Investment Materials

Dental investment materials are used to encase the wax designed for the lost wax casting technique. These materials are usually available as a powder that is mixed with water and then used to encase the wax design. These materials solidify and can withstand the heat of the casting furnace to hold the precise shape left behind when the wax is burned out. Different gypsums are designed for use with different dental alloys or other materials, so be sure to select the proper gypsum for the case at hand.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemPolyvest Refractory Die MaterialCeramigold Investment with CarbonFastFire 15 Phosphate InvestmentFormula 1 Universal InvestmentPC 15 Phosphate Bonded Investment
PriceInquireInquireInquireInquireInquire
DescriptionPOLYVEST Refractory Die Material is formulated with a coefficient of thermal expansion to closely match today's newer porcelains. With its controlled This phosphate investment contains carbon for bright, gold-colored castings. Expansion can be controlled to fit your needs -- yet technic is easy to FASTFIRE 15 is a fine grain phosphate investment which requires only a 15 minute benchset before placing molds into a hot oven for rapid burnout. It This high-performance, universal investment works equally well for all alloys and pressable ceramics. Its wide expansion range allows the technician PC15 is a fine grained phosphate bonded investment for pressable ceramics. Its creamy consistency pours easily when investing and produces smooth
Quantity24 - 60 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		144 - 90 g Package
144 - 60 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		100 - 90 g Package
150 - 60 g Package
25 - 90 g Package
25 - 60 g Package
340 mL Bottle
1 L Bottle
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
9 kg (2 pounds) Carton		4 - 2.5 kg Package
100 - 100 g Package
150 - 60 g Package
50 - 100 g Package
50 - 60 g Package
40 - 150 g Package
340 mL Bottle
1 L Bottle
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles		25 - 100 g Package
100 - 100 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle
Compressive StrengthWet - 6,000 psi (42 MPa)
Dry - 6,500 psi (48 MPa)		Wet - 1,500 psi (10 MPa)Wet - 500 psi (3.4 MPa)Wet - 1.350 psi (9.2 MPa)Wet - 500 psi (3.4 MPa)
Working Time2 minutes6 - 7 minutes7 - 9 minutes6 - 8 minutes7 - 9 minutes
Material TypeRefractory Die MaterialPhosphate Bonded InvestmentFine Grain PhosphatePhosphate Bonded InvestmentFine Grain Phosphate Bonded Investment
Indication For UseRefractory Investment - Direct Firing CeramicsCrown and Bridge and Ceramic Gold AlloysUniversal Phosphate Investment for All Crown and Bridge AlloysUniversal Investment for All Alloys and Pressable CeramicsPressable Ceramics
Liquid / Powder Ratio22 mL / 100 g16 mL /100 g27 mL / 100 g22 mL / 100 g27 mL / 100 g
Setting Expansion0.8 %0.7 %1 %1.6 %1 %
Ready For BurnoutNot Available60 minutes15 minutes15 minutes15 minutes
Hygroscopic ExpansionN / AN / AN / AN / AN / A
Thermal Expansion500° C, 2nd firing - 0.65%1.2 %1.0 %0.65 %0.7 %
Metal or Ringless TechniqueN / AMetal or RinglessMetal or RinglessMetal or RinglessMetal or Ringless
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->