News

Filter

Show All

3D Cone Beam Imaging(7)Assessment / Diagnostic Tools(1)CAD / CAM Blocks(4)CAD / CAM Materials(5)CAD/CAM Bur Set(1)Combination Ceramic Systems(1)Dental CAD/CAM(14)Dental Cameras(1)Dental Diode Laser(1)Dental Implants(1)Dental Lab CAD/CAM Systems(4)Dental Lasers(2)Dental Masks - Cone(1)Dental Software(1)Digital Imaging(5)Digital Impression Systems(9)Digital Pan / Ceph X-ray(2)Digital Radiography(9)Digital X-ray Sensors(3)DISABLED - Dental Digital Imaging Systems(1)DISABLED - Digital X-Ray Systems(1)Endodontic Electric Motors(1)Endodontic Equipment(1)Endosseous Implant Systems(2)Equipment(17)Gingival Retraction and Isolation(1)Gingival Retraction Cord and Caps(1)Hygiene(1)Implant Surgical Guide Systems(1)Indirect Restorations(1)Intraoral Cameras(1)Lab Products(3)Laboratory Materials(2)Luting and Bonding Systems(2)Materials(5)Operatory Equipment(12)Oral Surgery(1)Periodontics(2)Polyether Impression Materials(1)Removable Prosthodontics(1)Resin Cements(1)Self Adhesive Resin Cements(1)Shade Equipment(1)Software(1)Stainless Steel Crowns(1)Tooth Shade Guide(1)Transparent Strip Crown Forms(1)VPS Impression Material(1)X-ray Generators(1)

Sort

Complementary Digital Technologies
Friday, November 20, 2009
Cadent's iTero and Sirona's CEREC combine for outstanding efficiency, accuracy, fit, and esthetics. read more
Why Digital Impressions? Accuracy and Productivity.
Tuesday, March 24, 2009
This article will discuss the cost comparison of conventional impressions to that of digital impressions using the Cadent iTero system. read more
VITA Machinable Ceramics
Thursday, June 19, 2008
With respect to crowns, Vitablocs Mark II has success rates of about 94% even after seven years as compared to Procad/Empress CAD (75%) and MZ100 (55%... read more
Global Esthetics - Dr. Alessandro Devigus
Tuesday, June 10, 2008
Dr. Alessandro Devigus (Europe) shares his perspective on the current state-of-the-art in dental esthetics and what the future may hold. read more
Dental Impressions Go Digital
Thursday, April 10, 2008
Just about everything in your practice has gone digital. But impressions? Actually, yes. read more
How CAD/CAM Technology is Changing the Face of Esthetic Dentistry
Wednesday, October 31, 2007
Over the past decade, conventional procedures for the laboratory fabrication of ceramic restorations have been augmented with new materials and ... read more
Sirona SIROLaser: A Versatile Diode Laser
Wednesday, July 05, 2006
The SIROLaser is much more compact than comparable diode lasers, while providing optimum performance in periodontal, surgical, and endodontic ... read more
SIROLaser
Tuesday, April 25, 2006
Sirona has introduced the SIROLaser, a compact diode laser. Just what you have come to expect over the years from the world’s only full-range supplier... read more
inLab CAD/CAM System
Thursday, January 26, 2006
The Sirona inLab is a CAD/CAM unit designed to fabricate all-ceramic inlays, onlays, copings, crowns and 3-unit fixed partial denture substructures. read more
Heliodent DS Mobile X-ray Unit
Thursday, January 05, 2006
The Heliodent DS consists of a tubehead, position-indicating device, extension arm, and control panel that are mounted vertically to a framed ... read more
Chairside Economical Restoration of Esthetic Ceramic (CEREC)
Tuesday, May 10, 2005
Whenever a patient needs a restorative procedure involving work done with the laboratory, there is always that requisite time with a provisional ... read more