Dental adhesives can be broadly broken up into three categories: total-etch, self-etch and selective-etch. These terms refer to the technique used with the dental adhesive. There are also universal dental adhesives that are formulated to work with all three techniques; universal dental adhesives are relatively new to the dental adhesive market. Dental adhesives may be self-cure, light-cure or dual cure, curing times vary between products but are usually under 30 seconds. Solvents differ based on dental adhesive formulas but are usually water, ethanol or acetone. When choosing a dental adhesive some factors to take into account are incidence of post-operative sensitivity, bond strength, ease of use and workability as well as compatibility with resin cement systems. Also be sure to select the best dental adhesive for the procedure, for example, an enamel procedure is best suited by a total-etch adhesion, whereas a largely dentin preparation may be better serviced by a self-etching adhesion. Research the best dental adhesive for your specific needs.
Get Info For All Products
Select up to 5 products from below to compare or request more information.
- Curing Time: LED: 5 seconds
Halogen: 10 seconds - Solvent: Acetone
- Curing Time: 10 seconds
- Solvent: Ethanol
- Curing Time: 10 seconds (Light)
- Solvent: Ethanol
- Curing Time: 20 seconds
- Solvent: Acetone
Ethanol
- Tensile Bond Strength: Inquire
- Curing Time: 10 - 15 seconds
- Solvent: Ethanol
- Curing Time: 10 seconds
- Solvent: Acetone
- Curing Time: 10 - 15 seconds
- Solvent: Acetone
- Tensile Bond Strength: Inquire
- Curing Time: 10 seconds
- Solvent: Inquire
- Tensile Bond Strength: Inquire
- Curing Time: 10 seconds
- Solvent: Methacryl Phosphate
- Tensile Bond Strength: 20 Mpa
- Curing Time: 5 - 30 seconds
- Tensile Bond Strength: 31 - 34 MPa
- Curing Time: 5 - 30 seconds
- Tensile Bond Strength: Unetched Enamel : 3502 psi ± 279
Unetched Dentin : 3650psi ± 277
Etched Enamel : 3341psi ± 542
Etched Dentin : 3008psi ± 606
- Curing Time: 5 - 30 seconds
- Solvent: Water
Acetone
- Curing Time: 5 - 30 seconds
- Tensile Bond Strength: 52.8 MPa
- Curing Time: 10 seconds
- Tensile Bond Strength: 47.6 MPa
- Curing Time: 10 seconds
- Solvent: Water
Ethanol
Acetone
- Tensile Bond Strength: Dentin : 31.4 MPa
Enamel : 32.5 MPa - Curing Time: 20 seconds
- Solvent: Water
Ethanol
- Tensile Bond Strength: 35 MPa
- Curing Time: 20 seconds
- Solvent: Water
Alcohol
Ethanol
- Tensile Bond Strength: Dentin : 31.8 MPa
UnCut Enamel : 38.1 Mpa - Curing Time: 10 seconds
- Solvent: Water
Ethanol
Acetone
- Tensile Bond Strength: 20.3 Mpa
- Curing Time: 10 seconds
- Solvent: Adhesive Monomer
- Tensile Bond Strength: 35.7 MPa
- Curing Time: 20 seconds
- Solvent: Ethyl Alcohol
- Curing Time: 10 - 20 seconds
- Solvent: Ethanol (Primer)
- Tensile Bond Strength: Inquire
- Curing Time: Inquire
- Solvent: None
- Tensile Bond Strength: Inquire
- Curing Time: 10 seconds
- Solvent: None
- Tensile Bond Strength: Inquire
- Curing Time: N/A
- Solvent: Inquire
Select up to 5 products from above to compare or request more information.
Tags:
Please Login or Register to Create Tags