Investment Materials

Dental investment materials are used to encase the wax designed for the lost wax casting technique. These materials are usually available as a powder that is mixed with water and then used to encase the wax design. These materials solidify and can withstand the heat of the casting furnace to hold the precise shape left behind when the wax is burned out. Different gypsums are designed for use with different dental alloys or other materials, so be sure to select the proper gypsum for the case at hand.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemFastFire 15 Phosphate InvestmentPC 15 Phosphate Bonded InvestmentPolyvest Refractory Die MaterialPowerCast Phosphate InvestmentResinVest
PriceInquireInquireInquireInquireInquire
DescriptionFASTFIRE 15 is a fine grain phosphate investment which requires only a 15 minute benchset before placing molds into a hot oven for rapid burnout. It PC15 is a fine grained phosphate bonded investment for pressable ceramics. Its creamy consistency pours easily when investing and produces smooth POLYVEST Refractory Die Material is formulated with a coefficient of thermal expansion to closely match today's newer porcelains. With its controlled A carbon-free, fine-grain phosphate bonded investment for casting crown and bridge and ceramic alloys. This versatile all-purpose investment has been Designed for burning out printed or milled resin patterns for crowns, bridges, or frameworks, ResinVest is a fiber-reinforced material that resists
Quantity100 - 90 g Package
150 - 60 g Package
25 - 90 g Package
25 - 60 g Package
340 mL Bottle
1 L Bottle
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
9 kg (2 pounds) Carton		25 - 100 g Package
100 - 100 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		24 - 60 g Package
6 Pack - 340 mL Bottles
6 Pack - 1 L Bottles
340 mL Bottle
1 L Bottle		9 kg (20 pounds) Carton
150 - 60 g Package
100 - 90 g Package
6 Pack - 340 mL Bottles
6 Pack - 1L Bottles
340 mL Bottle
1 L Bottle		100 g Package; 55 lbs. Carton
Compressive StrengthWet - 500 psi (3.4 MPa)Wet - 500 psi (3.4 MPa)Wet - 6,000 psi (42 MPa)
Dry - 6,500 psi (48 MPa)		Wet - 700 psi (5 MPa)1,350 psi (9.2 MPa)
Working Time7 - 9 minutes7 - 9 minutes2 minutes8 - 9 minutes6 to 8 Minutes
Set TimeNot AvailableNot AvailableNot AvailableNot Available30 Minutes Minimum
Material TypeFine Grain PhosphateFine Grain Phosphate Bonded InvestmentRefractory Die MaterialCarbon-free, Fine-grain Phosphate-bonded InvestmentPhosphate Investment
Indication For UseUniversal Phosphate Investment for All Crown and Bridge AlloysPressable CeramicsRefractory Investment - Direct Firing CeramicsCasting Crown and Bridge and Ceramic AlloysBurning out milled or printed resin patterns
Liquid / Powder Ratio27 mL / 100 g27 mL / 100 g22 mL / 100 g23 mL / 100 g22 ml/100 g
Setting Expansion1 %1 %0.8 %0.8 %1.6 Percent
Ready For Burnout15 minutes15 minutesNot Available45 minutesYes
Hygroscopic ExpansionN / AN / AN / AN / ANot Available
Thermal Expansion1.0 %0.7 %500° C, 2nd firing - 0.65%1 %0.65 Percent
Metal or Ringless TechniqueMetal or RinglessMetal or RinglessN / AMetal or RinglessBoth
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->