Dental laboratory sandblasters are used to increase bond strength by divesting the casting investment and increasing effective surface area as well as polishing the surface of restorations. Sandblasters used in dental laboratories are enclosed and often operate through a vacuum or via air compressor, with integrated gloves for hand protection and containment of the blast media. Sandblasting media can be Aluminum Oxide, glass beads or Silicone Carbide grit. Be sure to choose a dental laboratory sandblaster that employs proper dust retraction. Some sandblasters can also be used intraorally in a dental operatory. This is referred to as air abrasion, and a sandblaster can be used instead of a handpiece for various procedures. Intraoral dental sandblasters have a variety of angled tips allowing the technician to reach any part of the mouth. These tips should be autoclavable. Be sure that if a product is used intraorally, that it is FDA approved.
Select up to 5 products from below to compare or request more information.
Aixin Medical Equipment Co., Ltd
- Tips: Not Available
- Application: Porcelain Crowns
Porcelain Teeth - Vacuum/Air Supply: Vacuum
Not Available
Aixin Medical Equipment Co., Ltd
- Tips: Not Available
- Application: Not Available
- Vacuum/Air Supply: Not Available
Not Available
Buffalo Dental Manufacturing
- Tips: 60° Tip (.048 inch Diameter)
- Application: Roughening ceramic restorations prior to bonding or repair
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Intraoral
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Not Available
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Intraoral
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Not Available
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Not Available
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Not Available
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Not Available
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Not Available
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Replaceable Carbide
- Application: Not Available
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: 1 Precision Tungsten Carbide Tip
1 Crystal Embedded Tip - Application: Fine Surfacing Of Metal, Porcelain And Acrylic
Removal Of Oxides
Preparation Of Porcelain Faces Before Firing
Deflasking
Alloy Preparation For Porcelain Work
Bulk Removal Of Investment And Tough Oxide Layers
Rough Surface Preparation
Smoothing/Polishing
Devesting Porcelain
Finishing Of Occlusal Surfaces/Crown Interiors - Vacuum/Air Supply: Air Supply
Not Available
- Tips: Medium .8 mm (.032 inches)
Large 1.2 mm (.048 inches)
Extra Large 1.6mm (.065 inches)
- Application: Fine Surfacing Of Metal, Porcelain And Acrylic
Deburring And Deflashing Of Metals And Other Hard Materials
Aggressive Removal Of Materials, Semi-Rough Finished Surface
Bulk Removal Or Surface Cleaning Of Tough Materials
Smoothing/Polishing
Cleans And Polishes Without Removing Material - Vacuum/Air Supply: Air Supply
Not Available
- Tips: Medium .8 mm (.032 inches)
Large 1.2 mm (.048 inches)
Extra Large 1.6mm (.065 inches) - Application: Fine Surfacing Of Metal, Porcelain And Acrylic
Removal Of Oxides
Preparation Of Porcelain Faces Before Firing
Deflasking
Alloy Preparation For Porcelain Work
Bulk Removal Of Investment And Tough Oxide Layers
Rough Surface Preparation
Smoothing/Polishing
Devesting Porcelain
Finishing Of Occlusal Surfaces/Crown Interiors - Vacuum/Air Supply: Air Supply
Not Available
- Tips: Medium .8 mm (.032 inches)
Large 1.2 mm (.048 inches)
Extra Large 1.6mm (.065 inches) - Application: Fine Surfacing Of Metal, Porcelain And Acrylic
Removal Of Oxides
Preparation Of Porcelain Faces Before Firing
Deflasking
Alloy Preparation For Porcelain Work
Bulk Removal Of Investment And Tough Oxide Layers
Rough Surface Preparation
Smoothing/Polishing
Devesting Porcelain
Finishing Of Occlusal Surfaces/Crown Interiors - Vacuum/Air Supply: Air Supply
Not Available
- Tips: Not Available
- Application: Not Available
- Vacuum/Air Supply: Not Available
Not Available
- Tips: Medium .8 mm (.032 inches)
Large 1.2 mm (.048 inches)
Extra Large 1.6 mm (.065 inches) - Application: Fine Surfacing Of Metal, Porcelain And Acrylic
Removal Of Oxides
Preparation Of Porcelain Faces Before Firing
Deflasking
Alloy Preparation For Porcelain Work
Bulk Removal Of Investment And Tough Oxide Layers
Rough Surface Preparation
Smoothing/Polishing
Devesting Porcelain
Finishing Of Occlusal Surfaces/Crown Interiors - Vacuum/Air Supply: Air Supply
Not Available
- Tips: .048 (60°) Nozzle
- Application: Etching All Metals, Composites & Amalgam
Aiding In Intraoral Porcelain Repair
Prepping For Pit & Fissure Restoration
Cleaning Dark Grooves To Reveal Decay
Prepping Incipient Lesions And Minor Class I & V
Debriding Bur Preps For Best Esthetics & Bonds - Vacuum/Air Supply: Air Supply
Not Available
- Tips: .048 Carbide Nozzle
- Application: Not Available
- Vacuum/Air Supply: Air Supply
Not Available
- Tips: Carbide Tip
- Application: Etching All Metals, Composites & Amalgam
Aiding In Intraoral Porcelain Repair
Prepping For Pit & Fissure Restoration
Cleaning Dark Grooves To Reveal Decay
Prepping Incipient Lesions And Minor Class I & V
Debriding Bur Preps For Best Esthetics & Bonds - Vacuum/Air Supply: Not Available
Not Available
- Tips: .048 (60°) Nozzle
- Application: Etching All Metals, Composites & Amalgam
Aiding In Intraoral Porcelain Repair
Prepping For Pit & Fissure Restoration
Cleaning Dark Grooves To Reveal Decay
Prepping Incipient Lesions And Minor Class I & V
Debriding Bur Preps For Best Esthetics & Bonds - Vacuum/Air Supply: Air Supply
Not Available
Select up to 5 products from above to compare or request more information.
Tags:
Please Login or Register to Create Tags