Investment Materials

Dental investment materials are used to encase the wax designed for the lost wax casting technique. These materials are usually available as a powder that is mixed with water and then used to encase the wax design. These materials solidify and can withstand the heat of the casting furnace to hold the precise shape left behind when the wax is burned out. Different gypsums are designed for use with different dental alloys or other materials, so be sure to select the proper gypsum for the case at hand.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemPowerCast Phosphate InvestmentCeramigold Investment with CarbonCristobalite Investment MaterialFastFire 15 Phosphate InvestmentNovocast Investment Material
PriceInquireInquireInquireInquireInquire
DescriptionA carbon-free, fine-grain phosphate bonded investment for casting crown and bridge and ceramic alloys. This versatile all-purpose investment has been This phosphate investment contains carbon for bright, gold-colored castings. Expansion can be controlled to fit your needs -- yet technic is easy to The principal ingredient, CRISTOBALITE, gives high thermal expansion, even at comparatively low temperatures. It is possible to use the same creamy FASTFIRE 15 is a fine grain phosphate investment which requires only a 15 minute benchset before placing molds into a hot oven for rapid burnout. It NOVOCAST is an advanced inlay investment that provides increased accuracy for casting conventional gold alloys at a mold temperature of 650 degrees C
Quantity9 kg (20 pounds) Carton
150 - 60 g Package
100 - 90 g Package
6 Pack - 340 mL Bottles
6 Pack - 1L Bottles
340 mL Bottle
1 L Bottle		144 - 90 g Package
144 - 60 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		144 - 50 g Package100 - 90 g Package
150 - 60 g Package
25 - 90 g Package
25 - 60 g Package
340 mL Bottle
1 L Bottle
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
9 kg (2 pounds) Carton		9 kg (20 pounds) Carton
24 - 50 g Package
24 - 75 g Package
144 - 50 g Package
144 - 75 g Package
Compressive StrengthWet - 700 psi (5 MPa)Wet - 1,500 psi (10 MPa)Wet - 700 psi (5 MPa)Wet - 500 psi (3.4 MPa)Wet - 950 psi (7 MPa)
Working Time8 - 9 minutes6 - 7 minutes3 minutes7 - 9 minutes3 minutes
Set TimeNot AvailableNot Available16 minutesNot Available15 minutes
Material TypeCarbon-free, Fine-grain Phosphate-bonded InvestmentPhosphate Bonded InvestmentGypsum Bonded InvestmentFine Grain PhosphateGypsum Bonded Investment
Indication For UseCasting Crown and Bridge and Ceramic AlloysCrown and Bridge and Ceramic Gold AlloysLow Fusing Crown and Bridge AlloysUniversal Phosphate Investment for All Crown and Bridge AlloysLow Fusing Crown and Bridge Alloys
Liquid / Powder Ratio23 mL / 100 g16 mL /100 g30 mL / 100 g27 mL / 100 g34 mL / 100 g
Setting Expansion0.8 %0.7 %0.5 %1 %0.45 %
Ready For Burnout45 minutes60 minutes30 minutes15 minutes30 minutes
Hygroscopic ExpansionN / AN / ANot AvailableN / AN / A
Thermal Expansion1 %1.2 %650º C (1,200º F) - 1.25 %1.0 %650° C - 1.20 %
Metal or Ringless TechniqueMetal or RinglessMetal or RinglessMetal OnlyMetal or RinglessMetal Only
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->