensile Bond Strength: Unetched Enamel : 3502 psi ± 279 Unetched Dentin : 3650psi ± 277 Etched Enamel : 3341psi ± 542 Etched Dentin : 3008psi ± 606
- Curing Time: 5 seconds with Sapphire Plasma Arc Curing Light
10 seconds with Phase II High-Speed Halogen Lights
30 seconds with conventional curing lights - Solvent: Acetone
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: 10 to 15 seconds, allow to fully evaporate
- Solvent: Ethanol and Acetone
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: LED: 5 seconds
Halogen: 10 seconds - Solvent: Acetone
Not Available
- Tensile Bond Strength: 20.3 Mpa
- Curing Time: 10 seconds
- Solvent: Adhesive Monomer
Not Available
- Tensile Bond Strength: RE-GEN™ Universal - 35 MPa (dentin) and 33 MPa (enamel)
RE-GEN™ Self-Etch - 55 MPa (dentin) and 52 MPa(enamel) - Curing Time: 10 seconds
- Solvent: RE-GEN™ Universal (ethanol, acetone and water); RE-GEN™ Self-Etch (water, ethanol and acetone)
- Tensile Bond Strength: 35.7 MPa
- Curing Time: 20 seconds
- Solvent: Ethyl Alcohol
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: 10 - 20 seconds
- Solvent: Ethanol (Primer)
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Ethyl Alcohol
Not Available
- Tensile Bond Strength: 40 Mpa
- Curing Time: 30 seconds
- Solvent: Not Available
- Tensile Bond Strength: Enamel : 24 Mpa
Dentin : 27 MPa - Curing Time: 10 seconds
- Solvent: Ethanol
Water
Not Available
- Tensile Bond Strength: 25 - 30 MPa
- Curing Time: 10 seconds
- Solvent: Water
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: 10 seconds
- Solvent: Ethanol
Water
Not Available
- Tensile Bond Strength: 45 MPa
- Curing Time: 10 seconds
- Solvent: Ethanol
Water
Not Available
- Tensile Bond Strength: 24 MPa
- Curing Time: Not Available
- Solvent: Not Available
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: 20 seconds (Light)
- Solvent: Not Available
Not Available
Dentsply Sirona Restorative
- Tensile Bond Strength: Not Available
- Curing Time: 10 seconds
- Solvent: Acetone
Water
Not Available
Dentsply Sirona Restorative
- Tensile Bond Strength: 25 MPa
- Curing Time: 10 - 20 seconds (Light)
- Solvent: Acetone
Water
Not Available
Dentsply Sirona Restorative
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Acetone
Not Available
Dentsply Sirona Restorative
- Tensile Bond Strength: Not Available
- Curing Time: 10 seconds
- Solvent: Glutaraldehyde
Not Available
Dentsply Sirona Restorative
- Tensile Bond Strength: Not Available
- Curing Time: 10 seconds
- Solvent: Not Available
Not Available
Dentsply Sirona Restorative
- Tensile Bond Strength: >25 MPa
- Curing Time: 10 seconds
- Solvent: Water
Not Available
Dentsply Sirona Restorative
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Butanol
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Not Available
Not Available
- Tensile Bond Strength: Not Available
- Curing Time: Not Available
- Solvent: Not Available
Not Available
Select up to 5 products from above to compare or request more information.
Tags:
Please Login or Register to Create Tags