Lab Gypsum Materials

Dental lab gypsum materials are used to create highly accurate model from a physical impression of a patient's teeth. The models are fabricated by pouring the gypsum material into the impression and allowing it to harden. There are a wide range of gypsums used in dentistry with different properties depending on how the models will be used. Some gypsums are ideal for use in sectioned models and dies, others are designed to be scanned for use in CAD/CAM dentistry, while other model materials are designed for use in vacuum-forming orthodontic appliances, mouth guards or other appliances. It is important to be sure your gypsum is properly set and be sure to properly label your models and dies so they stay with the correct case.
CompanyWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix CorporationWhip Mix Corporation
ItemBitestoneFlowStone FS GypsumHard Rock GypsumMounting Stone GypsumSnap-Stone Gypsum
PriceInquireInquireInquireInquireInquire
DescriptionAn extremely fast setting stone for use in mounting casts, and locking gnathological instruments into position. Free flow is held to a minimum in thisFlowstone FS sets 50% faster than typical stone products. Early high strength allows separation from base mold in 15 minutes. Use Flowstone FS with The material is compatible with all types of impression materials. Its high expansion makes it especially suited for polyvinyl or polyether impressionA very hard, fast setting gypsum material formulated expressly for mounting casts to articulators. Its very low setting expansion prevents SNAP-STONE is an exceptionally fast setting stone with an early high compressive strength, which allows separation of the cast from the impression in
Quantity11 kg (25 pounds)
22 kg (50 pounds)		22.7 kg (50 lbs) Carton11 kg (25 pounds)
25 kg (55 pounds)
120 Packages (70 g)		11 kg (25 pounds)
22 kg (50 pounds)
100 Packages (100 g)		5 kg (11 pounds)
11 kg (25 pounds)
22 kg (50 pounds)
80 Packages (140 g)
Compressive Strength7,000 psi (49 MPa)12,000 psi (83 MPa)15,000 psi (104 MPa)8,500 psi (59 MPa)14,000 psi (97 MPa)
Working Time10 - 60 seconds4 - 6 minutes6 - 8 minutes2 - 3 minutes60 - 90 seconds
Set Time1 - 3 minutes8 minutes15 minutes5 minutes2 minutes
Indication For UseMounting Casts
Locking Gnathological Instruments		Fluid, Low Expansion Base StoneCrown & BridgeMounting Casts To ArticulatorsBleaching Trays
Mouth Guards
Vacuum Formed Splints
Custom Tray
Orthodontic Appliances
Temporaries
Denture Repairs
Study Casts
Articulator Cast Mounting
CAD-CAM Restorations
Liquid / Powder Ratio29 mL / 100 g23 - 24 mL / 100 g21 mL / 100 g26 mL / 100 g23 mL / 100 g
Setting Expansion0.15 %0.08%0.28%0.08%0.15%
Get InfoNot AvailableNot AvailableNot AvailableNot AvailableNot Available

Articles

-->