Investment Materials

Dental investment materials are used to encase the wax designed for the lost wax casting technique. These materials are usually available as a powder that is mixed with water and then used to encase the wax design. These materials solidify and can withstand the heat of the casting furnace to hold the precise shape left behind when the wax is burned out. Different gypsums are designed for use with different dental alloys or other materials, so be sure to select the proper gypsum for the case at hand.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemHi Temp Carbon-Free InvestmentNovocast Investment MaterialPC 15 Phosphate Bonded InvestmentPowerCast Phosphate InvestmentV.H.T. Refractory Investment
PriceInquireInquireInquireInquireInquire
DescriptionA special investment for non-precious and semi-precious alloys. HI-TEMP contains no carbon. Non-precious metal alloys require an investment specially NOVOCAST is an advanced inlay investment that provides increased accuracy for casting conventional gold alloys at a mold temperature of 650 degrees C PC15 is a fine grained phosphate bonded investment for pressable ceramics. Its creamy consistency pours easily when investing and produces smooth A carbon-free, fine-grain phosphate bonded investment for casting crown and bridge and ceramic alloys. This versatile all-purpose investment has been One of the most useful and efficient laboratory materials available today, V.H.T. is an extremely fine-grained phosphate investment with an ample
Quantity144 - 90 g Package
144 - 60 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		9 kg (20 pounds) Carton
24 - 50 g Package
24 - 75 g Package
144 - 50 g Package
144 - 75 g Package		25 - 100 g Package
100 - 100 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		9 kg (20 pounds) Carton
150 - 60 g Package
100 - 90 g Package
6 Pack - 340 mL Bottles
6 Pack - 1L Bottles
340 mL Bottle
1 L Bottle		24 - 60 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle
Compressive StrengthWet - 1,500 psi (10 MPa)Wet - 950 psi (7 MPa)Wet - 500 psi (3.4 MPa)Wet - 700 psi (5 MPa)Wet - 2,500 psi (17 MPa)
Dry - 4,800 psi (34 MPa)
Working Time7 - 8 minutes3 minutes7 - 9 minutes8 - 9 minutes4 - 5 minutes
Set TimeNot Available15 minutesNot AvailableNot AvailableNot Available
Material TypeCarbon-Free Phosphate BondedGypsum Bonded InvestmentFine Grain Phosphate Bonded InvestmentCarbon-free, Fine-grain Phosphate-bonded InvestmentRefractory Die Material
Indication For UseHigh Fusing AlloysLow Fusing Crown and Bridge AlloysPressable CeramicsCasting Crown and Bridge and Ceramic AlloysDirect Firing Ceramics
Liquid / Powder Ratio16 mL / 100 g34 mL / 100 g27 mL / 100 g23 mL / 100 g19 mL / 100 g
Setting Expansion0.7 %0.45 %1 %0.8 %0.3 %
Ready For Burnout60 minutes30 minutes15 minutes45 minutesNot Available
Hygroscopic ExpansionN / AN / AN / AN / AN / A
Thermal Expansion1.2 %650° C - 1.20 %0.7 %1 %500° C, 2nd Firing - 0.8 %
Metal or Ringless TechniqueMetal or RinglessMetal OnlyMetal or RinglessMetal or RinglessN / A
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->