The VITA In-Ceram line of restorative materials has been expanded with the addition of new VITA In-Ceram YZ DISC Color and VITA In-Ceram YZ DISC HT (High Translucent).
The precolored YZ DISC Color are fabricated with a controlled coloring process for uniform shade that is designed to eliminate the need for manual coloring, according to a press release. The discs are available in light, medium and intense shade variations, and VITA Coloring Liquid can be used to add additional subtle shading.
The VITA YZ DISC HT is designed for use in fabrication of full-contour restorations. The material is translucent enough to be milled for use without additional veneering.
Both new discs are compatible with open architecture milling systems capable of accepting 98 mm diameter discs with heights of either 14 mm or 18 mm.
View Full Press Release
VITA IN-CERAM® YZ AVAILABLE IN TWO NEW DISCS
SHADED AND TRANSLUCENT OPTIONS FOR IDEAL ESTHETICS
Leading the industry with quality products and superior technical support, VITA announces two new products for its proven VITA In-Ceram restorative materials – VITA In-Ceram YZ DISC Color and VITA In-Ceram YZ DISC HT (High Translucent).
Available in precolored, monochromatic shades, The VITA YZ Disc Color utilizes a controlled coloring process, producing a uniform quality of shades and eliminating the need for time-consuming and mistake-prone manual coloring. For ideal color matching, three shade variations are available: light, medium and intense. If needed, additional coloring with VITA Coloring Liquid can be used for more subtle shade variations.
The VITA YZ Disc HT is perfect for the efficient fabrication of fully anatomical restorations, thanks to the addition of a highly translucent material that is distinguished by natural light refraction properties. VITA YZ Disc HT offers a relatively inexpensive, yet attractive alternative to non-veneered or partially-veneered metal restorations. Due to the high level of translucency, veneering is not required.
Both products can be processed in all open CAD/CAM systems that can accept discs with a diameter of 98 mm and heights of 14 mm and 18 mm.