Dental Air Abrasion Equipment (Intraoral Abrasion Units)

Dental air abrasion units (intraoral abrasion units) are used for cavity detection and treatment. These units are often favored in pediatric dentistry, as anesthesia is not often needed and there is no noise or vibration. Intraoral abrasion systems perform a variety of functions including cutting, polishing, cleaning and drying. They can be attached to a current handpiece or can be a self-contained unit. A dental air abrasion handpiece attachment can be a good choice if there are budget constraints. Most dental air abrasion units use aluminum oxide or glass beads for an abrasion medium with sodium bicarbonate for lighter work like polishing. Compressed air is necessary for dental air abrasion units and average power for these systems ranges between 40-100 psi. Some vendors offer the addition of a water stream to the air abrasive flow, this can enhance patient comfort. A variety of nozzle tip sizes and angles are available for various procedures. Be sure to choose a reputable vendor who offers impeccable customer service.

Get Info For All Products
Select up to 5 products from below to compare or request more information.
Compare or Get Info for selected.
MicroEtcher II Sandblaster

MicroEtcher II Sandblaster

Danville Materials

  • Air Source: 3 m (10 foot) Air Line
  • Evacuation: High Speed Suction
  • Portability: Yes
Compare or Get Info for selected.
MicroEtcher IIA Intraoral Sandblaster
  • Air Source: 2.74 m (9 foot) Air Line
Compare or Get Info for selected.
PrepStart H2O Hydro Abrasion Cavity Prep Unit
  • Air Source: N/A
  • Evacuation: N/A
  • Portability: N/A
Compare or Get Info for selected.
RONDOflex plus 360 Dental Air Abrasion Equipment
  • Evacuation: No Integrated Evacuation
    Used with Delivery System Evacuation
  • Portability: Yes
Compare for selected.
MicroEtcher ERC Sandblaster

MicroEtcher ERC Sandblaster

Danville Materials

  • Air Source: 3 m (10 foot) Air Line
  • Evacuation: High Speed Suction
  • Portability: Yes
Compare for selected.
Microetcher S-2

Microetcher S-2

Danville Materials

  • Air Source: 12' lines
  • Portability: Yes
Inquire
Compare for selected.
Microprophy 2 Air Polisher

Microprophy 2 Air Polisher

Danville Materials

  • Portability: Yes
Compare for selected.
Power Plus Air Booster

Power Plus Air Booster

Danville Materials

  • Air Source: 60 psi
  • Evacuation: N/A
  • Portability: N/A
Compare for selected.
PrepAir Handheld Air Abrasion Unit
  • Air Source: .25 inch Dental Disconnect Fitting
  • Evacuation: High Speed Suction
  • Portability: Yes
Compare for selected.
PrepStart H2O Abrasion Cavity Prep
Compare for selected.
PrepStartTAir Abrasion System

PrepStartTAir Abrasion System

Danville Materials

  • Air Source: House Air
  • Portability: Yes
Compare for selected.
AirTouch Air Cavity Detection and Treatment System
  • Air Source: 1/3 hp Compressor / CO2 Tank
  • Evacuation: Powder Touch On-Board Evacuation System
Compare for selected.
PrepMaster Air Abrasion Device
  • Air Source: Free-flow HP Connector
  • Portability: Yes
Inquire
Compare for selected.
AeroEtcher Intraoral Blaster
  • Air Source: Intra-oral Air-blaster
  • Portability: Yes
Compare for selected.
Air-Flow Prep K1 Max  Air Abrasion Device
  • Air Source: A Precise Jet of Air Through Pure Temperate Water
  • Evacuation: Automatic Purge
  • Portability: Portable
Inquire
Compare for selected.
AquaCut Quattro Fluid Abrasion System
  • Air Source: Operatory compressed air
Select up to 5 products from above to compare or request more information.

Tags:

Please Login or Register to Create Tags
Note: Dentalcompare disclaims any information on this site. Price information is approximate list price and actual prices may vary.