Stone hardeners and glazes are used to create sturdier dental models and to protect them after they have been poured. Whether applied during the gypsum mixing process such as in the case of hardeners, or painted on after the model has been poured as in the case of glazes, these materials make dental models stronger and more able to hold up and retain their accuracy while being used to fabricate a dental restoration. When using a hardener, be sure to apply the proper mix with the gypsum. When using a glaze be sure to apply a thin, even layer in order to maintain the model's proper dimensions.
Select up to 5 products from below to compare or request more information.
American Dental Supply, Inc.
- Quantity: 113 g (4 ounces) Model Hardener
118 mL (4 ounces) Solvent - Application: Protection for stone models and die materials (penetrates dies and creates a clear, hard, glossy, tough surface).
Not Available
- Quantity: Standard Kit:
2 ounces Liquid Resin and 2 ounces Thinner
Special Kit:
8 ounces Liquid Resin and 8 ounces Thinner
16 ounces Liquid Resin and 16 ounces Thinner
32 ounces Liquid Resin and 32 ounces Thinner
Individual Resin:
2 ounces Resin Bottle
8 ounces (1/2 pint) Can
16 ounces (1 pint) Can
32 ounces (quart) Can
Individual Thinners:
2 ounces Thinner Bottle
8 ounces Thinner Can
16 ounces Thinner Can
32 ounces Thinner Can - Application: Impregnates Stone
Not Available
- Quantity: 450 mL (1 pint) Bottle
3.75 L (1 gallon) Container
15 L (4 gallon) Case - Application: Water Subsitute
Not Available
- Quantity: 3.75 L (1 gallon) Container
15 L (4 gallon) Case - Application: Model Glow provides a protective coating by soaking the model and then buffing to a high gloss.
Not Available
Select up to 5 products from above to compare or request more information.
Tags:
Please Login or Register to Create Tags