Stone Hardeners and Glazes

Stone hardeners and glazes are used to create sturdier dental models and to protect them after they have been poured. Whether applied during the gypsum mixing process such as in the case of hardeners, or painted on after the model has been poured as in the case of glazes, these materials make dental models stronger and more able to hold up and retain their accuracy while being used to fabricate a dental restoration. When using a hardener, be sure to apply the proper mix with the gypsum. When using a glaze be sure to apply a thin, even layer in order to maintain the model's proper dimensions.
CompanyGeorge Taub ProductsAmerican Dental Supply, Inc.Whip Mix CorporationWhip Mix Corporation
ItemStone Die and Plaster HardenerClear-Coat and Model HardnerGypsum HardenerModel Glow Model Soap
PriceInquireInquireInquireInquire
DescriptionA liquid plastic applied to any stone die, plaster or stone model. Impregnates stone—sets in 3 - 5 min. Does not effect dimensions of die. WaterproofsProvides instant protection for stone models and die materials. Penetrates dies and creates a clear, hard, glossy, tough surface. Prevents abrasion Replaces water as the gauging liquid for mixing with gypsum materials where increased hardness and reduced brittleness are desired; will also improve MODEL GLOW gives an incredibly high luster to gypsum models. Its special formulation does not yellow or flake and seals the pores to provide a
QuantityStandard Kit:
2 ounces Liquid Resin and 2 ounces Thinner
Special Kit:
8 ounces Liquid Resin and 8 ounces Thinner
16 ounces Liquid Resin and 16 ounces Thinner
32 ounces Liquid Resin and 32 ounces Thinner
Individual Resin:
2 ounces Resin Bottle
8 ounces (1/2 pint) Can
16 ounces (1 pint) Can
32 ounces (quart) Can
Individual Thinners:
2 ounces Thinner Bottle
8 ounces Thinner Can
16 ounces Thinner Can
32 ounces Thinner Can		113 g (4 ounces) Model Hardener
118 mL (4 ounces) Solvent		450 mL (1 pint) Bottle
3.75 L (1 gallon) Container
15 L (4 gallon) Case		3.75 L (1 gallon) Container
15 L (4 gallon) Case
ApplicationImpregnates StoneProtection for stone models and die materials (penetrates dies and creates a clear, hard, glossy, tough surface).Water SubsituteModel Glow provides a protective coating by soaking the model and then buffing to a high gloss.
Get InfoNot AvailableNot AvailableNot AvailableNot Available
-->